ESR01MZPJ331 [ROHM]

Fixed Resistor, Metal Glaze/thick Film, 0.2W, 330ohm, 50V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 0402, CHIP;


型号：	ESR01MZPJ331
厂家：	ROHM
描述：	Fixed Resistor, Metal Glaze/thick Film, 0.2W, 330ohm, 50V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 0402, CHIP 电阻器
文件：	总8页 (文件大小：568K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Anti-surge chip resistors

ESR series

Datasheet

●

Features

1)Exclusive resistive element pattern and laser trimming technology results in

significantly improved surge resistance characteristics.

2)2kV to 5kV electrostatic discharge resistance.

3)Superior power ratings.

4)ROHM resistors have obtained ISO9001 / ISO / TS16949 certification.

5)Corresponds toAEC-Q200.

●

Products list

Rated Limiting

Operating

Size

Temperature Resistance

Automotive

grade

power element

Resistance range

temperature

range

Part No.

coefficient

tolerance

(70℃) voltage

available

(mm) (inch)

(W)

(V)

(ppm/ ℃)

±100

(%)

F( ±1%)

(Ω)

(℃)

10≦R≦976k (E24/96series)

1M≦R≦2.2M (E24series)

1≦R≦9.1 (E24series)

10≦R≦10M (E24series)

10≦R≦1M (E24/96series)

±100

ESR01 1005 0402 0.20

-55～ +155

Yes

+500/-250 J( ±5%)

±200

±100

±200

±100

±200

±100

±200

±100

±200

±100

±200

J( ±5%)

D( ±0.5%)

F( ±1%)

J( ±5%)

D( ±0.5%)

F( ±1%)

J( ±5%)

D( ±0.5%)

F( ±1%)

J( ±5%)

D( ±0.5%)

F( ±1%)

J( ±5%)

1≦R<10

(E24/96series)

ESR03 1608 0603 0.25

ESR10 2012 0805 0.40

150

-55～ +155

10≦R≦10M (E24/96series)

1≦R≦10M (E24series)

10≦R≦1M (E24/96series)

1≦R≦10M (E24/96series)

1≦R≦10M (E24series)

10≦R≦1M (E24/96series)

1≦R≦10M (E24/96series)

1≦R≦10M (E24series)

10≦R≦1M (E24/96series)

1≦R≦10M (E24/96series)

150

200

-55～ +155

Yes

ESR18 3216 1206

0.5

ESR25 3225 1210 0.66

(E24 series)

1≦R≦10M

*E24 : Standard products, E96 : Custom products.

●

Part Number Description

E S R

1 0

E Z P

1 0 0

Resistance

Part No.

Size (mm [inch])

01(1005[0402])

03(1608[0603])

10(2012[0805])

18(3216[1206])

25(3225[1210])

Packaging specificationscode

Nominal resistance

Resistancecode, 3 or 4 digits.

000denotes jumper type.

Resistance Resistance

tolerance

Packaging Quantity

specifications / Reel

Part No. Code

ESR

D( ±0.5%)

F( ±1%)

J ( ±5%)

(Anti-surge

chip resistors)

Paper tape

(4mmPitch)

ESR01

ESR03

ESR10

ESR18

ESR25

MZP

EZP

JZP

10,000

5,000

4,000

tolerance

code

D,F

4 digits

3 digits

：

Paper tape

(4mmPitch)

：

EX.)

Paper tape

(4mmPitch)

1Ω=1R00 (±1%)

1R0 (±5%)

10Ω=10R0 (±0.5%,±1%)

100 (±5%)

1MΩ=1004 (±0.5%,± 1%)

105 (±5%)

Paper tape

(4mmPitch)

Embossedtape

(4mmPitch)

www.rohm.com

1/4

2016.12 - Rev.G

ESR series

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

Datasheet

●Chip resistor dimensions and markings

■ESR01/03

■ESR10/18/25

There are three or four digits used for the calculation number

according to IEC code and "R" is used for the decimal point.

(Unit:mm)

Marking

Part No.

(mm)

1005

(inch)

existence

+0.05

-0.10

ESR01

0402

0603

0805

1206

1210

1.00±0.05

1.60±0.10

2.00±0.10

3.20±0.15

0.50±0.05

0.35±0.05

0.20±0.10

0.25

No*

ESR03

ESR10

ESR18

ESR25

1608

2012

3216

3225

0.80±0.10

1.25±0.10

1.60±0.15

2.50±0.15

0.45±0.10

0.55±0.10

0.30±0.20

0.30±0.25

0.30±0.20

0.40±0.20

0.50±0.25

No*

Yes

*Onlywith spuare mark

●Land pattern example

(Unit:mm)

Dimensions

Part No.

