RFN2LAM6S [ROHM]

RFN2LAM6S是适合一般整流用途的快速恢复二极管。;


型号：	RFN2LAM6S
厂家：	ROHM
描述：	RFN2LAM6S是适合一般整流用途的快速恢复二极管。快速恢复二极管
文件：	总7页 (文件大小：754K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Super Fast Recovery Diode

Datasheet

RFN2LAM6S

lSeries

lDimensions (Unit : mm)

lLand Size Figure (Unit : mm)

Standard Fast Recovery

0.10

0.05

2.0

0.17±

2.50±0.20

(1)

lApplications

General rectification

PMDTM

lFeatures

lStructure

Cathode

(2)

1.50±0.20

1) Low forward voltage

0.95±0.10

ROHM : PMDTM

JEDEC : SOD-128

2) Low switching loss

: Manufacture Date

Anode

lTaping Dimensions (Unit : mm)

lConstruction

Silicon epitaxial planar type

lAbsolute Maximum Ratings (T_l= 25°C)

Parameter

Symbol

Conditions

Duty≦0.5

Limits

600

1.5

Unit

V_RM

V_R

I_o

Repetitive peak reverse voltage

Reverse voltage

Direct reverse voltage

Glass epoxy board mounted,

60Hz half sin wave, resistive load

60Hz half sin wave,

T_ｌ=85°C

Average forward rectified current

Non-repetitive forward surge current

Junction temperature

I_FSM

T_j

non-repetitive at T_j=25ºC

150

°C

T_stg

Storage temperature

-55 to +150 °C

lElectrical Characteristics (T_j= 25°C)

Parameter

Forward voltage

Conditions

I_F=1.5A

Symbol

V_F

Min. Typ. Max. Unit

0.8

1.2 1.55

V_R=600V

I_R

Reverse current

I_F=0.5A, I_R=1A, Irr=0.25×I_R

Junction to lead

Reverse recovery time

Thermal resistance

trr

R_th(j-l)

25 °C/W

www.rohm.com

2017.04 - Rev.B

1/4

Datasheet

RFN2LAM6S

lElectrical Characteristic Curves

100000

10000

1000

100

T_j= 150°C

T_j= 125°C

T_j= 150°C

T_j= 125°C

0.1

T_j= 75°C

T_j= 25°C

T_j= 75°C

T_j= 25°C

T_j= -40°C

0.01

0.001

T_j= -40°C

0.1

0.01

100

200

300

400

500

600

500

1000

1500

2000

FORWARD VOLTAGE : V_F(mV)

V_F-I_FCHARACTERISTICS

REVERSE VOLTAGE : V_R(V)

V_R-I_RCHARACTERISTICS

100

1000

100

f = 1MHz

T_a= 25°C

I_FSM

8.3ms

1cyc.

T_j= 25°C

100

NUMBER OF CYCLES

I_FSM-CYCLE CHARACTERISTICS

REVERSE VOLTAGE : V_R(V)

V_R-C_tCHARACTERISTICS

www.rohm.com

2017.04 - Rev.B

2/4

Datasheet

RFN2LAM6S

lElectrical Characteristic Curves

1000

100

20mm x 20mm x 0.8mm glass epoxy(FR-4)

Both side is all covered with copper

I_FSM

(35um thickness)

time

R_th(j-a)

100

R_th(j-l)

T_j= 25°C

100

0.001 0.01

0.1

100 1000

TIME : t(ms)

TIME : t(s)

I_FSM-t CHARACTERISTICS

R_th-t CHARACTERISTICS

V_R

D=t/T

V_R=V_Rmax

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.2

0.0

2.5

2.0

1.5

1.0

0.5

0.0

T_j=150°C

D.C.

V_R

D.C.

D=t/T

D = 0.5

V_R=V_Rmax

D = 0.5

T_j=150°C

half sin wave

D = 0.2

D = 0.1

D = 0.2

D = 0.1

100

125

150

100

125

150

AMBIENT TEMPERATURE : T_a(°C)

LEAD TEMPERATURE : T_l(°C)

DERATING CURVE (I_o-T_a)

DERATING CURVE (I_o-T_l)

www.rohm.com

2017.04 - Rev.B

3/4

Datasheet

RFN2LAM6S

lElectrical Characteristic Curves

4.0

3.5

D.C.

