EMG6_09 [ROHM]

General purpose (dual digital transistors); 通用（双数字晶体管）


型号：	EMG6_09
厂家：	ROHM
描述：	General purpose (dual digital transistors) 通用（双数字晶体管）晶体数字晶体管
文件：	总3页 (文件大小：159K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

General purpose (dual digital transistors)

EMG6 / UMG6N / FMG6A

zFeatures

zDimensions (Unit : mm)

1) Two DTC144T chips in a EMT or UMT or SMT package.

EMG6

1.2

1.6

zEquivalent circuit

EMG6 / UMG6N

FMG6

(3)

(2)

(1)

(3)

(4)

(5)

ROHM

EMT5

Each lead has same dimensions

DTr2

DTr1

DTr2

DTr1

(4)

(5)

(2)

(1)

R1=47kΩ

UMG6N

1.25

2.1

zAbsolute maximum ratings (Ta=25°C)

Parameter

Collector-base voltage

Collector-emitter voltage

Emitter-base voltage

Collector current

Symbol

Limits

Unit

VCBO

VCEO

VEBO

0.1Min.

ROHM

UMT5

Each lead has same dimensions

100

EIAJ

: SC-88A

EMG6 / UMG6N

FMG6A

150(TOTAL)

300(TOTAL)

150

Collector power

dissipation

Junction temperature

Storage temperature

°C

Tstg

−55 to +150

FMG6A

zPackage, marking, and packaging specifications

1.6

2.8

Type

Package

EMG6

EMT5

UMG6N

UMT5

FMG6A

SMT5

Marking

0.3Min.

Code

T2R

T148

3000

Basic ordering unit (pieces)

8000

3000

ROHM

EIAJ

SMT5

Each lead has same dimensions

SC-74A

www.rohm.com

2009.02 - Rev.B

1/2

EMG6 / UMG6N / FMG6A

Data Sheet

zElectrical characteristics (Ta=25°C)

Parameter

Collector-base breakdown voltage

Collector-emitter breakdown voltage

Emitter-base breakdown voltage

Collector cutoff current

Symbol

Min.

Typ.

−

Max.

−

Conditions

Unit

BV^CBO

BVCEO

BVEBO

=50µA

=1mA

−

=50µA

CB=50V

EB=4V

CBO

EBO

CE(sat)

−

0.5

0.3

600

−

µA

Emitter cutoff current

Collector-emitter saturation voltage

DC current transfer ratio

−

100

−

C/I

=10mA/1mA

=5V/1mA

250

−

MHz

kΩ

CE/I

Transition frequency

CE=10V, I

= −5mA, f=100MHz

∗

Input resistance

32.9

61.1

−

∗Transition frequency of the device.

zElectrical characteristics curves

VCE

lC/lB=10

500

500m

200m

100m

50m

200

100

Ta=100°C

25°C

−40°C

Ta=100°C

25°C

−40°C

20m

10m

100µ 200µ

500µ 1m

5m 10m 20m

50m 100m

100µ 200µ

500µ 1m

5m 10m 20m

50m 100m

COLLECTOR CURRENT : I (A)

Fig.1 DC current gain vs. collector

current

Fig.2 Collector-emitter saturation

voltage vs. collector current

www.rohm.com

2009.02 - Rev.B

2/2

Appendix

Notes

No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM

Co.,Ltd.

The content specified herein is subject to change for improvement without notice.

The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you

wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM

upon request.

Examples of application circuits, circuit constants and any other information contained herein illustrate the

standard usage and operations of the Products. The peripheral conditions must be taken into account

when designing circuits for mass production.

Great care was taken in ensuring the accuracy of the information specified in this document. However, should

you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no re-

sponsibility for such damage.

The technical information specified herein is intended only to show the typical functions of and examples

of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to

use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no re-

sponsibility whatsoever for any dispute arising from the use of such technical information.

The Products specified in this document are intended to be used with general-use electronic equipment

or devices (such as audio visual equipment, office-automation equipment, communication devices, elec-

tronic appliances and amusement devices).

The Products are not designed to be radiation tolerant.

While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or

malfunction for a variety of reasons.

Please be sure to implement in your equipment using the Products safety measures to guard against the

possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as

derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your

use of any Product outside of the prescribed scope or not in accordance with the instruction manual.

The Products are not designed or manufactured to be used with any equipment, device or system

which requires an extremely high level of reliability the failure or malfunction of which may result in a direct

threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment,

aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear

no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intend-

ed to be used for any such special purpose, please contact a ROHM sales representative before purchasing.

If you intend to export or ship overseas any Product or technology specified herein that may be controlled under

the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.

Thank you for your accessing to ROHM product informations.

More detail product informations and catalogs are available, please contact your nearest sales office.

THE AMERICAS / EUROPE / ASIA / JAPAN

ROHM Customer Support System

www.rohm.com

TEL : +81-75-311-2121

FAX : +81-75-315-0172

21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan

Appendix-Rev4.1

相关型号：