MCR100JZHJLR82 [ROHM]

Fixed Resistor, Metal Glaze/thick Film, 1W, 0.82ohm, 3.01V, 5% +/-Tol, 250ppm/Cel, Surface Mount, 2512, CHIP;


型号：	MCR100JZHJLR82
厂家：	ROHM
描述：	Fixed Resistor, Metal Glaze/thick Film, 1W, 0.82ohm, 3.01V, 5% +/-Tol, 250ppm/Cel, Surface Mount, 2512, CHIP 电阻器
文件：	总10页 (文件大小：1027K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Low ohmic thick film chip resistors

MCR series - lowohmic -

Datasheet

●

Features

1)Very-low ohmic resistance from 47mΩ is in lineup by thick-film resistive element.

2)ROHM resistors have obtained ISO9001 / ISO / TS16949 certification.

Size

Automotive

grade

Packaging

Part No.

Type code

Quantity/ Reel

specifications

(mm)

0603

1005

1608

2012

3216

3225

5025

6432

(inch)

0201

0402

0603

0805

1206

1210

2010

2512

available

MCR006

MCR01

MCR03

MCR10

MCR18

MCR25

MCR50

MCR100

YLP

MZP

EZP

EZH

JZH

Paper tape(2mmpitch)

Paper tape(4mmpitch)

Embossed tape(4mmpitch)

15,000

10,000

5,000

4,000

Yes

●Part number description

M C R

1 0

E Z H

1 R 0

Resistance

tolerance

Part No.

Size (mm [inch])

Type code

Special part code

Nominal resistance

Resistance code,3 or 4 digits.

Resistance

006(0603[0201])

01(1005[0402])

03(1608[0603])

10(2012[0805])

18(3216[1206])

25(3225[1210])

50(5025[2010])

100(6432[2512])

F(±1%)

J(±5%)

0.1～ 9.1Ω(±1%)

MCR

0.1～ 0.9Ω(±5%)

(Micro chip

resistors)

tolerance

Resistance

code

0.047～ 0.091Ω

Special P / N

FL, FS, JS

4 digits

3 digits

EX.)

0.047Ω=R047 ( ±1%, ±5%)

9.1Ω=9R10 ( ±1%)

9R1 ( ±5%)

www.rohm.com

1/6

2017.01 - Rev.G

MCR series - lowohmic -

Datasheet

●Products list

Rated

Limiting

element

voltage

(V)

Operating

temperature

range

Temperature Resistance

power

(70℃)

(W)

Resistance range

(Ω)

Type

code

Part No.

coefficient

tolerance

(ppm / ℃)

(%)

(℃)

MCR006

MCR01

MCR03

YLP

MZP

EZP

0.05

0.063

0.1

0.67

0.76

0.95

+600/-200 F( ±1%)

1.0≦R≦9.1

(E24 series)

-55 ～ +125

-55 ～ +155

±400

F( ±1%)

1.0≦R≦9.1

500±300

400±200

±250

500±300

400±200

±250

500±300

400±200

±250

500±300

400±200

±250

300±300

±200

300±300

±200

500±300

400±200

±250

500±300

400±200

±250

J ( ±5%)

F( ±1%)

J ( ±5%)

F( ±1%)

J ( ±5%)

F( ±1%)

J ( ±5%)

F( ±1%)

J ( ±5%)

F( ±1%)

0.047≦R≦0.091 (E24 series)

0.1≦R≦0.13 (E24 series)

0.15≦R≦0.91 (E24 series)

0.047≦R≦0.091 (E24 series)

0.1≦R≦0.13 (E24 series)

0.15≦R≦9.1 (E24 series)

0.047≦R≦0.091 (E24 series)

0.1≦R≦0.13 (E24 series)

0.15≦R≦0.91 (E24 series)

0.047≦R≦0.091 (E24 series)

0.1≦R≦0.13 (E24 series)

0.15≦R≦9.1 (E24 series)

0.047≦R≦0.091 (E24 series)

0.1≦R≦0.91 (E24 series)

0.047≦R≦0.091 (E24 series)

