首页 |元器件品牌

MCR100EZHJS9R1 [ROHM]

Low Ohmic Thick Film Chip Resistors; 低电阻厚膜贴片电阻
MCR100EZHJS9R1
型号： MCR100EZHJS9R1
厂家： ROHM    ROHM
描述：

Low Ohmic Thick Film Chip Resistors
低电阻厚膜贴片电阻
文件： 总7页 (文件大小：137K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Low Ohmic Thick Film Chip Resistors  
MCR Series < General Purpose >  
Features  
1) Very-low ohmic resistance from 47mis in lineup by thick-film resistive element.  
2) ROHM resistors have obtained ISO9001 / ISO / TS16949 certification.  
3) "Automotive" product is AEC-Q200 compliant.  
Size  
Type Code  
Packing  
Specification  
AUTOMOTIVE  
∗Corresponds to  
AEC−Q200  
Part No.  
Quantity / Reel  
GENERAL PURPOSE  
(mm)  
0603  
1005  
1608  
2012  
3216  
3225  
5025  
6432  
(inch)  
0201  
0402  
0603  
0805  
1206  
1210  
2010  
2512  
YRT  
MRT  
ERT  
YZP  
MZP  
EZP  
15,000  
10,000  
MCR006  
MCR01  
MCR03  
MCR10  
MCR18  
MCR25  
MCR50  
MCR100  
Paper tape  
(2mm Pitch)  
Paper tape  
(4mm Pitch)  
5,000  
4,000  
EZH  
EZH  
JZH  
JZH  
JZH  
Embossed tape  
(4mm Pitch)  
∗Please contact us for status of AEC-Q200 on "General purpose" products.  
Part Number Description  
1 0  
E Z H  
J
L
1 R 0  
M C R  
Special part code  
(mm [inch])  
Part No.  
Type Code  
Size  
Resistance  
Tolerance  
Nominal Resistance  
Resistance code, 3 or 4 digits.  
0.1 to 9.1Ω ( 1% )  
0.1 to 0.91Ω ( 5% )  
006 (0603 [0201])  
01 (1005 [0402])  
03 (1608 [0603])  
10 (2012 [0805])  
18 (3216 [1206])  
25 (3225 [1210])  
50 (5025 [2010])  
100 (6432 [2512])  
MCR  
L
(Micro chip resistors)  
F ( 1% )  
J ( 5% )  
Resistance  
tolerance  
Resistance  
S
0.047 to 0.091Ω  
code  
+
Special P / N  
FL, FS, JS  
JL  
:
:
4 digits  
3 digits  
Ex.)  
0.047Ω = R047  
9.1 Ω = 9R10  
(
(
1%, 5% )  
1% )  
9R1 ( 5% )  
www.rohm.com  
2012.11 - Rev.C  
1/6  
c
○ 2012 ROHM Co., Ltd. All rights reserved.  
MCR series - Low Ohmic - < General Purpose >  
Data Sheet  
Products List  
Rated Power Limiting Element Maximum Temperature Resistance  
Operating  
Temperature  
Range  
(70°C)  
Voltage  
Overload  
Voltage  
(V)  
Coefficient Tolerance  
Part No.  
Type Code  
Resistance Range  
Series  
(W)  
(V)  
(ppm / °C  
)
(%)  
(°C)  
600 / −200  
F( 1%)  
1.0Ω to  
9.1Ω  
−55 to +125  
MCR006  
YRT  
MRT  
ERT  
EZH  
EZH  
JZH  
JZH  
0.05  
0.063  
0.1  
0.67  
0.76  
0.95  
1.51  
1.51  
2.13  
2.13  
1.34  
1.52  
1.90  
3.02  
3.02  
4.26  
4.26  
400  
F( 1%)  
1.0Ω  
1.0Ω  
9.1Ω  
9.1Ω  
MCR01  
MCR03  
MCR10  
MCR18  
MCR25  
MCR50  
MCR100  
to  
to  
400  
F( 1%)  
J( 5%)  
500 300  
400 200  
250  
0.047Ω to 0.091Ω  
0.1Ω  
0.13Ω  
0.91Ω  
to  
0.15Ω  
to  
0.25  
0.25  
0.5  
0.047Ω to 0.091Ω  
500 300  
400 200  
250  
0.1Ω  
0.13Ω  
9.1Ω  
F( 1%)  
J( 5%)  
to  
0.15Ω  
to  
E24  
−55 to +155  
500 300  
400 200  
250  
0.047Ω to 0.091Ω  
0.1Ω  
0.13Ω  
0.91Ω  
to  
0.15Ω  
to  
0.047Ω to 0.091Ω  
500 300  
400 200  
250  
0.1Ω  
0.13Ω  
9.1Ω  
F( 1%)  
J( 5%)  
to  
0.15Ω  
to  
300 300  
200  
0.047Ω  
0.1Ω  
0.091Ω  
0.91Ω  
to  
to  
