TECG1A107M8R [ROHM]
Chip tantalum capacitors with (Fail-safe open structure type); 片式钽电容器(故障安全开放的结构类型)型号: | TECG1A107M8R |
厂家: | ROHM |
描述: | Chip tantalum capacitors with (Fail-safe open structure type) |
文件: | 总7页 (文件大小:143K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Chip tantalum capacitors with (Fail-safe open structure type)
TCFG series C Case
Features
Dimensions (Unit : mm)
1) Safety design by open function built - in.
2) Wide capacitance range
3) Screening by thermal shock.
Anode mark
L
W
1
H
W
2
S
S
+
−
L
W
1
W
2
H
S
Case code
+
+
+
+
2.5 0.2
−
+
−
6.0 0.2
3.2 0.2
2.2 0.1
1.3 0.2
C 6032-27(2412)
−
−
−
Part No. Explanation
1
7
T C
C 1 A
F G
0
M C R
2
4
5
6
1
3
1
2
4
Capacitance
Series name
TCFG
Nominal capacitance in pF in 3 digits : 2significant
figure representing the number of 0's.
Case code
TCFG ·····
C
5
6
Capacitance tolerance
+
M : 20%
−
3
Rated Voltage
4
6.3 10 16
Rated voltage (V)
CODE
Taping
0G 0J 1A 1C
C : Reel width (12mm)
R : Positive electrode on the side opposite to sprocket hole
www.rohm.com
2010.01 - Rev.E
1/6
c
○ 2010 ROHM Co., Ltd. All rights reserved.
TCFG Series C Case
Data Sheet
Capacitance range
TCFG series
Rated voltage (V)
(μF)
4
0G
6.3
0J
10
1A
16
1C
20
1D
22 (226)
33 (336)
47 (476)
68 (686)
100 (107)
150 (157)
220 (227)
C
∗
C
C
C
∗
C
Remark) Case size codes (C) in the above show each size products line-up.
∗ : Under development
Marking
The indications listed below should be given on the surface of a capacitor.
Polarity : The polarity should be shown by bar. (on the anode side)
Rated DC voltage
Nominal capacitance
[C Case]
note 1)
Visual typical example (1) capacitance code (2) voltage code
(1) 100μF
(2) 10V
100
10V
note 2) voltage code and capacitance code are variable with parts number
www.rohm.com
2010.01 - Rev.E
2/6
c
○ 2010 ROHM Co., Ltd. All rights reserved.
TCFG Series C Case
Data Sheet
Characteristics
Test conditions
(based on JIS C5101-1 and JIS C5101-3)
Item
Performance
−55 °C to +125 °C
Voltage reduction when temperature exceeds +85°C
Operating Temperature
Maximum operating temperature +85 °C
with no voltage derating
Rated Voltage (V.DC)
4
6.3 10 16
at 85°C
Category Voltage (V.DC)
2.5
5.0
4
8
6.3 10
13 20
at 125°C
Surge Voltage
at 85°C
DC leakage current
0.5μA or 0.01CV whichever is greater
(Shown in "Standard list")
As per 4.9 JIS C 5101-1
As per 4.5.1 JIS C 5101-3
Voltage : Rated voltage for 1 min
Capacitance tolerance
As per 4.7 JIS C 5101-1
As per 4.5.2 JIS C 5101-3
Measuring frequency : 120 12Hz
Shall be satisfied allowance range.
20%
Measuring voltage
Measuring circuit
: 0.5Vrms, +1.5 to 2V.DC
: DC Equivalent series circuit
As per 4.8 JIS C 5101-1
As per 4.5.3 JIS C 5101-3
Measuring frequency : 120 12Hz
Tangent of loss angle
(Df, tanδ)
Shall be satisfied the voltage on "Standard list"
Shall be satisfied the voltage on "Standard list"
Measuring voltage
Measuring circuit
: 0.5Vrms, +1.5 to 2V.DC
: DC Equivalent series circuit
Impedance
As per 4.10 JIS C 5101-1
As per 4.5.4 JIS C 5101-3
Measuring frequency
Measuring voltage
Measuring circuit
: 100 10kHz
: 0.5Vrms or less
: DC Equivalent series circuit
There should be no significant abnormality.
