MCH155A330JC [ROHM]

CAPACITOR, CERAMIC, MULTILAYER, 50V, C0G, 0.000033uF, SURFACE MOUNT, 0402, CHIP;


型号：	MCH155A330JC
厂家：	ROHM
描述：	CAPACITOR, CERAMIC, MULTILAYER, 50V, C0G, 0.000033uF, SURFACE MOUNT, 0402, CHIP 电容器
文件：	总15页 (文件大小：213K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MCH15

Ceramic capacitors

Multi-layer ceramic chip capacitors

MCH15 (1005 (0402) size, chip capacitor)

zFeatures

1) Miniture, light weight

2) Suitable for mobile devices

3) Lead-free plating terminal

4) No polarity

zQuick Reference

The design and specifications are subject to change without prior notice. Please check the most recent technical

specifications prior to placing orders or using the product. For more detail information regarding packaging style code,

please check product designation.

zThermal compensation

Temperature characteristics

Capacitance

tolerance

Thickness

(mm)

Operating temp. range

°C

Rated voltage

(V)

Part No.

Size code

Capacitance (pF)

(ppm/°C)

code

(

)

∗

0.5 to 3.9 (E24 Series)

120

60(CH)

(CJ)

(± 0.25pF)

to 5 (E24 Series)

1005

(0402)

5.1 to 9.1 (E24 Series)

10 (E24 Series)

−55 to +125

0.5 ± ±0.05

MCH15

A (AN)

0±

(± 0.5pF

)

(CG)(C0G

)

11 to 220 (E24 Series)

270 to 470 (E12 Series)

J( 5%

)

∗±:±0.5pF/0.75pF/2pF/3pF/4pF/5pF/6pF/7pF/8pF/9pF available

zHigh dielectric constant

Temperature

characteristics

Capacitance

tolerance

Operating temp. range

Rated voltage

(V)

Thickness

(mm)

Part No.

Size code

Capacitance (pF)

code

(

°C)

6.3

220 to 6,800 (E6 Series)

10,000 (E6 Series)

220 to 6,800 (E6 Series)

10,000 (E6 Series)

0± 10%

−25 to +125

−55 to +125

(B)

15%

(± 10%)

(

) (X7R)

15,000 to 47,000 (E6 Series)

68,000 to 220,000 (E6 Series)

470,000 to 1,000,000 (E6 Series)

1,000 to 10,000 (E3 Series)

22,000 (E3 Series)

47,000 to 100,000 (E3 Series)

1,000,000 (E3 Series)

1,000 to 10,000 (E3 Series)

22,000 (E3 Series)

47,000 to 100,000 (E3 Series)

15%

−55 to +85

−25 to +85

(X5

)

1005

(0402)

M(± 20%)

MCH15

0.5 ± ±0.05

6.3

+30% , −80%

(F)

(+80% , −20%)

+22% , −82%

(Y5V)

−30 to +85

1,000,000 (E3 Series)

Rev.A

1/14

MCH15

Ceramic capacitors

zExternal dimensions (Unit : mm)

0.1Min.

0.3Min.

0.5± 0.05

1.0± 0.05

zProduct designation

Code Prduct thickness

Packing specification

Reel

Basic ordering unit (pcs.)

10,000

0.5mm

Paper tape(width 8mm, pitch 2mm)

φ180mm (7in.)

Paper tape(width 8mm, pitch 2mm) φ330mm (13in.)

50,000

Bulk case

−

50,000

Reel (

) : compatible with EIAJ ET-7200A

φ180, φ330mm

Bulk case : compatible with EIAJ ET-7201A

Part No.

Packing Style

M C H 1 5

F N 1 0 3 Z K

Rated voltage

Code Voltage

Temperature characteristics code

: Refer to quick reference table.