D = 0.5

half sin wave

3.0

2.5

2.0

1.5

1.0

0.5

0.0

D = 0.2

D = 0.1

T_j= 150°C

0.0

0.5

1.0

1.5

2.0

2.5

AVERAGE RECTIFIED

FORWARD CURRENT : I_o(A)

I_o-P_fCHARACTERISTICS

www.rohm.com

2017.04 - Rev.B

4/4

Notice

Precaution on using ROHM Products

1. Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment,

OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you

intend to use our Products in devices requiring extremely high reliability (such as medical equipment ^{(Note 1)}, transport

equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car

accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or

serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.

Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any

damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific

Applications.

(Note1) Medical Equipment Classification of the Specific Applications

JAPAN

USA

CHINA

CLASSⅢ

CLASSⅣ

CLASSⅡb

CLASSⅢ

2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor

products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate

safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which

a failure or malfunction of our Products may cause. The following are examples of safety measures:

[a] Installation of protection circuits or other protective devices to improve system safety

[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure

3. Our Products are designed and manufactured for use under standard conditions and not under any special or

extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way

responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any

special or extraordinary environments or conditions. If you intend to use our Products under any special or

extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of

product performance, reliability, etc, prior to use, must be necessary:

[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents

[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust

[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,

H2S, NH3, SO2, and NO2

[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves

[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items

[f] Sealing or coating our Products with resin or other coating materials

[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of

flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning

residue after soldering

[h] Use of the Products in places subject to dew condensation

4. The Products are not subject to radiation-proof design.

5. Please verify and confirm characteristics of the final or mounted products in using the Products.

6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,

confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power

exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect

product performance and reliability.

7. De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in

the range that does not exceed the maximum junction temperature.

8. Confirm that operation temperature is within the specified range described in the product specification.

9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in

this document.

Precaution for Mounting / Circuit board design

1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product

performance and reliability.

2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must

be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,

please consult with the ROHM representative in advance.

For details, please refer to ROHM Mounting specification

Notice-PGA-E

Rev.003

Precautions Regarding Application Examples and External Circuits

1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the

characteristics of the Products and external components, including transient characteristics, as well as static

characteristics.

2. You agree that application notes, reference designs, and associated data and information contained in this document

are presented only as guidance for Products use. Therefore, in case you use such information, you are solely

responsible for it and you must exercise your own independent verification and judgment in the use of such information

contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses

incurred by you or third parties arising from the use of such information.

Precaution for Electrostatic

This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper

caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be

applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,

isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).

Precaution for Storage / Transportation

1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:

[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2

[b] the temperature or humidity exceeds those recommended by ROHM

[c] the Products are exposed to direct sunshine or condensation

[d] the Products are exposed to high Electrostatic

2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period

may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is

exceeding the recommended storage time period.

3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads

may occur due to excessive stress applied when dropping of a carton.

4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of

which storage time is exceeding the recommended storage time period.

Precaution for Product Label

A two-dimensional barcode printed on ROHM Products label is for ROHM’s internal use only.

Precaution for Disposition

When disposing Products please dispose them properly using an authorized industry waste company.

Precaution for Foreign Exchange and Foreign Trade act

Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign

trade act, please consult with ROHM in case of export.

Precaution Regarding Intellectual Property Rights

1. All information and data including but not limited to application example contained in this document is for reference

only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any

other rights of any third party regarding such information or data.

2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the

Products with other articles such as components, circuits, systems or external equipment (including software).

3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any

third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM

will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to

manufacture or sell products containing the Products, subject to the terms and conditions herein.

Other Precaution

1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.

2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written

consent of ROHM.

3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the

Products or this document for any military purposes, including but not limited to, the development of mass-destruction

weapons.

4. The proper names of companies or products described in this document are trademarks or registered trademarks of

ROHM, its affiliated companies or third parties.

Notice-PGA-E

Rev.003

Daattaasshheeeett

General Precaution

1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents.

ROHM shall not be in an y way responsible or liable for failure, malfunction or accident arising from the use of a ny

ROHM’s Products against warning, caution or note contained in this document.

2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior

notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s

representative.

3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all

information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or

liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or

concerning such information.

Notice – WE

Rev.001

RFN2LAM6S [ROHM]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E