SF3004-EC10A_08 [ROHM]

For Color Photo Printers (300DPI ; dots / inch); 对于彩色照片打印机( 300DPI ;点/英寸)
SF3004-EC10A_08
型号: SF3004-EC10A_08
厂家: ROHM    ROHM
描述:

For Color Photo Printers (300DPI ; dots / inch)
对于彩色照片打印机( 300DPI ;点/英寸)

文件: 总5页 (文件大小:76K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SF3004-EC10A  
Printheads  
For Color Photo Printers  
(300DPI ; dots / inch)  
SF3004-EC10A  
The SF3004-EC10 Series are suitable for small photo printers which can make direct print out from digital still cameras  
and mobile phones. ROHM’s technology based on “Step-free” structure enables battery drive, and high resolution printing  
quality.  
zApplications  
Home printers  
Mobile Photo printers  
Photo kiosk terminals  
“Print club” (color photo printer) terminals  
zFeatures  
1) SF3004-EC10 is drivable with batteries, thanks to it’s low energy consumption.  
2) SF3004-EC10 enables full color printing by keeping the adjacent resistance variation less than ±1.5%.  
3) Employing of the driver IC capable of high-speed data transfer at 3.3 circuit supply voltage makes the gradation  
printing control easier.  
4) High dot reproducibility with step-free structure.  
zExternal dimensions (Unit : mm)  
114.2 0.2  
108.16  
CL  
(5.835)  
(3.02)  
Dot #1280  
Dot #1  
10  
φ
1/4  
SF3004-EC10A  
Printheads  
zEquivalent circuit  
DOT #1280  
DOT #1  
VH  
0.47µF  
GND  
1280  
1153  
1152  
1025  
1024  
897  
896  
769  
768  
641  
640  
513  
512  
385  
384  
257  
256  
129  
128  
1
VDD  
/STB2  
/STB1  
/LAT2  
LATCH REGISTER 2  
LATCH REGISTER 1  
/LAT1  
CLK1  
CLK2  
DI 10  
SHIFT  
REGISTER 10  
SHIFT  
REGISTER 9  
SHIFT  
REGISTER 2  
SHIFT  
REGISTER 1  
DI 9  
DI 8  
DI 7  
DI 6  
DI 5  
To each Shift Register  
DI 4  
DI 3  
DI 2  
DI 1  
THERMISTOR  
TM  
10kB3380K  
GND  
DI No.  
DOT No.  
1280 to 1153  
1152 to 1025  
1024 to 897  
896 to 769  
DI No.  
DOT No.  
640 to 513  
512 to 385  
384 to 257  
256 to 129  
128 to 1  
/STB No.  
DOT No.  
1280 to 641  
640 to 1  
2
1
10  
9
5
4
3
2
1
8
7
6
768 to 641  
Fig.1  
2/4  
SF3004-EC10A  
Printheads  
zPin assignments  
No.  
1
Circuit  
GND  
No.  
2
Circuit  
No.  
3
Circuit  
VH  
VH  
4
V
H
5
GND  
/LAT 2  
DI 10  
DI 7  
6
CLK 2  
/STB 2  
DI 9  
7
GND  
TM  
8
9
10  
13  
16  
19  
22  
25  
28  
11  
14  
17  
20  
23  
26  
29  
12  
15  
18  
21  
24  
27  
30  
DI 8  
DI 6  
DI 5  
DI 4  
DI 3  
DI 2  
DI 1  
VDD  
/STB 1  
CLK 1  
/LAT 1  
GND  
GND  
V
H
VH  
VH  
GND  
zTiming chart  
tw CLK  
CLK  
(CLOCK)  
t setup DI  
t hold DI  
DI(DATA IN)  
"High" : BLACK  
"LOW" : WHITE  
t setup LAT  
t hold LAT  
LAT  
(LATCH)  
"High" : HOLD  
"LOW" : THROUGH  
tw LAT  
t setup STB  
STB  
(STROBE)  
tdo  
tdo  
DRIVER  
OUT  
Fig.2  
3/4  
SF3004-EC10A  
Printheads  
zCharacteristics  
Parameter  
Symbol  
Typical  
108.16  
0.0845  
1280  
2800  
13.3  
Unit  
mm  
Effective printing width  
Dot pitch  
mm  
dots  
Total dot number  
Average resistance value  
Applied voltage  
Rave  
VH  
V
Applied power  
P
O
0.061  
4.5  
W/dot  
ms/line  
ms  
Print cycle  
SLT  
Pulse width  
T
ON  
2.25  
Maximum number of dots energized simultaneously  
Maximum clock frequency  
Maximum rolls diameter  
Running life / pulse life  
Operating temperature  
640  
dots  
MHz  
mm  
16  
10  
2/5×107  
5 to 45  
km/pulses  
°C  
4/4  
Appendix  
Notes  
No technical content pages of this document may be reproduced in any form or transmitted by any  
means without prior permission of ROHM CO.,LTD.  