The indications should be clear.
Resistance to
Appearance
As per 4.14 JIS C 5101-1
As per 4.6 JIS C 5101-3
Dip in the solder bath
soldering heat
L.C
Less than initial limit
Solder temp
Duration
Repetition
: 260 10°C
: 5 0.5s
: 1
ΔC / C
tanδ
Within 10% of initial value
Less than 150% of initial limit
After the specimens, leave it at room temperature for
over 24h and then measure the sample.
Dip in the solder bath
Fail-Safe open unit actuation Within 320°C − 20s
Solder temp : 330 5°C
Temperature Appearance There should be no significant abnormality.
cycle
As per 4.16 JIS C 5101-1
As per 4.10 JIS C 5101-3
Repetition : 5 cycles (1 cycle : steps 1 to 4)
without discontinuation.
L.C
Less than initial limit
Within 20% of initial value
Less than 150% of initial limit
ΔC / C
tanδ
Step
Temp.
Time
+
+
30 3min
1
2
3
4
−55
3°C
−
−
Room temp. 3min. or less
+
+
30 3min
125 2°C
−
−
Room temp. 3min. or less
After the specimens, leave it at room temperature for
over 24h and then measure the sample.
Appearance
There should be no significant abnormality.
The indications should be clear.
As per 4.22 JIS C 5101-1
As per 4.12 JIS C 5101-3
Moisture
resistance
After leaving the sample under such atmospheric
condition that the temperature and humidity are
60 2°C and 90 to 95%RH, respectively, for
500 24h level it at room temperature for over 24h
and then measure the sample.
L.C
Less than initial limit
ΔC / C
tanδ
Within 20% of initial value
Less than 150% of initial limit
www.rohm.com
2010.01 - Rev.E
3/6
c
○ 2010 ROHM Co., Ltd. All rights reserved.
TCFG Series C Case
Data Sheet
Test conditions
(based on JIS C5101-1 and JIS C5101-3)
Item
Performance
Temperature Temp.
−55°C
As per 4.29 JIS C 5101-1
As per 4.13 JIS C 5101-3
Stability
ΔC / C
Within 0/−12%of initial value
tanδ
Shall be satisfied the voltage on "Standard list"
L.C
−
Temp.
+85°C
ΔC / C
Within +12/0%of initial value
tanδ
Shall be satisfied the voltage on "Standard list"
Less than 1000% of initial limit
+125°C
L.C
Temp.
ΔC / C
Within +15/0%of initial value
tanδ
Shall be satisfied the voltage on "Standard list"
Less than 1250% of initial limit
L.C
As per 4.26 JIS C 5101-1
As per 4.14 JIS C 5101-3
Apply the specified surge voltage every 5 0.5min.
for 30 5 s. each time in the atmospheric condition
of 85 2°C.
Surge
Voltage
Appearance There should be no significant abnormality.
L.C
Less than initial value
ΔC / C
tanδ
Within 12%of initial value
Less than 150% of initial limit
Repeat this procedure 1,000 times.
After the specimens, leave it at room temperature
for over 24h and then measure the sample.
Loading at Appearance There should be no significant abnormality.
High
temperature
As per 4.23 JIS C 5101-1
As per 4.15 JIS C 5101-3
L.C
Less than 125% of initial limit
After applying the rated voltage for 2000+72/0h
without discontinuation via the serial resistance
of 3Ω or less at a temperature of 85 2°C, leave
the sample at room temperature/humidity for
over 24h and measure the value.
ΔC / C
tanδ
Within 20%of initial value
Less than 150% of initial limit
Terminal Capacitance The measured value should be stable.
