MCR18SEQPJ [ROHM]

MCR系列是大功率通用贴片电阻器。该系列实现了与大一号现有产品同等的额定功率保证，是符合AEC-Q200标准的高可靠性车规级产品，拥有从小型1005（0402）尺寸到3216（1206）尺寸的丰富产品阵容。（）内的单位为inch。;


型号：	MCR18SEQPJ
厂家：	ROHM
描述：	MCR系列是大功率通用贴片电阻器。该系列实现了与大一号现有产品同等的额定功率保证，是符合AEC-Q200标准的高可靠性车规级产品，拥有从小型1005（0402）尺寸到3216（1206）尺寸的丰富产品阵容。（）内的单位为inch。电阻器
文件：	总7页 (文件大小：824K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

General purpose chip resistors <High power>

MCRS series

Datasheet

●Features

1) Guaranteed the same rated power as one size larger product by changing

the design of the resistive element.

2) Circuit space can be saved (reducing the area by about 60% by replacing

0603 size with 0402 size)

3) ROHM resistors have obtained ISO9001 / IATF1649 certification

4) Corresponds to AEC-Q200.

certification.

●Products list

Operating

temperature

range

Automotive

grade

Available

Size

Rated power Limiting element

Resistance

tolerance

Temperature coefficient

Resistance range

(70°C)

voltage

Part No.

(AEC-Q200)

(Ω)

(mm)

[inch]

0402

(W)

(V)

(%)

(ppm/°C)

±100

(°C)

F ( ±1% )

J ( ±5% )

10≦Ｒ≦10M (E24/96 series)

0.1

±400

1≦R<10

(E24 series)

MCR01S

MCR03S

1005

1608

-55 ～ +155

Yes

±200

10≦Ｒ≦10M (E24 series)

(Jumper type ) Resistance : Max . 50mΩMax., Rated current ： 1.5A

F ( ±1% )

J ( ±5% )

±100

±400

±200

10≦Ｒ≦10M (E24/96 series)

1.0≦Ｒ<10 (E24 series)

10≦Ｒ≦10M (E24 series)

0.125

150

0603

0805

-55 ～ +155

(Jumper type ) Resistance : Max . 50mΩMax., Rated current ： 2A

F ( ±1% )

J ( ±5% )

±250

±100

±400

±200

1.0≦Ｒ<10

10≦Ｒ≦2.2M (E24/96 series)

1.0≦Ｒ<10 (E24 series)

10≦Ｒ≦10M (E24 series)

(E24 series)

0.25

0.4

200

MCR10S

MCR18S

2012

3216

Yes

(Jumper type ) Resistance : Max . 50mΩMax., Rated current ： 2.5A

F ( ±1% )

J ( ±5% )

±250

±100

±400

±200

1.0≦Ｒ<10

10≦R≦2.2M (E24/96 series)

1.0≦Ｒ<10 (E24 series)

10≦Ｒ≦10M (E24 series)

(E24 series)

1206

-55 ～ +155

(Jumper type ) Resistance : Max . 50mΩMax., Rated current ： 2.5A

Designandspecifications aresubject to change without notice. Carefully check thespecificationsheet supplied

E24 : Standard products, E96 : Build to order

withthe product before using or ordering it.

Rated voltage is determined from the following.

When rated voltage exceeds the limiting element voltage, the limiting element voltage shall be the rated voltage.

Rated voltage = Rated power × Resistance

●Part number description

10S

EQP

1R00

MCR

Resistance

tolerance

Special

part code

Part No.

Size

(mm)

[inch]

Type code

Nominal resistance

Quantity

/ Reel

(pcs)

MCR

01S

03S

10S

18S

(1005)

(1608)

(2012)

(3216)

[0402]

[0603]

[0805]

[1206]

F (±1%)

J (±5%) (Including jumper type)

L(1≦R＜10)^*1

Resistance code, 3 or 4 digits.

000 denotes jumper type.