MCR10

EZH

0.25

1.51

-55 ～ +155

MCR18

MCR25

MCR50

EZH

JZH

0.25

0.5

1.51

2.13

-55 ～ +155

0.1≦R≦9.1

(E24 series)

0.047≦R≦0.091 (E24 series)

0.1≦R≦0.13 (E24 series)

0.15≦R≦0.91 (E24 series)

0.047≦R≦0.091 (E24 series)

0.1≦R≦0.13 (E24 series)

0.15≦R≦9.1 (E24 series)

0.047≦R≦0.091 (E24 series)

0.1≦R≦0.13 (E24 series)

0.15≦R≦0.91 (E24 series)

0.047≦R≦0.091 (E24 series)

0.1≦R≦0.13 (E24 series)

0.15≦R≦9.1 (E24 series)

0.5

500±300

400±200

±250

500±300

400±200

±250

MCR100

JZH

3.01

-55 ～ +125

*Design and specifications are subject to change without notice.Carefullycheck the specification sheet supplied with the product

before using or ordering it.

www.rohm.com

2/6

2017.01 - Rev.G

MCR series - lowohmic -

Datasheet

●Chip resistor dimensions and markings

There are three or four digits used for the calculation number

according to IEC code and "R"is used for the decimal point.

(Unit:mm)

Marking

Part No. Type code (mm)

(inch)

0201

existence

MCR006

MCR01

MCR03

MCR10

MCR18

MCR25

MCR50

MCR100

YLP

MZP

EZP

EZH

JZH

0603

1005

1608

2012

3216

3225

5025

6432

0.6±0.03

0.3±0.03

0.23±0.03

0.1±0.05

0.15±0.05

+0.05

0.25

0402

0603

0805

1206

1210

2010

2512

1.00±0.05

1.60±0.10

2.0±0.10

0.50±0.05

0.80±0.10

1.25±0.10

1.60±0.15

2.50±0.15

3.20±0.15

0.35±0.05

0.45±0.10

0.55±0.10

0.55±0.15

0.20±0.10

0.30±0.20

0.4±0.20

-0.10

0.30±0.20

0.4±0.20

3digits

Yes

3.20±0.15

5.00±0.15

6.30±0.15

0.50±0.25

0.60±0.25

0.50±0.25

0.60±0.25

●Land pattern example

(Unit:mm)

Dimensions

Part No.

Type code

YLP

MCR006

0.3

0.5

1.0

1.2

2.2

3.8

5.1

0.84

1.3

2.0

2.6

4.0

6.0

8.1

0.3

0.5

0.8

1.15

1.5

2.3

3.0

0.27

0.4

0.5

0.7

0.9

1.1

1.5

MCR01

MCR03

MCR10

MCR18

MCR25

MCR50

MCR100

MZP

EZP

EZH

JZH

www.rohm.com

3/6

2017.01 - Rev.G

MCR series - lowohmic -

Datasheet

●Derating curve

When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating curves below.

■MCR006 / 100

■MCR01 / 03 / 10 / 18 / 25 / 50

●Characteristics

Test items

Guaranteedvalue

Test conditions

Resistance

See "Products list"

±(2.0％＋0.005Ω)

20℃

Variation of resistance

with temperature

Measurement：+25/-55, +25/+125℃

Rated voltage(current)×2.5， 2s

Maximum overload voltage

Overload

Anew uniform coating of minimum of 95%of

the surface being immersed and no

soldering damage.