As per 4.35 JIS C 5101-1
As per 4.9 JIS C 5101-3
Strength
Appearance There should be no significant abnormality.
A force is applied to the terminal until it bends
to 1mm and by a prescribed tool maintain the
condition for 5s. (See the figure below.)
(Unit : mm)
20
50
F (Apply force)
R230
1
Thickness 1.6mm
45
45
Adhesiveness
The terminal should not come off.
As per 4.34 JIS C 5101-1
As per 4.8 JIS C 5101-3
Apply force of 5N in the two directions shown
in the figure below for 10 1s after mounting
the terminal on a circuit board.
product
Apply force
a circuit board
www.rohm.com
2010.01 - Rev.E
4/6
c
○ 2010 ROHM Co., Ltd. All rights reserved.
TCFG Series C Case
Data Sheet
Test conditions
(based on JIS C5101-1 and JIS C5101-3)
Item
Performance
Be based on "External dimensions"
Dimensions
Measure using a caliper of JIS B 7505
Class 2 or higher grade.
Resistance to solvents The indication should be clear.
As per 4.32 JIS C 5101-1
As per 4.18 JIS C 5101-3
Dip in the isopropyl alcohol for 30 5s,
at room temperature.
Solderability
3/4 or more surface area of the solder coated
terminal dipped in the soldering bath should be
covered with the new solder.
As per 4.15.2 JIS C 5101-1
As per 4.7 JIS C 5101-3
Dip speed = 25 2.5mm/s
Pre-treatment (accelerated aging) : Leave the
sample on the boiling distilled water for 1h.
Solder temp. : 245 5°C
Duration : 3 0.5s
Solder : M705
Flux : Rosin 25%, IPA 75%
Vibration Capacitance Measure value should not fluctuate during the
measurement.
As per 4.17 JIS C 5101-1
Frequency : 10 to 55 to 10Hz/min.
Amplitude : 1.5mm
Appearance There should be no significant abnormality.
Time : 2h each in X, Y and Z directions
Mounting : The terminal is soldered on a print
circuit board.
Table 1 standard list, TCFG series C Case
(C : 6032)
Leakage
Rated Derated Surge
DF 120Hz
(%)
Impedance
100kHz
current
25°C
Capacitance
120Hz
(μF)
Voltage Voltage
Voltage
@85°C
(V)
Case
code
Tolerance
(%)
Part No.
@85°C @125°C
1WV.60s
(μA)
25°C 125°C
−55°C
(V)
(V)
(Ω)
85°C
12
TCFG C 0J 157 M8R
TCFG C 1A 107 M8R
TCFG C 1C 476 M8R
6.3
10
16
4
8
150
100
47
20
20
20
9.5
10.0
7.5
30
14
12
16
12
10
1.3
1.3
1.6
C
C
C
6.3
10
13
20
10
8
www.rohm.com
2010.01 - Rev.E
5/6
c
○ 2010 ROHM Co., Ltd. All rights reserved.
TCFG Series C Case
Data Sheet
Packaging specifications
A 0.2
3.7
B 0.2
6.4
0.1
4.0
W 0.3
12
E 0.1
1.75
F 0.1
5.5
P
1
0.1
8.0
Case code
C (6032)
t
1
0.1
P
2
0.1
P
0
D0
t
2
0.2
0.3
3.0
2.0
φ1.5
Taping
C case
t
2
Sprocket hole φDo
P2
t
1
P1
P0
E
A
F
W
B
Pull out direction
Packaging style
Case size
Packaging
Taping
Packaging style
Symbol
R
Basic ordering unit
500
C Case
Plastic taping
φ180mm reel
Reel
Plastic reel
15.4 1.0
Label sticking position
EIAJ ET - 7200B
www.rohm.com
2010.01 - Rev.E
6/6
c
○ 2010 ROHM Co., Ltd. All rights reserved.
Notice
N o t e s
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010
A
相关型号:
©2020 ICPDF网 联系我们和版权申明