Packaging

specifications

Part No. Code

MCR01S MQP

MCR03S EQP

MCR10S EQP

MCR18S EQP

*1 Only F class

General Purpose

Chip Resistors

Resistance

code

Paper tape

( 2mmPitch)

Paper tape

( 4mmPitch)

Paper tape

( 4mmPitch)

Paper tape

( 4mmPitch)

Resistance

tolerance

5,000

4 digits

3 digits

EX)

1Ω = 1R00 (±1%)

1R0 (±5%)

9.1Ω = 9R10 (±1%)

9R1 (±5%)

10Ω = 10R0 (±1%)

100 (±5%)

1MΩ = 1004 (±1%)

105 (±5%)

www.rohm.com

1/4

2023.5 - Rev.003

MCRS series

Datasheet

●Chip resistor dimensions and markings

■MCR01S / 03S / 10S / 18S

No marking

(Unit : mm)

(mm)

1005

1608

2012

3216

[inch]

0402

0603

0805

1206

Part No. Type code

0.25+0.05

-0.10

MCR01S

MCR03S

MCR10S

MCR18S

MQP

EQP

1.00±0.05 0.50±0.05 0.35±0.05 0.20±0.10

1.60±0.10 0.80±0.10 0.45±0.10 0.30±0.20 0.30±0.20

2.00±0.10 1.25±0.10 0.55±0.10 0.40±0.20 0.40±0.20

3.20+0.15

1.60±0.15 0.55±0.10 0.50±0.25 0.50±0.25

-0.20

●Land pattern example

(Unit : mm)

Dimensions

Part No.

MCR01S

0.50

1.30

2.00

2.60

4.00

0.50

0.80

1.15

1.50

0.40

0.50

0.70

0.90

MCR03S

MCR10S

MCR18S

1.00

1.20

2.20

www.rohm.com

2/4

2023.5 - Rev.003

MCRS series

Datasheet

●Derating curve

When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating

curves below.

110

100

155°C

-55°C

70°C

-80 -60 -40 -20

20 40 60 80 100 120 140 160 180

Ambient Temperature (°C)

●Characteristics

Guaranteed value

Resistor type Jumper type

Test items

Test conditions

Resistance

See "Products list"

20°C

Variation of resistance

with temperature

Overload

Measurement：+25/-55, +25/+125°C

±(2.0％＋0.1Ω)

MAX. 50mΩ

Test voltage is the smaller one of ① or ②

①Rated voltage(current)×2.5， 2s

②Maximum overload voltage^*2

Solderability

A new uniform coating of minimum of 95% of the

surface being immersed and no soldering damage.

Rosin-ethanol solution(25% mass)

Soldering condition：245±5°C

Duration of immersion：2.0±0.5s

Soldering condition：260±5°C

Duration of immersion：10±1s

Test temp.

Resistance to soldering

heat

±(1.0％＋0.05Ω)

MAX. 50mΩ

No remarkable abnormality on the appearance.

Rapid change of

temperature

±(1.0％＋0.05Ω)

±(3.0％＋0.1Ω)

MAX. 50mΩ

MAX. 100mΩ

-55°C～+125°C 1,000cycles

85°C，85％(Relative humidity)

Test time：1,000h

Damp heat, steady state

Rated voltage(current),70°C±3°C

1.5h:ON－0.5h:OFF

Endurance at 70℃

Test time：1,000h

Endurance

±(3.0％＋0.1Ω)

±(1.0％＋0.05Ω)

MAX. 100mΩ

MAX. 50mΩ

155°C

Test time：1,000h

Resistance to solvent

23±5°C, , Immersion cleaning, 5±0.5min

Solvent: 2-propanol

Bend strength of the end

face plating

Endurance with 90mm width

Deflection：3mm

Without mechanical damage such as breaks.

Compliance Standards: IEC 60115-1 / IEC 60115-8

JIS C 5201-1 / JIS C 5201-8

*2 Maximum overload voltage (Test voltage)

MCR01S MCR03S MCR10S MCR18S

150V

300V

400V

www.rohm.com

3/4

2023.5 - Rev.003

MCRS series

Datasheet

●Tape dimensions

(Unit : mm)

Part No.

MCR01S

MCR03S

MCR10S

MCR18S

Φ1.5+0.1

1.75±0.1

0.7±0.1

1.1±0.1

1.2±0.1

1.9±0.1

4.0±0.1

2.0±0.05

4.0±0.1

2.0±0.05

MAX1.1

8.0±0.3

3.5±0.05

Φ1.5+0.1

1.65+0.2

-0.1

1.95+0.1

-0.05

2.4+0.2

-0.1

3.5+0.15

-0.05

Φ1.5+0.1

●Reel dimensions

(Unit : mm)

Part No.

