UCR03EVPFL [ROHM]

罗姆的贴片低阻值电阻系列（UCR系列）是采用厚膜电阻本体的贴片电阻，产品包括从11mΩ的低阻值。它是有着优质额定功率及不受周围环境影响的稳定阻值的低阻值贴片电阻。;


型号：	UCR03EVPFL
厂家：	ROHM
描述：	罗姆的贴片低阻值电阻系列（UCR系列）是采用厚膜电阻本体的贴片电阻，产品包括从11mΩ的低阻值。它是有着优质额定功率及不受周围环境影响的稳定阻值的低阻值贴片电阻。固定电阻器
文件：	总5页 (文件大小：159K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Low Ohmic Compact Thick Film Chip Resistors

UCR18 (3216(1206) size : 1 / 2W)

zFeatures

1) Chip resistors ideal for current detection. (11mΩ to 100mΩ)

2) Unique chip and terminal configuration reduces resistance shifting during the mounting process.

3) Superior rated power.

4) ROHM resistors have approved ISO9001- / ISO/TS 16949- certification

zRatings

Design and specifications are subject to change without notice. Carefully check the specification sheet before using or ordering it.

Item

Conditions

Specifications

0.5W (1 / 2W)

Rated power

Power must be derated according to the power derating curve in

Figure 1 when ambient temperature exceeds 70°C.

at 70°C

100

−55

100

155

AMBIENT TEMPERATURE (°C)

Fig.1

Rated voltage

The voltage rating is calculated by the following equation.

E: Rated voltage (V)

E= P×R

P: Rated power (W)

R: Nominal resistance (Ω)

Nominal resistance

See Table 1.

Operating temperature

−55°C to + 155°C

Table 1

Resistance temperature

coefficient (ppm/°C)

Resistance range

Resistance tolerance

Special specification

(Ω)

0.011 to 0.018 (E24)

0.020 to 0.039 (E24)

0.043 to 0.091 (E24)

0.1

0 to 350

0 to 200

0 to 150

F (±1%)

J (±5%)

zBefore using components in circuits where they will be exposed to transients such as pulse loads (short–duration, high– level loads), be certain to evaluate the

component in the mounted state. In addition, the reliability and performance of this component cannot be guaranteed if it is used with a steady state voltage that

is greater than its rated voltage.

www.rohm.com

2009.03 - Rev.B

1/4

UCR18

Data Sheet

Characteristics

Guaranteed value

Resistor type

Item

Test conditions (JIS C 5201-1)

JIS C 5201-1 4.5

Measuring method : Measure under termination

Under termination

F : 1%

J : 5%

Resistance

Terminal

JIS C 5201-1 4.8

Measurement : −55 / +25 / +125°C

Variation of resistance

with temperature

See Table.1

JIS C 5201-1 4.13

Rated voltage (current) × 2.5, 2s.

Overload

(2.0%+0.005Ω)

JIS C 5201-1 4.17

A new uniform coating of minimum of

95% of the surface being immersed

and no soldering damage.

Rosin·Ethanol (25%WT)

Soldering condition : 235 5°C

Duration of immersion : 2.0 0.5s.

Solderability

JIS C 5201-1 4.18

Soldering condition : 260 5°C

Duration of immersion : 10 1s.

(1.0%+0.005Ω)

No remarkable abnormality on the appearance.

Resistance to

soldering heat

Rapid change of

temperature

JIS C 5201-1 4.19

Test temp. : −55°C to +125°C 5cyc

(1.0%+0.005Ω)

(3.0%+0.005Ω)

JIS C 5201-1 4.24

40°C, 93%RH

Test time : 56 days

Damp heat, steady state

JIS C 5201-1 4.25.1

Rated voltage (current), 70°C

1.5h : ON − 0.5h : OFF

Test time : 1,000h

Endurance at 70°C

(3.0%+0.005Ω)

JIS C 5201-1 4.25.3

155°C

Test time : 1,000h to 1,048h

Endurance

JIS C 5201-1 4.29

23 5°C

Solvent : 2-propanol

Resistance to solvent

(0.5%+0.005Ω)

Bend strength of

the end face plating

Without open.