Capacitance tolerance

Nominal

capacitance

Code

Tolerance

6.3V

10V

16V

25V

50V

0.25pF (0.5 to 5pF)

0.5pF (5.1 to 10pF)

5% (11pF or more)

3-digit

designation

according

to IEC

10%

+80%, −20%

Rev.A

2/14

MCH15

Ceramic capacitors

zProduct No. list

•Thermal compensation capacitors

Temperature

A AN(CG) (COG) (CH) Characteristic

Temperature

Rated voltage (V)

A AN(CG) (COG) (CH) Characteristic

50V

Capacitance

Rated voltage (V)

(pF)

Capacitance

(pF)

50V

Product No.

Tolerance Product thickness (mm)

Product No.

0.5

0.75

1.0

1.1

1.2

1.3

1.5

1.6

1.8

2.0

2.2

2.4

2.7

3.0

3.3

3.6

3.9

4.0

4.3

4.7

5.0

5.1

5.6

MCH155A (AN) 0R5C∗

MCH155A (AN) R75C∗

MCH155A (AN) 010C∗

MCH155A (AN) 1R1C∗

MCH155A (AN) 1R2C∗

MCH155A (AN) 1R3C∗

MCH155A (AN) 1R5C∗

MCH155A (AN) 1R6C∗

MCH155A (AN) 1R8C∗

MCH155A (AN) 020C∗

MCH155A (AN) 2R2C∗

MCH155A (AN) 2R4C∗

MCH155A (AN) 2R7C∗

MCH155A (AN) 030C∗

MCH155A (AN) 3R3C∗

MCH155A (AN) 3R6C∗

MCH155A (AN) 3R9C∗

MCH155A (AN) 040C∗

MCH155A (AN) 4R3C∗

MCH155A (AN) 4R7C∗

MCH155A (AN) 050C∗

MCH155A (AN) 5R1D∗

MCH155A (AN) 5R6D∗

MCH155A (AN) 060D∗

MCH155A (AN) 6R2D∗

MCH155A (AN) 6R8D∗

MCH155A (AN) 070D∗

MCH155A (AN) 7R5D∗

MCH155A (AN) 080D∗

MCH155A (AN) 8R2D∗

MCH155A (AN) 090D∗

MCH155A (AN) 9R1D∗

MCH155A (AN) 100D∗

MCH155A (AN) 110J∗

MCH155A (AN) 120J∗

MCH155A (AN) 130J∗

MCH155A (AN) 150J∗

MCH155A (AN) 160J∗

MCH155A (AN) 180J∗

MCH155A (AN) 200J∗

MCH155A (AN) 220J∗

MCH155A (AN) 240J∗

MCH155A (AN) 270J∗

MCH155A (AN) 300J∗

MCH155A (AN) 330J∗

MCH155A (AN) 360J∗

MCH155A (AN) 390J∗

MCH155A (AN) 430J∗

MCH155A (AN) 470J∗

MCH155A (AN) 510J∗

MCH155A (AN) 560J∗

MCH155A (AN) 620J∗

MCH155A (AN) 680J∗

MCH155A (AN) 750J∗

MCH155A (AN) 820J∗

MCH155A (AN) 910J∗

MCH155A (AN) 101J∗

MCH155A (AN) 111J∗

MCH155A (AN) 121J∗

MCH155A (AN) 131J∗

MCH155A (AN) 151J∗

MCH155A (AN) 161J∗

MCH155A (AN) 181J∗

MCH155A (AN) 201J∗

MCH155A (AN) 221J∗

MCH155A (AN) 271J∗

MCH155A (AN) 331J∗

MCH155A (AN) 391J∗

MCH155A (AN) 471J∗

∗±:±Packaging Code

C (± 0.25pF)

0.5 ± ±0.05

J (

5%)

0.5 ± ±0.05

100

110

120

130

150

160

180

200

220

270

330

390

470

6.2

6.8

7.5

8.2

9.1

D (± 0.5pF)

Rev.A

3/14

MCH15

Ceramic capacitors

•High dielectric constant capacitors

Temperature

CN (R) (B) (X7R) Characteristic

CN (X5R) Characteristic

10V

Capacitance

Rated voltage (V)

(pF)

50V

16V

Product No.