MCR01S

MCR03S

MCR10S

MCR18S

Φ180 0

-1.5

Φ60 +1.0

9 +1.0

Φ13±0.2

www.rohm.com

4/4

2023.5 - Rev.003

Notice

Precaution on using ROHM Products

1. Our Products are designed and manufactured for application in ordinary electronic equipment (such as AV equipment,

OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you

intend to use our Products in devices requiring extremely high reliability (such as medical equipment ^{(Note 1)}, transport

equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car

accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or

serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.

Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any

damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific

Applications.

(Note1) Medical Equipment Classification of the Specific Applications

JAPAN

USA

CHINA

CLASSⅢ

CLASSⅣ

CLASSⅡb

CLASSⅢ

2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor

products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate

safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which

a failure or malfunction of our Products may cause. The following are examples of safety measures:

[a] Installation of protection circuits or other protective devices to improve system safety

[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure

3. Our Products are designed and manufactured for use under standard conditions and not under any special or

extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way

responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any

special or extraordinary environments or conditions. If you intend to use our Products under any special or

extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of

product performance, reliability, etc, prior to use, must be necessary:

[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents

[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust

[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,

H2S, NH3, SO2, and NO2

[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves

[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items

[f] Sealing or coating our Products with resin or other coating materials

[g] Use of our Products without cleaning residue of flux (Exclude cases where no-clean type fluxes is used.

However, recommend sufficiently about the residue.) ; or Washing our Products by using water or water-soluble

cleaning agents for cleaning residue after soldering

[h] Use of the Products in places subject to dew condensation

4. The Products are not subject to radiation-proof design.

5. Please verify and confirm characteristics of the final or mounted products in using the Products.

6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse, is applied,

confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power

exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect

product performance and reliability.

7. De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in

the range that does not exceed the maximum junction temperature.

8. Confirm that operation temperature is within the specified range described in the product specification.

9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in

this document.

Precaution for Mounting / Circuit board design

1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product

performance and reliability.

2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must

be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,

please consult with the ROHM representative in advance.

For details, please refer to ROHM Mounting specification

Notice-PGA-E

Rev.004

Precautions Regarding Application Examples and External Circuits

1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the

characteristics of the Products and external components, including transient characteristics, as well as static

characteristics.

2. You agree that application notes, reference designs, and associated data and information contained in this document

are presented only as guidance for Products use. Therefore, in case you use such information, you are solely

responsible for it and you must exercise your own independent verification and judgment in the use of such information

contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses

incurred by you or third parties arising from the use of such information.

Precaution for Electrostatic

This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper

caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be

applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,

isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).

Precaution for Storage / Transportation

1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:

[a] the Products are exposed to sea winds or corrosive gases, including Cl₂, H₂S, NH₃, SO₂, and NO₂

[b] the temperature or humidity exceeds those recommended by ROHM

[c] the Products are exposed to direct sunshine or condensation

[d] the Products are exposed to high Electrostatic

2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period

may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is

exceeding the recommended storage time period.

3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads

may occur due to excessive stress applied when dropping of a carton.

4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of

which storage time is exceeding the recommended storage time period.

Precaution for Product Label

A two-dimensional barcode printed on ROHM Products label is for ROHM’s internal use only.

Precaution for Disposition

When disposing Products please dispose them properly using an authorized industry waste company.

Precaution for Foreign Exchange and Foreign Trade act

Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign

trade act, please consult with ROHM in case of export.

Precaution Regarding Intellectual Property Rights

1. All information and data including but not limited to application example contained in this document is for reference

only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any

other rights of any third party regarding such information or data.

2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the

Products with other articles such as components, circuits, systems or external equipment (including software).

3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any

third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM

will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to

manufacture or sell products containing the Products, subject to the terms and conditions herein.

Other Precaution

1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.

2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written

consent of ROHM.

3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the

Products or this document for any military purposes, including but not limited to, the development of mass-destruction

weapons.

4. The proper names of companies or products described in this document are trademarks or registered trademarks of

ROHM, its affiliated companies or third parties.

Notice-PGA-E

Rev.004

Daattaasshheeeett

General Precaution

1. Before you use our Products, you are requested to carefully read this document and fully understand its contents.

ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any

ROHM’s Products against warning, caution or note contained in this document.

2. All information contained in this document is current as of the issuing date and subject to change without any prior

notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales

representative.

3. The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all

information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or

liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or

concerning such information.

Notice – WE

Rev.001

MCR18SEQPJ [ROHM]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E