JIS C 5201-1 4.33

www.rohm.com

2009.03 - Rev.B

2/4

UCR18

Data Sheet

zDimensions (Unit : mm)

(The surface)

R033

No.

Material

Resistive element

(Oxide metal thick film)

Silver thick film electrode

Nickel electrode

0.3 0.2

(The back)

Sn electrode

0.9 0.25

Alumina substrate

Overcoating (Resin)

Mark side

(The cross section)

3.2 0.15

Packaging

Reel

Taping

φD0

Heat crimp cover tape

(Underside paper tape) Chip resistor Square punchout hole

Thick paper

mount

Label

EIAJ ET-7200B compliant

(Unit: mm)

+0.1

−0.05

+0.15

−0.05

8.0±0.3

3.5±0.05

1.75±0.1

1.95

3.5

−1.5

+1.0

φ180

φ60

φ13 0.2

+0.1

4.0±0.1

2.0±0.05

Max. 1.1

φ1.5

www.rohm.com

2009.03 - Rev.B

3/4

UCR18

Data Sheet

zPart No. Explanation

U C R 1 8 E V H J S

Resistance tolerance Special part number

Nominal resistance

Part No.

0.011 to 0.091

Ω

Resistance code, 3 or 4 digits.

000 denotes jumper type.

0.1Ω to

Resistance

tolerance

Resistance

code

FL, FS, JS

4 digits

3 digits

Packaging Specifications Code

Resistance tolerance

J( 5%) F( 1%)

Part No.

Code

Packaging specifications

Paper tape (4mm Pitch)

Reel

Basic ordering unit(pcs)

UCR18

EVH

φ180mm (7in.)

5 000

Reel (

: Standard product

φ180mm) : Compatible with JEITA standard "EIAJ ET-7200B"

www.rohm.com

2009.03 - Rev.B

4/4

Notice

N o t e s

No copying or reproduction of this document, in part or in whole, is permitted without the

consent of ROHM Co.,Ltd.

The content speciﬁed herein is subject to change for improvement without notice.

The content speciﬁed herein is for the purpose of introducing ROHM's products (hereinafter

"Products"). If you wish to use any such Product, please be sure to refer to the speciﬁcations,

which can be obtained from ROHM upon request.

Examples of application circuits, circuit constants and any other information contained herein

illustrate the standard usage and operations of the Products. The peripheral conditions must

be taken into account when designing circuits for mass production.

Great care was taken in ensuring the accuracy of the information speciﬁed in this document.

However, should you incur any damage arising from any inaccuracy or misprint of such

information, ROHM shall bear no responsibility for such damage.

The technical information speciﬁed herein is intended only to show the typical functions of and

examples of application circuits for the Products. ROHM does not grant you, explicitly or

implicitly, any license to use or exercise intellectual property or other rights held by ROHM and

other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the

use of such technical information.

The Products speciﬁed in this document are intended to be used with general-use electronic

equipment or devices (such as audio visual equipment, ofﬁce-automation equipment, commu-

nication devices, electronic appliances and amusement devices).

The Products speciﬁed in this document are not designed to be radiation tolerant.

While ROHM always makes efforts to enhance the quality and reliability of its Products, a

Product may fail or malfunction for a variety of reasons.

Please be sure to implement in your equipment using the Products safety measures to guard

against the possibility of physical injury, ﬁre or any other damage caused in the event of the

failure of any Product, such as derating, redundancy, ﬁre control and fail-safe designs. ROHM

shall bear no responsibility whatsoever for your use of any Product outside of the prescribed

scope or not in accordance with the instruction manual.

The Products are not designed or manufactured to be used with any equipment, device or

system which requires an extremely high level of reliability the failure or malfunction of which

may result in a direct threat to human life or create a risk of human injury (such as a medical

instrument, transportation equipment, aerospace machinery, nuclear-reactor controller,

fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of

any of the Products for the above special purposes. If a Product is intended to be used for any

such special purpose, please contact a ROHM sales representative before purchasing.

If you intend to export or ship overseas any Product or technology speciﬁed herein that may

be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to

obtain a license or permit under the Law.

Thank you for your accessing to ROHM product informations.

More detail product informations and catalogs are available, please contact us.

ROHM Customer Support System

http://www.rohm.com/contact/

www.rohm.com

R0039

相关型号：