6.3V

Product No.

Tolerance Product thickness (mm)

Product No.

220

330

470

680

1,000

1,500

2,200

3,300

4,700

MCH155CN221K∗

MCH155CN331K∗

MCH155CN471K∗

MCH155CN681K∗

MCH155CN102K∗

MCH155CN152K∗

MCH155CN222K∗

MCH155CN332K∗

MCH155CN472K∗

MCH155CN682K∗

6,800

K (±

10%)

0.5 ± ±0.05

10,000

15,000

22,000

33,000

47,000

68,000

100,000

220,000

470,000

1,000,000

MCH152CN103K∗

MCH153CN153K∗

MCH153CN223K∗

MCH153CN333K∗

MCH153CN473K∗

MCH154CN683K∗

MCH154CN104K∗

MCH154CN224K∗

MCH158CN474K∗

MCH158CN105K∗

∗±:±Packaging Code

Temperature

Rated voltage (V)

FN (F) (Y5V) Characteristic

Capacitance

(pF)

50V

Product No.

25V

16V

6.3V

Product No.

Tolerance Product thickness (mm)

Product No.

1,000

2,200

4,700

MCH155FN102Z∗

MCH155FN222Z∗

MCH155FN472Z∗

MCH155FN103Z∗

10,000

22,000

47,000

100,000

1,000,000

Z (+

80%,

−

20%)

0.5 ± ±0.05

MCH152FN223Z∗

MCH153FN473Z∗

MCH153FN104Z∗

MCH158FN105Z∗

∗±:±Packaging Code

Rev.A

4/14

MCH15

Ceramic capacitors

•Performance and test method

No.

Items

Performance

Test Method

(As per JIS C 5101-1, JIS C 5101-10)

Appearance and

dimensions

No marked defects shall be allowed As per 4.4 of JIS C 5101-1.

for appearance. As per 4.5 of JIS C 5101-10

Dimensions shall be as specified the Using a Magnifier.

clause 4.

Withstanding voltage

No dielectrical breakdown or other

damage shall be allowed.

As per 4.6 of JIS C 5101-1.

As per 4.6.4 of JIS C 5101-10

Voltage shall be applied as per Table1.

Table 1

Charac-

teristic

Voltage

300% Rated voltage

250% Rated voltage

A (AN)

Voltage shall be applied for 1 to 5s with

50mA charging and discharging current.

Insulation resistance

Capacitance

As per 4.5 of JIS C 5101-1.

As per 4.6.3 of JIS C 5101-10

Measurements shall be made after

60+/−5s period of the rated voltage

applied.

Not less than 10000MΩ or

500MΩ±±±µF, whichever is less.

(For products with rated voltage less

than 16V, it is not less than 10000MΩ

or 100MΩ±±±µF, whichever is less.)

Capacitance shall be

As per 4.7 of JIS C 5101-1.

within specified tolerance range.

As per 4.6.1 of JIS C 5101-10

Measurements shall be made under the

conditions specified in Table 2.

Table 2

Charac-

teristic

Frequency Voltage

1000 pF

> 1000 pF

1+/−0.1kHz

−

1+/−0.1MHz

A (AN)

1+/−0.1Vrms. 1+/−0.1Vrms.

1+/−0.1kHz

1+/−0.1Vrms.

Dielectric loss tangent

As per 4.8 of JIS C 5101-1.

A (AN) Capacitance 30pF

As per 4.6.2 of JIS C 5101-10

Measurements shall be made under the

conditions specified in Table 2.

tan δ 100/(400+20C)%

−

Capacitance 30pF

−

tan δ 0.1%

−

C N

F N

Rated voltage 25V

−

tan δ 3.0%

−

Rated voltage 16V

−

tan δ 5.0%

−

Rated voltage=50V

tan δ 5.0%

−

Rated voltage=25V

tan δ 7.5%

−

Rated voltage=16V

tan δ 10.0%

−

Rev.A

5/14

MCH15

Ceramic capacitors

No.