ESR01

ESR03

ESR10

ESR18

ESR25

0.5

1.0

1.2

2.2

1.3

2.0

2.6

4.0

0.5

0.8

1.15

1.5

2.3

0.4

0.5

0.70

0.9

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

www.rohm.com

2/4

2016.12 - Rev.G

ESR series

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

Datasheet

●Derating curve

When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating curves below.

■ESR01 / 03 / 10 / 18 / 25

●Characteristics

Guaranteedbalue

Resistor ｔype

Test items

Test conditions

Resistance

SeeP.1

20℃

Variationof resistance

withtemperature

SeeP.1

Measurement：+25/-55, +25/+125℃

Test voltageis thesmaller oneof ① or ②

①Ratedvoltage(current)×2.5,(ESR03/10/18/25) 2s

Ratedvoltage(current)×2.0,(ESR01) 2s

②Maximumoverloadvoltage※

Overload

±(2.0％＋0.1Ω)

Anew uniformcoatingof minimumof

95%of thesurfacebeingimmersedand

nosolderingdamage.

Rosin-ethanol solution(25%weight)

Solderingcondition：245±5℃

Durationof immersion：2.0±0.5s

Solderability

ꢀ

Resistanceto

solderingheat

±(1.0％＋0.05Ω)

Noremarkableabnormality ontheappearance.

Solderingcondition：260±5℃

Durationof immersion：10±1s

Rapidchangeof

temperature

±(1.0％＋0.05Ω)

±(3.0％＋0.1Ω)

Test temp：-55℃～+125℃ 5cycle

40℃，93％(Relativehumidity)

Test time：1,000h

Dampheat, steady state

Ratedvoltage(current),70℃

1.5h:ON－0.5h:OFF

Test time：1,000h

Enduranceat 70℃

±(3.0％＋0.1Ω)

155℃

Test time：1000h

Endurance

±(3.0％＋0.1Ω)

±(1.0％＋0.05Ω)

23±5℃ _E0057

Solvent: 2-propanol

Resistancetosolvent

Bendstrengthof

theendfaceplating

±(1.0％＋0.05Ω)

Without mechanical damagesuchas breaks.

EIAJED-4701/300Test method304

Voltage：

2kV(ESR01)

ꢀ

3kV(ESR03/10/18)

5kV(ESR25)

Staticꢀelectric

characteristics

ꢀ

±(5.0％＋0.05Ω)

C：100pF

R：1.5kΩ

Apply cycle：Times.

ComplianceStandard(s) : IEC60115-8

JISC5201-8

※Maximumoverloadvoltage(Test voltage)

ꢀ ꢀ ꢀ ꢀ ꢀ

ESR25

400V

ESR01

100V

ESR03

200V

ESR10

200V

ESR18

400V

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

www.rohm.com

ꢀ

ꢀ ꢀ ꢀ ꢀ ^ꢀ

3/4

2016.12 - Rev.G

ESR series

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

Datasheet

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀ ꢀ ꢀ ꢀ

●Tape dimensions

■Paper tape

(Unit : mm)

Part No.

ESR01

8.0±0.3

3.5±0.05 1.75±0.1

0.7±0.1

1.2±0.1

1.9±0.1

ESR03

ESR10

ESR18

8.0±0.3

1.1±0.1

+0.2

2.4

3.5±0.05 1.75±0.1 1.65

3.5±0.05 1.75±0.1 1.95

-0.1

+0.1

-0.05

-0.1

+0.15

-0.05

3.5

Part No.

+0.1

ESR01

Φ1.5

4.0±0.1

2.0±0.05 2.0±0.05 MAX1.1

+0.1

ESR03

ESR10

ESR18

Φ1.5

4.0±0.1

2.0±0.05 MAX1.1

(Unit : mm)

■Embossed tape

Part No.

8.0±0.3

3.5±0.05 1.75±0.1

3.0±0.1

3.5±0.1

ESR25

+0.1

MAX

1.1

Φ1.5

4.0±0.1

2.0±0.05

●Reel dimensions

(Unit : mm)

Part No.

ESR01

ESR03

ESR10

ESR18

ESR25

-1.5

+1.0

Φ180

Φ60

Φ13±0.2

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

www.rohm.com

ꢀ

ꢀ ꢀ ꢀ ꢀ ^ꢀ

4/4

2016.12 - Rev.G

Datasheet

Notice

Precaution on using ROHM Products

(Note1)

If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment

aircraft/spacecraft, nuclear power controllers, etc.) and whose malfunction or failure may cause loss of human life,

bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales

representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way

responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of

any ROHM’s Products for Specific Applications.

