MG7212WZ [ROHM]
应用: 续流 关于裸芯片的规格和销售,请咨询ROHM销售部门。目前尚未开始网售。;型号: | MG7212WZ |
厂家: | ROHM |
描述: | 应用: 续流 关于裸芯片的规格和销售,请咨询ROHM销售部门。目前尚未开始网售。 |
文件: | 总5页 (文件大小:1565K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MG7212WZ
Datasheet
1200V 50A Insulated Gate Bipolar Transistor
Outline
Wafer
VCES
IC (Nominal)
1200V
50A
VCE(sat) (Typ.)
1.7V
Max. Possible Chips per Wafer
224pcs
Features
Inner Circuit
1) Trench Light Punch Through Type
2) Low Collector - Emitter Saturation Voltage
3) Short Circuit Withstand Time 10μs
(2)
(3)
(1) Gate
(2) Collector
(3) Emitter
(1)
Application
General Inverter
for Industrial Use
Absolute Maximum Ratings
Parameter
Symbol
Value
1200
Unit
Collector - Emitter Voltage, Tj = 25°C
Gate - Emitter Voltage
VCES
VGES
V
V
±30
*1
*1)
Collector Current
A
IC
*2
Pulsed Collector Current
150
A
ICP
Tj
Operating Junction Temperature
*1 Depending on thermal properties of assembly
*2 Pulse width limited by Tjmax.
-40 to +175
°C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
2021.08 - Rev.A
1/3
MG7212WZ
Datasheet
Design Assurance
Values
Typ.
Parameter
Symbol
Conditions
Unit
Min.
10
Max.
-
V
CC ≦ 600V,
GE = 15V,
*3
V
Short Circuit Withstand Time
-
-
μs
tsc
Tj = 25℃
CC ≦ 600V,
V
*3
VGE = 15V,
Short Circuit Withstand Time
8
-
μs
tsc
Tj = 150℃
IC = 150A,VCC = 1050V,
VP = 1200V,VGE = 15V,
RG = 50Ω,Tj = 175℃
Reverse Bias Safe Operating
Area
RBSOA*3
FULL SQUARE
-
*3 Design assurance without measurement
Electrical Characteristics (at Tj = 25°C unless otherwise specified)
Values
Parameter
Symbol
Conditions
Unit
Min.
Typ.
Max.
ICES
V
CE = 1200V, VGE = 0V
Collector Cut - off Current
-
-
-
-
10
±500
7.0
μA
nA
V
Gate - Emitter Leakage
Current
IGES VGE = ±30V, VCE = 0V
VGE(th) VCE = 5V, IC = 7.4mA
Gate - Emitter Threshold
Voltage
5.0
6.0
IC = 50A, VGE = 15V,
Collector - Emitter Saturation
Voltage
*3
Tj = 25°C
VCE(sat)
-
-
-
-
-
-
-
-
1.7
2.2
4230
213
25
2.1
V
Tj = 175°C
Cies VCE = 30V,
Coes VGE = 0V,
-
-
-
-
-
-
-
Input Capacitance
Output Capacitance
pF
nC
Cres
Qg
Reverse transfer Capacitance
Total Gate Charge
f = 1MHz
VCE = 500V,
137
33
Qge IC = 50A,
Qgc VGE = 15V
Gate - Emitter Charge
Gate - Collector Charge
52
*3 Design assurance without measurement
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
2021.08 - Rev.A
2/3
Datasheet
MG7212WZ
Chip Information
②
②
810
①
258
7150
8500
8600
572
675
Unit : μm
: Pad Area
①
②
: Gate Bonding Pad
: Emitter Bonding Pad
Backside : Collector
0.10±0.03
Wafer Size
150mm
Wafer Thickness
Chip Size
0.14±0.01mm
8.60mm×7.00mm
0.10±0.03mm
AlSiCu:4.4μm
Cut Line Width
Top Side Metallization
Back Side Metallization Ti/Ni:0.4μm/Au:0.05μm
Passivation Polyimide
8.60
Unit:mm
Further Electrical Characteristics
Switching characteristics and thermal properties are depending strongly on module design
and mounting technology and can therefore not be specified for a bare die.
This chip data sheet refers to the device data sheet
Technology qualified in TO-247N package.
-
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
2021.08 - Rev.A
3/3
Notice
N o t e s
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifica-
tions.
3) Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products specified in this document are not designed to be radiation tolerant.
7) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
8) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
9) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
10) ROHM has used reasonable care to ensure the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
11) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
12) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
13) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1107
B
Daattaasshheeeett
General Precaution
1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents.
ROHM shall not be in an y way responsible or liable for failure, malfunction or accident arising from the use of a ny
ROHM’s Products against warning, caution or note contained in this document.
2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s
representative.
3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all
information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or
liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or
concerning such information.
Notice – WE
Rev.001
© 2015 ROHM Co., Ltd. All rights reserved.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明