Items

Performance

Test Method

(As per JIS C 5101-1, JIS C 5101-10)

C0G

0+/−30ppm / °C

Temperature

characteristic

A (AN)

As per 4.24 of JIS C 5101-1

(−55°C to +125°C)

As per 4.7 of JIS C 5101-10

Temperature coefficient shall be calculated

at 20°C and 85°C.

0+/−60ppm / °C

(−55°C to +125°C)

0+/−120ppm / °C

(−55°C to +125°C)

+/−15%

X7R

As per 4.24 of JIS C 5101-1

As per 4.7 of JIS C 5101-10

If required, measurements shall be made

at a given temperature.

C N

(−55°C to +125°C)

+/−10%

(−25°C to +85°C)

+/−15%

X5R

(−55°C to +85°C)

+30%, −80%

F N

(−25°C to +85°C)

+22%, −82%

Y5V

(−30°C to +85°C)

Solderability

More than 3/4 of each end

termination shall be covered with

new solder.

As per 4.15.2 of JIS C 5101-1

As per 4.11 of JIS C 5101-10

The solder specified in JIS Z 3282 H63A

shall be used. Ans the flux containing 25%

rosin and ethanol solution shall be used.

The specimens shall be immersed into the

solder at 235+/−5°C for 2+/−0.5s

So that both end terminations are

completely under solder.

Resistance Appearance Without mechanical damage.

As per 4.14 of JIS C 5101-1

to solderin

heat

As per 4.10 of JIS C 5101-10

The solder specified in JIS Z 3282. H63A

shall be used.

The specimens shall be immersed into the

solder at 260+/−5°C for 5+/−0.5s so that

both end terminations are completely

under the solder.

Pre-heating at 150+/−10°C for 1 to 2min

Initial measurements prior to test shall be

performed after the thermal

Within +/−2.5% or

+/−0.25pF whichever

is larger.

Change

rate from

initial value

A (AN)

C N

Within +/−7.5%

Within +/−20%

F N

Pre-conditioning specified in Remarks (1).

Final measurements shall be made after the

specimens have been left at room

temperature as per Table3.

Dielectric

loss

tangent

Within specified initial value.

Table3

Insulation

resistance

Charac-

teristic

Time

A (AN)

24+/−2 h

48+/−4 h

Withstanding No defects shall be allowed.

voltage

CN, FN

End termination

adherence

Without peeling or sign of

peeling shall be allowed

on the end terminations.

As per 4.13 of JIS C 5101-1

As per 4.8 ofJIS C 5101-10

A 5N weight for 10+/−1s shall be applied

to the soldered specimens as shown by the

arrow mark in the below sketch.

Applied pressure

Substrate

Capacitor

Rev.A

6/14

MCH15

Ceramic capacitors

No.

Items

Performance

Test Method

(As per JIS C 5101-1, JIS C 5101-10)

Bending

strength

Appearance Without mechanical damage.

As per 4.35 of JIS C 5101-1

As per 4.9 of JIS C 5101-10

Glass epoxy board with soldered

specimens shall be bent till 1mm by

1.0mm/s.

Vibration

Appearance Without mechanical damage.

As per 4.17 of JIS C 5101-1

The specimens shall be soldered on the

specified test jig.

Initial measurements shall be made after

the thermal pre-conditioning specified in

Remarks(1).

Capacitance shall be

Change

A (AN)

within specified

tolerance range.

rate from

initial value

Final measurements shall be made after the

specimens have been left at room

temperature as per Table3.

[Condition]

Directions : 2h each in X, Y and Z directions

Total : 6h

Frequency range : 10 to 55 to 10Hz(1min)

Applitude : 1.5mm

(shall not exceed acceleration196m/s²)

C N

Within +/−7.5%

Within +/−20%

F N

Dielectric

loss

tangent

Within specified initial value.

Table3

Charac-

teristic

Time

A (AN)

24+/−2 h

48+/−4 h

CN, FN

Temperature Appearance Without mechanical damage.

cycling

As per 4.16 of JIS C 5101-1

As per 4.12 of JIS C 5101-10

The specimens shall be soldered on the test

jig shown in Remarks.