Rosin-ethanol solution25%(Wweight)

Soldering condition：245±5℃

Duration of immersion：2.0±0.5s

Solderability

±(1.0％＋0.005Ω)

Soldering condition：260±5℃

Resistance to

soldering heat

No remarkable abnormalityon the appearance. Duration of immersion：10±1s

Test temp：

-55℃～+125℃ 100cycle(MCR006)

-55℃～+125℃ 5cycle(MCR01/03/10/18/25/50/100)

Rapid change of

temperature

±(1.0％＋0.005Ω)

±(3.0％＋0.005Ω)

40 ℃，93％(Relative humidity)

Test time：1,000h～1,048h

Damp heat, steadystate

Rated voltage(current),70℃±3℃

1.5h:ON－0.5h:OFF

Endurance at 70℃

Test time：1,000h～1,048h

125℃(MCR006/100)

Endurance

±(3.0％＋0.005Ω)

155℃(MCR01/03/10/18/25/50)

Test time：1,000h～1,048h

±(1.0％＋0.005Ω)※ MCR006only

±(0.5％＋0.005Ω)

23±5℃, Immersion cleaning, 5±0.5min,

Solvent: 2-propanol

Resistance to solvent

Bend strength of

the end face plating

Without mechanical damage such as breaks.

Compliance Standard(s) : IEC60115-8

JISC 5201-8

※Maximum overload voltage (Test voltage)

MCR006 MCR01 MCR03 MCR10 MCR18 MCR25 MCR50 MCR100

1.34V

1.52V

1.90V

3.02V 3.02V 4.26kV 4.26kV 6.02V

www.rohm.com

4/6

2017.01 - Rev.G

MCR series - lowohmic -

Datasheet

●Tape dimensions

■Paper tape

(Unit : mm)

Type

code

Part No.

MCR006 YLP 8.0±0.2

MCR01 MZP 8.0±0.3

MCR03 EZP 8.0±0.3

MCR10 EZH 8.0±0.3

MCR18 EZH 8.0±0.3

3.5±0.05 1.75±0.1 0.38±0.03 0.68±0.03

3.5±0.05 1.75±0.1

0.7±0.1

1.2±0.1

1.9±0.1

1.1±0.1

+0.2

2.4

3.5±0.05 1.75±0.1 1.65

3.5±0.05 1.75±0.1 1.95

-0.1

+0.1

-0.05

+0.15

-0.05

3.5

Type

code

Part No.

+0.1

MCR006 YLP Φ1.5

MCR01 MZP Φ1.5

MCR03 EZP Φ1.5

MCR10 EZH Φ1.5

MCR18 EZH Φ1.5

4.0±0.1

2.0±0.05 2.0±0.05 MAX0.50

2.0±0.05 2.0±0.05 MAX1.1

4.0±0.1

2.0±0.05 MAX1.1

+0.1

(Unit : mm)

■Embossed tape

Type

Part No.

code

MCR25 JZH 8.0±0.3

MCR50 JZH 12.0±0.3

MCR100 JZH 12.0±0.3

3.5±0.05 1.75±0.1

5.5±0.05 1.75±0.1

3.0±0.1

3.4±0.2

3.5±0.2

3.5±0.1

5.6±0.2

6.7±0.2

Type

code

Part No.

+0.1

MCR25 JZH Φ1.5

MCR50 JZH Φ1.5

MCR100 JZH Φ1.5

4.0±0.1

2.0±0.05 MAX1.1

www.rohm.com

5/6

2017.01 - Rev.G

MCR series - lowohmic -

Datasheet

●Reel dimensions

①MCR 006/01/03/10/18/25/50/100

②MCR 006/01/03/10/18/25

(Unit : mm)

Part No.

MCR006

MCR01

MCR03

MCR10

MCR18

MCR25

MCR50

MCR100

Type code

YLP

MZP

EZP

EZH

JZH

+1.0

-1.5

+1.0

Φ180

Φ60

Φ13±0.2

JZH

+1.0

www.rohm.com

6/6

2017.01 - Rev.G

Notice

Precaution on using ROHM Products

(Note 1)

1. If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment

aircraft/spacecraft, nuclear power controllers, etc.) and whose malfunction or failure may cause loss of human life,

bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales

representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way

responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any

ROHM’s Products for Specific Applications.