300 300  
200  
0.047Ω  
0.1Ω  
0.091Ω  
9.1Ω  
to  
to  
F( 1%)  
J( 5%)  
500 300  
400 200  
250  
0.047Ω  
0.1Ω  
0.15Ω  
0.091Ω  
0.13Ω  
0.91Ω  
to  
to  
to  
0.5  
500 300  
400 200  
250  
0.047Ω  
0.1Ω  
0.15Ω  
0.091Ω  
0.13Ω  
9.1Ω  
to  
to  
to  
F( 1%)  
J( 5%)  
500 300  
400 200  
250  
0.047Ω  
0.1Ω  
0.15Ω  
0.091Ω  
0.13Ω  
0.91Ω  
to  
to  
to  
−55 to +125  
JZH  
1
3.01  
6.02  
500 300  
400 200  
250  
0.047Ω  
0.1Ω  
0.15Ω  
0.091Ω  
0.13Ω  
9.1Ω  
to  
to  
to  
F( 1%)  
∗Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product  
before using or ordering it.  
www.rohm.com  
2012.11 - Rev.C  
2/6  
c
○ 2012 ROHM Co., Ltd. All rights reserved.  
MCR series - Low Ohmic - < General Purpose >  
Data Sheet  
Chip Resistor Dimensions and Markings  
L
<Marking method>  
There are three or four digits used for the calculation number  
according to IEC code and “R”is used for the decimal point.  
W
t
47Y  
a
b
(Unit : mm)  
Marking  
existence  
Part No.  
Type Code  
(mm)  
(inch)  
L
W
t
a
b
0.6 0.03  
1.0 0.05  
1.6 0.1  
2.0 0.1  
3.2 0.15  
3.2 0.15  
5.0 0.15  
6.3 0.15  
0.3 0.03  
0.5 0.05  
0.8 0.1  
1.25 0.1  
1.6 0.15  
2.5 0.15  
2.5 0.15  
3.2 0.15  
0.23 0.03  
0.35 0.05  
0.45 0.1  
0.55 0.1  
0.55 0.1  
0.55 0.15  
0.55 0.15  
0.55 0.15  
0.15 0.05  
0.2 0.1  
0.3 0.2  
0.4 0.2  
0.5 0.25  
0.5 0.25  
0.6 0.25  
0.6 0.25  
0.15 0.05  
No  
No  
MCR006  
MCR01  
MCR03  
MCR10  
MCR18  
MCR25  
MCR50  
MCR100  
YRT  
MRT  
ERT  
EZH  
EZH  
JZH  
JZH  
JZH  
0603  
1005  
1608  
2012  
3216  
3225  
5025  
6432  
0201  
0402  
0603  
0805  
1206  
1210  
2010  
2512  
+0.05  
0.25  
−0.1  
0.3 0.2  
0.4 0.2  
Yes ∗  
Yes  
Yes  
Yes  
Yes  
Yes  
0.5 0.25  
0.5 0.25  
0.6 0.25  
0.6 0.25  
Symbol for E96 Series nominal resistance value  
Marking method of MCR03  
The description of markings on the chip resistor are as shown below.  
Symbol  
E96  
Symbol  
E96  
Symbol  
E96  
Symbol  
E96  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
178  
182  
187  
191  
196  
200  
205  
210  
215  
221  
226  
232  
237  
243  
249  
255  
261  
267  
274  
280  
287  
294  
301  
309  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
316  
324  
332  
340  
348  
357  
365  
374  
383  
392  
402  
412  
422  
432  
442  
453  
464  
475  
487  
499  
511  
523  
536  
549  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
562  
576  
590  
604  
619  
634  
649  
665  
681  
698  
715  
732  
750  
768  
787  
806  
825  
845  
866  
887  
909  
931  
953  
976  
01  
02  
03  
04  
05  
06  
07  
08  
09  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
100  
102  
105  
107  
110  
113  
115  
118  
121  
124  
127  
130  
133  
137  
140  
143  
147  
150  
154  
158  
162  
165  
169  
174  
①
Marking method :  
･
For the resistance value contained in E96 series.  
The nominal resistance is expressed in 3 digits. The first 2 digits is  
symbol to the resistance value and the last one is symbol to multipliers.  
3
×
Example : 100k = 01d  
  