Temperature cycle : 100cycles Initial

measurements prior to test shall be

performed after the thermal

per-conditioning specified in Remarks (1).

Final measurements shall be made after the

specimens have been left at room

temperature as per Table3.

Change

rate from

initial value

A (AN)

Within +/−2.5% or

+/−0.25pF whichever

is larger.

C N

F N

Within +/−7.5%

Within +/−20%

Test condition

Step

Temp. (°C)

Min operating temp.

Room temp.

Time (min)

30+/−3

Dielectric

loss

Within specified initial value.

−

tangent

Max operating temp.

Room temp.

30+/−3

Insulation

resistance

−

Table3

Withstanding No defects shall be allowed.

voltage

Charac-

teristic

Time

A (AN)

24+/−2 h

48+/−4 h

CN, FN

Rev.A

7/14

MCH15

Ceramic capacitors

No.

Items

Performance

Test Method

(As per JIS C 5101-1, JIS C 5101-10)

Humidity

(Steady)

Appearance Without mechanical damage.

Change

rate from

initial value

As per 4.22 of JIS C 5101-1

JIS C 5101-10

Test temperature : 60+/−2°C

Relative humidity : 90 to 95%

A (AN)

Within +/−5.0% or

+/−0.5pF whichever

is larger.

Test time

: 500 +24/−0 h

Initial measurements prior to test shall

be made after the voltage

pre-conditioning specified in

Remarks (2).

C N

F N

Within +/−12.5%

Within +/−30%

Final measurements have been left at

room temperature as per Table3.

tan δ 0.3%

Dielectric

tangent

A (AN)

C N

−

Less than 200% of

initial spec.

Table3

Charac-

Time

Less than 150% of

initial spec.

F N

teristic

A (AN)

24+/−2 h

48+/−4 h

Insulation

resistance

Not less than 1000MΩ±or

50MΩ±±±µF, whichever is less.

(For products with rated

CN, FN

voltage less than 16V, it is not less

than 1000MΩ±or 10MΩ±±±µF,

whichever is less.)

Humidity

life test

Appearance Without mechanical damage.

Change

rate from

initial value

As per 4.22 of JIS C 5101-1

As per 4.14 of JIS C 5101-10

Test temperature : 60+/−2°C

Relative humidity : 90 to 95%

Voltage : Rated voltage

Within +/−7.5% or

+/−7.5pF whichever

is larger.

A (AN)

Test time : 500 +24/−0 h

Initial measurements prior to test shall

be made after the voltage

pre-conditioning specified in

Remarks (2).

Final measurements shall be made after

the specimens have been left at room

temperature as per Table3.

Within +/−12.5%

Within +/−30%

C N

F N

Dielectric

loss

tangent

A (AN)

tan δ 0.5%

−

C N

F N

Less than 200% of

initial spec.

Table3

Less than 150% of

initial spec.

Charac-

Time

teristic

Insulation

resistance

Not less than 500MΩ±or

A (AN)

24+/−2 h

48+/−4 h

25MΩ±±±µF, whichever is less.

(For products with rated voltage less

than 16V, it is not less than 500mΩ

or 5MΩ±±±µF, whichever is less.)

CN, FN

Rev.A

8/14

MCH15

Ceramic capacitors

No.

Items

Performance

Test Method

(As per JIS C 5101-1, JIS C 5101-10)

15 Heat life

test

Appearance Without mechanical damage.

As per 4.23 of JIS C 5101-1.

As per 4.15 of JIS C 5101-10

Change

Within +/−3.0% or

+/−0.3pF whichever

is larger.

rate from

initial value

A (AN)

Test

Voltage

Test

time (h)

temperature(°C)

C N

F N

Within +/−15%

Within +/−30%

A (AN)

125

200%

Rated

voltage

200%

Rated

voltage

200%

Rated

voltage

200%

Rated

voltage

1000

±±±±+48/−0

1000

±±±±+48/−0

Dielectric

loss

tangent

tan δ 0.3%

A (AN)

C N

125

−

Less than 200% of

initial spec.