The contents described herein are subject to change without notice. The specifications for the  
product described in this document are for reference only. Upon actual use, therefore, please request  
that specifications to be separately delivered.  
Application circuit diagrams and circuit constants contained herein are shown as examples of standard  
use and operation. Please pay careful attention to the peripheral conditions when designing circuits  
and deciding upon circuit constants in the set.  
Any data, including, but not limited to application circuit diagrams information, described herein  
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM  
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any  
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of  
whatsoever nature in the event of any such infringement, or arising from or connected with or related  
to the use of such devices.  
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or  
otherwise dispose of the same, no express or implied right or license to practice or commercially  
exploit any intellectual property rights or other proprietary rights owned or controlled by  
ROHM CO., LTD. is granted to any such buyer.  
Products listed in this document are no antiradiation design.  
The products listed in this document are designed to be used with ordinary electronic equipment or devices  
(such as audio visual equipment, office-automation equipment, communications devices, electrical  
appliances and electronic toys).  
Should you intend to use these products with equipment or devices which require an extremely high level  
of reliability and the malfunction of which would directly endanger human life (such as medical  
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers  
and other safety devices), please be sure to consult with our sales representative in advance.  
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance  
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow  
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in  
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM  
cannot be held responsible for any damages arising from the use of the products under conditions out of the  
range of the specifications or due to non-compliance with the NOTES specified in this catalog.  
Thank you for your accessing to ROHM product informations.  
More detail product informations and catalogs are available, please contact your nearest sales office.  
THE AMERICAS / EUROPE / ASIA / JAPAN  
ROHM Customer Support System  
Contact us : webmaster@ rohm.co.jp  
www.rohm.com  
TEL : +81-75-311-2121  
FAX : +81-75-315-0172  
Copyright © 2008 ROHM CO.,LTD.  
21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan  
Appendix1-Rev2.0  

相关型号:

SF3004PT

30A SUPER-FAST GLASS PASSIVATED RECTIFIER
WTE

SF3004PT

30.0 AMPS. Glass Passivated Super Fast Rectifiers
TSC

SF3004PT

SUPER FAST RECTIFIERS
HY

SF3004PT

30.0 Ampere Dual Common Cathode Super Fast Recovery Rectifiers
THINKISEMI

SF3005PT

30A SUPER-FAST GLASS PASSIVATED RECTIFIER
WTE

SF3005PT

30.0 AMPS. Glass Passivated Super Fast Rectifiers
TSC

SF3005PT

SUPER FAST RECTIFIERS
HY

SF3006PT

30A SUPER-FAST GLASS PASSIVATED RECTIFIER
WTE

SF3006PT

30.0 AMPS. Glass Passivated Super Fast Rectifiers
TSC

SF3006PT

SUPER FAST RECTIFIERS
HY

SF3006PT

30.0 Ampere Dual Common Cathode Super Fast Recovery Rectifiers
THINKISEMI

SF3006PTC0

Glass Passivated Super Fast Rectifiers
TSC