(Note1) Medical Equipment Classification of the Specific Applications

JAPAN

CLASSⅢ

CLASSⅣ

USA

CLASSⅡb

CLASSⅢ

CHINA

CLASSⅢ

2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor

products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities,

adequate safety measures including but not limited to fail-safe design against the physical injury, damage to any

property, which a failure or malfunction of our Products may cause. The following are examples of safety measures:

[a] Installation of protection circuits or other protective devices to improve system safety

[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure

3. Our Products are not designed under any special or extraordinary environments or conditions, as exemplified below.

Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from

the use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use

our Products under any special or extraordinary environments or conditions (as exemplified below), your

independent verification and confirmation of product performance, reliability, etc, prior to use, must be necessary:

[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents

[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust

[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including

Cl2, H2S, NH3, SO2, and NO2

[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves

[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items

[f] Sealing or coating our Products with resin or other coating materials

[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue

of flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for

cleaning residue after soldering

[h] Use of the Products in places subject to dew condensation

4. The Products are not subject to radiation-proof design.

5. Please verify and confirm characteristics of the final or mounted products in using the Products.

6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,

confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power

exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively

affect product performance and reliability.

7. De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the

actual ambient temperature.

8. Confirm that operation temperature is within the specified range described in the product specification.

9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined

in this document.

Precaution for Mounting / Circuit board design

1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect

product performance and reliability.

2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must

be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,

please consult with the ROHM representative in advance.

For details, please refer to ROHM Mounting specification

ꢀ

Notice-PAA-E

Rev.001

Datasheet

ꢀ

PrecautionsRegardingApplication Examplesand External Circuits

1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of

the characteristics of the Products and external components, including transient characteristics, as well as static

characteristics.

2. You agree that application notes, reference designs, and associated data and information contained in this

document are presented only as guidance for Products use. Therefore, in case you use such information, you are

solely responsible for it and you must exercise your own independent verification and judgment in the use of such

information contained in this document. ROHM shall not be in any way responsible or liable for any damages,

expenses or losses incurred by you or third parties arising from the use of such information.

Precaution for Electrostatic

This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take

proper caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will

not be applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment /

solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).

Precaution for Storage / Transportation

1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:

[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2

[b] the temperature or humidity exceeds those recommended by ROHM

[c] the Products are exposed to direct sunshine or condensation

[d] the Products are exposed to high Electrostatic

2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time

period may be degraded. It is strongly recommended to confirm solderability before using Products of which

storage time is exceeding the recommended storage time period.

3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent

leads may occur due to excessive stress applied when dropping of a carton.

4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using

Products of which storage time is exceeding the recommended storage time period.

Precaution for Product Label

QR code printed on ROHM Products label is for ROHM’s internal use only.

Precaution for Disposition

When disposing Products please dispose them properly using an authorized industry waste company.

Precaution for Foreign Exchange and Foreign Trade act

Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and

Foreigntrade act, please consult with ROHM in case of export.

Precaution Regarding Intellectual Property Rights

1. All information and data including but not limited to application example contained in this document is for

reference only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property

rights or any other rights of any third party regarding such information or data.

2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the

Products with other articles such as components, circuits, systems or external equipment (including software).

3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM

or any third parties with respect to the Products or the information contained in this document. Provided, however,

that ROHM will not assert its intellectual property rights or other rights against you or your customers to the extent

necessary to manufacture or sell products containing the Products, subject to the terms and conditions herein.

Other Precaution

1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.

2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior

written consent of ROHM.

3. In no event shall you use in any way whatsoever the Products and the related technical information contained in

the Products or this document for any military purposes, including but not limited to, the development of

mass-destruction weapons.

4. The proper names of companies or products described in this document are trademarks or registered trademarks

of ROHM, its affiliated companies or third parties.

Notice-PAA-E

Rev.001

Datasheet

General Precaution

1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents.

ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising form the use of any

ROHM’s Products against warning, caution or note contained in this document.

2. All information contained in this document not is current as of the issuing date and subject to change without any

prior notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM

sales representative.

3. The information contained in this document is provided on an “as in” basis and ROHM does not warrant that all

information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or

liable for any damages, expenses or losses incurred by you or third parties resulting form inaccuracy or errors of

or concerning such information.

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

Notice – WE

Rev.001

Datasheet

Buy

ESR01MZPF - Web Page

Distribution Inventory

Part Number

Package

Unit Quantity

ESR01MZPF

10000

Minimum Package Quantity

Packing Type

Constitution Materials List

RoHS

10000

Taping

inquiry

Yes

ESR01MZPJ331 [ROHM]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E