1000

±±±±+48/−0

Less than 150% of

initial spec.

F N

Initial measurements prior to test shall be

made after the voltage pre-conditioning

specified in Remarks (2).

Final measurements shall be made after

the specimens have been left at room

Insulation

resistance

Not less than 1000MΩ±or

50MΩ±±±µF, whichever is less.

(For products with rated voltage less

than 16V, it is not less than 1000mΩ temperature

or 10MΩ±±±µF, whichever is less.)

Table3

Time

Charac-

teristic

A (AN)

24+/−2 h

48+/−4 h

CN, FN

[Remarks]

Pre-conditioning

If specified in test method of as per 3(Performance and test merhod), capacitors of CN, FN

characteristics shall be pre-conditionded as follows.

(1) Thermal pre-conditioning

Prior to initial measurements, specimens shall be conditioned at a temperature of 150 0/−10°C

for a period of 1hr., and shall be allowed to stabilize at room temperature for 48+/−4h

(2) Voltage pre-conditioning

Prior to initial measurements, voltage specified as a test condition shall be applied to specimens

for a period of 1hr., and the specimens shall be allowed to stabilize at room temperature for 48+/−4h

< T e s t j i g >

Soldering

Glass epoxy

substrate

Rev.A

9/14

MCH15

Ceramic capacitors

zPackaging specifications

Taping dimensions

Reel dimensions

+1.0

9.0

−0

9.5 0.5

−

Pulling direction

Label pasting

Symbol

0.7

0.8

8.0

3.5

1.75

2.0

4.0

φ1.5

As per EIAJ ET−7200A

Dimensions

+/±−0.2 +/±−0.05 +/±−0.1 +/±−0.05 +/±−0.05 +/±−0.1 +0.1/±−0

+/±−0.05 MAX.

(Unit : mm)

Symbol

Style

0.62

+/±−0.05

1.12

+/±−0.05

MCH15

(Unit : mm)

(1) The quantity for one reel is as bellows.

Paper tape

Quantity Symbol

Kind of reel

Series

φ180 reel

φ330 reel

MCH15 10,000 pcs.

MCH15 50,000 pcs.

(2) When the tape is pulled out towards the operator with the cover tape facing

upward, the feeding holes shall be found on the right portion of the tape.

(3) Specification of beginning and ending of the tape are as follows.

Ending(reel's center)

Beginning(reel's round)

: Approx. Over 300mm (no chips)

: Approx. Over 270mm (no chips)

: Approx. 30mm (no pasted tape)

: Approx. 260mm (cover tape only)

(4) No juncture of tape shall be allowed.

(5) The share strength of tape shall be more than 5N at the break down strength.

(6) The peel strength of the cover tape shall be 0.1 to 0.7(N) when the cover tape are

peeled 0 to 15° degree from the surface.

(7) The number of missing components shall not exceed 0.1% of the total number

of components (marked number) or one whichever is the larger, and no consecutive

missing exceeding two is allowed.

(8) The reels made from resin shall be used, as per EIAJ ET-7200A.

Rev.A

10/14

MCH15

Ceramic capacitors

zBulk case

Bulk case

Bulk case dimensions (As per EIAJ ET-7201A)

Knob

Shutter

Coupled portion

Symbol

Dimensions 110

(Unit : mm)

(a)Quantity of package

Style

Quantity (pcs)

dimensions(mm)

MCH15

0.5

50,000 +10/−0

zMarking

No marking shall be performed on the chip.

Trademark, parts number, quantity, lot No. , and country of origin shall be labeled on each reel, bulk case.

zNumbering system for LOT No.

(1)

(2)

A0001

(3)

(4)

Example

(1) The end of the Christian Era < two digits> of production finish.

(2) Week in completing part of production finish.

(3) Manufacture continuity number.

(4) The symbol of manufacturing plant.