(Note1) Medical Equipment Classification of the Specific Applications

JAPAN

USA

CHINA

CLASSⅢ

CLASSⅣ

CLASSⅡb

CLASSⅢ

2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor

products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate

safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which

a failure or malfunction of our Products may cause. The following are examples of safety measures:

[a] Installation of protection circuits or other protective devices to improve system safety

[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure

3. Our Products are not designed under any special or extraordinary environments or conditions, as exemplified below.

Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the

use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our

Products under any special or extraordinary environments or conditions (as exemplified below), your independent

verification and confirmation of product performance, reliability, etc, prior to use, must be necessary:

[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents

[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust

[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,

H2S, NH3, SO2, and NO2

[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves

[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items

[f] Sealing or coating our Products with resin or other coating materials

[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of

flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning

residue after soldering

[h] Use of the Products in places subject to dew condensation

4. The Products are not subject to radiation-proof design.

5. Please verify and confirm characteristics of the final or mounted products in using the Products.

6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,

confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power

exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect

product performance and reliability.

7. De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in

the range that does not exceed the maximum junction temperature.

8. Confirm that operation temperature is within the specified range described in the product specification.

9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in

this document.

Precaution for Mounting / Circuit board design

1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product

performance and reliability.

2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must

be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,

please consult with the ROHM representative in advance.

For details, please refer to ROHM Mounting specification

Notice-PAA-E

Rev.003

Precautions Regarding Application Examples and External Circuits

1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the

characteristics of the Products and external components, including transient characteristics, as well as static

characteristics.

2. You agree that application notes, reference designs, and associated data and information contained in this document

are presented only as guidance for Products use. Therefore, in case you use such information, you are solely

responsible for it and you must exercise your own independent verification and judgment in the use of such information

contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses

incurred by you or third parties arising from the use of such information.

Precaution for Electrostatic

This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper

caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be

applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,

isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).

Precaution for Storage / Transportation

1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:

[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2

[b] the temperature or humidity exceeds those recommended by ROHM

[c] the Products are exposed to direct sunshine or condensation

[d] the Products are exposed to high Electrostatic

2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period

may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is

exceeding the recommended storage time period.

3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads

may occur due to excessive stress applied when dropping of a carton.

4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of

which storage time is exceeding the recommended storage time period.

Precaution for Product Label

A two-dimensional barcode printed on ROHM Products label is for ROHM’s internal use only.

Precaution for Disposition

When disposing Products please dispose them properly using an authorized industry waste company.

Precaution for Foreign Exchange and Foreign Trade act

Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign

trade act, please consult with ROHM in case of export.

Precaution Regarding Intellectual Property Rights

1. All information and data including but not limited to application example contained in this document is for reference

only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any

other rights of any third party regarding such information or data.

2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the

Products with other articles such as components, circuits, systems or external equipment (including software).

3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any

third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM

will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to

manufacture or sell products containing the Products, subject to the terms and conditions herein.

Other Precaution

1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.

2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written

consent of ROHM.

3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the

Products or this document for any military purposes, including but not limited to, the development of mass-destruction

weapons.

4. The proper names of companies or products described in this document are trademarks or registered trademarks of

ROHM, its affiliated companies or third parties.

Notice-PAA-E

Rev.003

Daattaasshheeeett

General Precaution

1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents.

ROHM shall not be in an y way responsible or liable for failure, malfunction or accident arising from the use of a ny

ROHM’s Products against warning, caution or note contained in this document.

2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior

notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s

representative.

3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all

information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or

liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or

concerning such information.

Notice – WE

Rev.001

Datasheet

Buy

MCR18EZHFL - Web Page

Distribution Inventory

Part Number

Package

Unit Quantity

MCR18EZHFL

5000

Minimum Package Quantity

Packing Type

Constitution Materials List

RoHS

5000

Taping

inquiry

Yes

MCR100JZHJLR82 [ROHM]

相关型号：

MCR100JZHJLR91

MCR100JZHJR47

MCR100JZHJR56

MCR100JZHJR82

MCR100JZHJS

MCR100JZHJS0.051OHM

MCR100JZHJS0.056OHM

MCR100JZHJS0.068OHM

MCR100JZHJS0.075OHM

MCR100JZHJS0.082OHM

MCR100JZHJS0.091OHM

MCR100JZHJSR047