Example : 3.01k = 47b (47b 301 10 = 3010 = 3.01k )  
(01d 100 10 = 100,000 = 100k )  
  
1
×
   
･
For the resistance value not contained in E96 series and contained  
in E-24 series.  
The marking is expressed by E-24 series in 3 digits and one short bar  
under the last marking letter.  
Example : 390 = 391  
  
Symbol for multipliers  
Symbol  
A
b
C
d
E
F
X
Y
0
1
2
3
4
5
multipliers 10  
10  
10  
10  
10  
10  
10−1  
10−2  
(Unit : mm)  
D
Land pattern Example  
Dimensions  
Part No.  
Type Code  
YRT  
A
B
C
MCR006  
0.3  
0.5  
1.0  
1.2  
2.2  
2.2  
3.8  
5.1  
0.84  
1.3  
2.0  
2.6  
4.0  
4.0  
6.0  
8.1  
0.3  
0.5  
0.8  
1.15  
1.5  
2.3  
2.3  
3.0  
0.27  
0.4  
0.5  
0.7  
0.9  
0.9  
1.1  
1.5  
B
MCR01  
MCR03  
MCR10  
MCR18  
MCR25  
MCR50  
MCR100  
MRT  
ERT  
D
EZH  
land  
C
EZH  
A
JZH  
JZH  
JZH  
www.rohm.com  
2012.11 - Rev.C  
3/6  
c
○ 2012 ROHM Co., Ltd. All rights reserved.  
MCR series - Low Ohmic - < General Purpose >  
Data Sheet  
Derating Curve  
When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating curves below.  
ꢀ
ꢀ
MCR006 / 100  
MCR01 / 03 / 10 / 18 / 25 / 50  
100  
100  
80  
60  
40  
20  
0
80  
60  
40  
20  
0
−55  
0
70  
100 125  
−55  
0
70  
100  
C)  
155  
AMBIENT TEMPERATURE (°C)  
AMBIENT TEMPERATURE (  
°
Characteristics  
Test Items  
Test Conditions  
Guaranteed Value  
See "Products List"  
Resistance  
20°C  
Variation of resistance  
with temperature  
See "Products List"  
Measurement : +20 / −55 / +20 / +125°C  
Rated voltage (current) ×2.5, 2s.  
Maximum overload voltage  
Overload  
(2.0%+0.005Ω)  
Rosin·Ethanol : 25% (weight)  
Soldering condition : 235 5°C  
Duration of immersion : 2.0 0.5s  
A new uniform coating of minimum of  
95% of the surface being immersed  
and no soldering damage.  
Solderability  
(1.0%+0.005Ω)  
Resistance to  
soldering heat  
Soldering condition : 260 5°C  
Duration of immersion : 10 1s  
No remarkable abnormality on the appearance.  
Test temp.  
Rapid change of  
temperature  
(1.0%+0.005Ω)  
(3.0%+0.005Ω)  
−55°C to +125°C 100cycle (MCR006)  
−55°C to +125°C 5cycle (MCR01 / 03 / 10 / 18 / 25 / 50 / 100)  
40°C, 93%RH (Relative Humidity)  
Test time : 1,000h to 1,048h  
Damp heat, steady state  
70°C  
Rated voltage (current)  
1.5h : ON − 0.5h : OFF  
Test time : 1,000h to 1,048h  
Endurance at 70°C  
(3.0%+0.005Ω)  
(3.0%+0.005Ω)  
125°C (MCR006 / 100)  
155°C (MCR01 / 03 / 10 / 18 / 25 / 50)  
Test time : 1,000h to 1,048h  
Endurance  
23 5°C, Immersion cleaning, 5 0.5min  
Solvent : 2−propanol  
(1.0%+0.005Ω) ※MCR006 only  
(0.5%+0.005Ω)  
Resistance to solvent  
Bend strength of  
the end face plating  
Without Open.  
−
Compliance Standard(s) : IEC60115−8  
JISC 5201−8  
Chip weight (typical value)  
MCR006  
YRT  
MCR01  
MRT  
MCR03  
ERT  
MCR10  
EZH  
MCR18  
EZH  
MCR25  
JZH  
MCR50  
JZH  
MCR100  
JZH  
Parameter  
Unit  
Weight  
mg/pc  
0.150  
0.565  
2.03  
5.00  
9.78  
16.5  
25.8  
42.0  
www.rohm.com  
2012.11 - Rev.C  
4/6  
c
○ 2012 ROHM Co., Ltd. All rights reserved.  
MCR series - Low Ohmic - < General Purpose >  
Data Sheet  
Tape Dimensions  
(Unit : mm)  
  