Rev.A

11/14

MCH15

Ceramic capacitors

zLabel expression

The Figure below is label expression

< Label Example > Part Number : MCH155A101JK

155

10,000

① Part Number

② Division cord

③ Quantity

④ Lot No.

⑤ The Country of origin

⑥ Inspector

⑦ QR code

⑧ Trademark

zPacking method

1) φ180mm Reel

EIAJ cole

(reel)

Label

[width of 9mm

: 5reel]

(interior box of R-26)

Packing slip

(R-26)

Rev.A

12/14

MCH15

Ceramic capacitors

< Packaging unit >

Dimensions

Packaging

interior box of R-26

Symbol

R-26

195

Quantity of reel in

interior box

Quantity of reel in

box of R-26

A (A’)

B (B’)

C (C’)

185

255

190

185

(Unit : mm)

< Appearance >

Carton

< Accumulation >

You must do accumulation by ten boxes

< Packaging slip >

1. Customer

2. Parts number

3. Quantity

4. Box quantity

5. Trade mark

zWeight / Piece

(Unit : mg)

Size

Item

Thickness

0.5mm

Characteristics

Weight / Piece

1.5

1.2

1.5

1005

(0402)

MCH15

Note) The measured values in the table are for reference only.

Actual weight of these chips may vary slightly lot by lot.

Rev.A

13/14

MCH15

Ceramic capacitors

zElectrical characteristics

A (C0G) Characteristics

1000000

100000

10000

1000

100

1pF

−

10pF

100pF

0.1

−

100

1000

10000

FREQUENCY (MHz)

TEMPERATURE : (°C)

Fig.2 Impedance-frequency

characteristics

Fig.1 Capacitance-temperature

characteristics

10000

1000

100

−10

−20

−30

1,000pF

0.1

10,000pF

0.01

0.001

−80

−40

120

160

100

1000

10000

FREQUENCY (MHz)

TEMPERATURE : (°C)

Fig.3 Capacitance-temperature

characteristics

Fig.4 Impedance-frequency

characteristics

10000

1000

100

−10

−20

−30

−40

−50

−60

−70

−80

1,000pF

0.1

10,000pF

0.01

0.001

100,000pF

−80

−40

120

160

100

1000

10000

TEMPERATURE : (°C)

FREQUENCY (MHz)

Fig.6 Impedance-frequency

characteristics

Fig.5 Capacitance-temperature

characteristics

Rev.A

14/14

Appendix

Notes

No technical content pages of this document may be reproduced in any form or transmitted by any

means without prior permission of ROHM CO.,LTD.

The contents described herein are subject to change without notice. The specifications for the

product described in this document are for reference only. Upon actual use, therefore, please request

that specifications to be separately delivered.

Application circuit diagrams and circuit constants contained herein are shown as examples of standard

use and operation. Please pay careful attention to the peripheral conditions when designing circuits

and deciding upon circuit constants in the set.

Any data, including, but not limited to application circuit diagrams information, described herein

are intended only as illustrations of such devices and not as the specifications for such devices. ROHM

CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any

third party's intellectual property rights or other proprietary rights, and further, assumes no liability of

whatsoever nature in the event of any such infringement, or arising from or connected with or related

to the use of such devices.

Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or

otherwise dispose of the same, no express or implied right or license to practice or commercially

exploit any intellectual property rights or other proprietary rights owned or controlled by

ROHM CO., LTD. is granted to any such buyer.

Products listed in this document are no antiradiation design.

The products listed in this document are designed to be used with ordinary electronic equipment or devices

(such as audio visual equipment, office-automation equipment, communications devices, electrical

appliances and electronic toys).

Should you intend to use these products with equipment or devices which require an extremely high level of

reliability and the malfunction of with would directly endanger human life (such as medical instruments,

transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other

safety devices), please be sure to consult with our sales representative in advance.

About Export Control Order in Japan

Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control

Order in Japan.

In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)

on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.

Appendix1-Rev1.1

MCH155A330JC [ROHM]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E