Paper Tape  
Part No.  
Type Code  
W
F
E
A
0
B0  
P
0
MCR006  
YRT  
MRT  
ERT  
EZH  
EZH  
8.0 0.2  
3.5 0.05  
1.75 0.1  
0.38 0.03 0.68 0.03  
P
2
P1  
φD  
0
E
MCR01  
MCR03  
MCR10  
MCR18  
8.0 0.3  
8.0 0.3  
8.0 0.3  
8.0 0.3  
3.5 0.05  
3.5 0.05  
3.5 0.05  
3.5 0.05  
1.75 0.1  
1.75 0.1  
1.75 0.1  
1.75 0.1  
0.7 0.1  
1.0 0.2  
1.2 0.1  
1.8 0.1  
F
W
B0  
+0.2  
1.65  
+0.2  
2.4  
A0  
−0.1  
−0.1  
Top tape  
(Bottom tape)  
+0.1  
1.95  
+0.15  
3.5  
−0.05  
−0.05  
Base paper  
Components  
Cavity  
T2  
Part No.  
Type Code  
YRT  
D
0
P
0
P
1
P
2
T2  
+0.1  
MCR006  
φ1.5  
4.0 0.1  
4.0 0.1  
2.0 0.05  
2.0 0.1  
2.0 0.05  
2.0 0.05  
Max 0.5  
Max 1.1  
0
+0.1  
MCR01  
MCR03  
MCR10  
MCR18  
MRT  
ERT  
EZH  
EZH  
φ1.5  
φ1.5  
φ1.5  
φ1.5  
0
+0.1  
4.0 0.1  
4.0 0.1  
4.0 0.1  
4.0 0.1  
2.0 0.05  
2.0 0.05  
Max 1.1  
Max 1.1  
0
+0.1  
0
+0.1  
4.0 0.1  
4.0 0.1  
2.0 0.05  
Max 1.1  
0
(Unit : mm)  
  
Embossed Tape  
Part No.  
Type Code  
JZH  
W
F
E
A
0
B0  
P0  
P2  
MCR25  
8.0 0.3  
12 0.3  
12 0.3  
3.5 0.05  
1.75 0.1  
3.0 0.1  
3.4 0.2  
3.5 0.2  
3.5 0.1  
5.6 0.2  
6.7 0.2  
D
φ
MCR50  
JZH  
JZH  
5.5 0.05  
5.5 0.05  
1.75 0.1  
1.75 0.1  
MCR100  
A0  
P1  
T2  
Part No.  
Type Code  
JZH  
D
0
P
0
P
1
P
2
T2  
+0.1  
MCR25  
φ1.5  
4.0 0.1  
4.0 0.1  
4.0 0.1  
4.0 0.1  
4.0 0.1  
4.0 0.1  
2.0 0.05  
2.0 0.05  
2.0 0.05  
Max 1.1  
Max 1.1  
Max 1.1  
0
+0.1  
MCR50  
JZH  
JZH  
φ1.5  
φ1.5  
0
+0.1  
MCR100  
0
www.rohm.com  
2012.11 - Rev.C  
5/6  
c
○ 2012 ROHM Co., Ltd. All rights reserved.  
MCR series - Low Ohmic - < General Purpose >  
Data Sheet  
Reel Dimensions  
A
B
D
C
Label  
ACCORDING TO EIAJ ET-7200B  
(Unit : mm)  
Part No. Type Code  
A
B
C
D
YRT  
MRT  
ERT  
EZH  
EZH  
JZH  
JZH  
JZH  
MCR006  
MCR01  
MCR03  
MCR10  
MCR18  
MCR25  
MCR50  
MCR100  
+1.0  
9
0
0
−1.5  
+1.0  
0
φ13 0.2  
φ180  
φ60  
+1.0  
13  
0
www.rohm.com  
2012.11 - Rev.C  
6/6  
c
○ 2012 ROHM Co., Ltd. All rights reserved.  
Notice  
N o t e s  
No copying or reproduction of this document, in part or in whole, is permitted without the  
consent of ROHM Co.,Ltd.  
The content specified herein is subject to change for improvement without notice.  
The content specified herein is for the purpose of introducing ROHM's products (hereinafter  
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,  
which can be obtained from ROHM upon request.  
Examples of application circuits, circuit constants and any other information contained herein  
illustrate the standard usage and operations of the Products. The peripheral conditions must  
be taken into account when designing circuits for mass production.  
Great care was taken in ensuring the accuracy of the information specified in this document.  
However, should you incur any damage arising from any inaccuracy or misprint of such  
information, ROHM shall bear no responsibility for such damage.  
The technical information specified herein is intended only to show the typical functions of and  
examples of application circuits for the Products. ROHM does not grant you, explicitly or  
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and  
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the  
use of such technical information.  
The Products specified in this document are intended to be used with general-use electronic  
equipment or devices (such as audio visual equipment, office-automation equipment, commu-  
nication devices, electronic appliances and amusement devices).  
The Products specified in this document are not designed to be radiation tolerant.  
While ROHM always makes efforts to enhance the quality and reliability of its Products, a  
Product may fail or malfunction for a variety of reasons.  
Please be sure to implement in your equipment using the Products safety measures to guard  
against the possibility of physical injury, fire or any other damage caused in the event of the  
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM  
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed  
scope or not in accordance with the instruction manual.  
The Products are not designed or manufactured to be used with any equipment, device or  
system which requires an extremely high level of reliability the failure or malfunction of which  
may result in a direct threat to human life or create a risk of human injury (such as a medical  
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-  
controller or other safety device). ROHM shall bear no responsibility in any way for use of any  
of the Products for the above special purposes. If a Product is intended to be used for any  
such special purpose, please contact a ROHM sales representative before purchasing.  
If you intend to export or ship overseas any Product or technology specified herein that may  
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to  
obtain a license or permit under the Law.  
Thank you for your accessing to ROHM product informations.  
More detail product informations and catalogs are available, please contact us.  
ROHM Customer Support System  
http://www.rohm.com/contact/  
www.rohm.com  
© 2012 ROHM Co., Ltd. All rights reserved.  
R1120A  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明