UMH5N_1 [ROHM]

General purpose (dual digital transistors); 通用（双数字晶体管）


型号：	UMH5N_1
厂家：	ROHM
描述：	General purpose (dual digital transistors) 通用（双数字晶体管）晶体数字晶体管
文件：	总3页 (文件大小：83K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

UMH5N / IMH5A

Transistors

General purpose (dual digital transistors)

UMH5N / IMH5A

zDimensions (Unit : mm)

zFeatures

1) Two DTC124E chips in a EMT or UMT or SMT

package.

UMH5N

zCircuit schematic

(6) (5) (4)

UMH5N

IMH5A

(3)

(2)

(1)

(4)

(5)

(6)

(1) (2) (3)

(4) (5)

(6)

(3) (2)

(1)

ROHM : UMT6

EIAJ : SC-88

Each lead has same dimensions

R1=R2=22kΩ

zAbsolute maximum ratings (Ta = 25°C)

Parameter

Symbol

Limits

Unit

IMH5A

Supply voltage

Input voltage

−10

Output current

(4) (5) (6)

Collector current

C(MAX)

100

UMH5N

IMH5A

150(TOTAL)

300(TOTAL)

150

∗1

∗2

Power dissipation

Junction temperature

Storage temperature

°C

Tstg

−55 to +150

∗1 120mW per element must not be exceeded.

∗2 200mW per element must not be exceeded.

(3) (2)

(1)

ROHM : SMT6

EIAJ : SC-74

Each lead has same dimensions

zPackage, marking, and packaging specifications

Type

UMH5N

UMT6

IMH5A

SMT6

Package

Marking

Code

T108

3000

Basic ordering unit (pieces)

3000

zElectrical characteristics (Ta = 25°C)

Parameter

Symbol

Min.

−

Typ.

−

Max.

0.5

−

Unit

Conditions

=100µA

=5mA

=0.5mA

I (off)

CC=5V, I

Input voltage

I (on)

=0.2V, I

=10mA, I

=5V

CC=50V, V

=5V, I =5mA

CE=10V, I

Output voltage

Input current

O (on)

−

0.1

−

0.3

0.36

0.5

−

µA

−

Output current

DC current gain

O (off)

=0V

−

Transition frequency

Input resistance

−

250

−

MHz

kΩ

−

= −5mA , f=100MHz

∗

15.4

0.8

28.6

1.2

−

Resistance ratio

R2 / R1

∗ Characteristics of built-in transistor

Rev.C

1/2

UMH5N / IMH5A

Transistors

zElectrical characteristics curves

10m

100

=0.2V

VCC=5V

VO=5V

500

Ta=100°C

25°C

−40°C

Ta=100°C

25°C

−40°C

200

100

500µ

Ta=−40°C

25°C

100°C

200µ

100µ

50µ

20µ

10µ

5µ

500m

200m

100m

2µ

1µ

100µ 200µ 500µ 1m

5m 10m 20m 50m 100m

0.5

1.0

1.5

2.0

2.5

3.0

100µ 200µ

500µ 1m

5m 10m 20m 50m 100m

OUTPUT CURRENT : I (A)

OUTPUT CURRENT : I

(A)

INPUT VOLTAGE : VI(off) (V)

Fig.1 Input voltage vs. output current

(ON characteristics)

Fig.2 Output current vs. input voltage

(OFF characteristics)

Fig.3 DC current gain vs. output

current

lO/lI=20

500m

200m

100m

50m

Ta=100°C

25°C

−40°C

20m

10m

100µ 200µ

500µ 1m

5m 10m 20m 50m 100m

OUTPUT CURRENT : I (A)

Fig.4 Output voltage vs. output

current

Rev.C

2/2

Appendix

Notes

No technical content pages of this document may be reproduced in any form or transmitted by any

means without prior permission of ROHM CO.,LTD.

The contents described herein are subject to change without notice. The specifications for the

product described in this document are for reference only. Upon actual use, therefore, please request

that specifications to be separately delivered.

Application circuit diagrams and circuit constants contained herein are shown as examples of standard

use and operation. Please pay careful attention to the peripheral conditions when designing circuits

and deciding upon circuit constants in the set.

Any data, including, but not limited to application circuit diagrams information, described herein

are intended only as illustrations of such devices and not as the specifications for such devices. ROHM

CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any

third party's intellectual property rights or other proprietary rights, and further, assumes no liability of

whatsoever nature in the event of any such infringement, or arising from or connected with or related

to the use of such devices.

Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or

otherwise dispose of the same, no express or implied right or license to practice or commercially

exploit any intellectual property rights or other proprietary rights owned or controlled by

ROHM CO., LTD. is granted to any such buyer.

Products listed in this document are no antiradiation design.

The products listed in this document are designed to be used with ordinary electronic equipment or devices

(such as audio visual equipment, office-automation equipment, communications devices, electrical

appliances and electronic toys).

Should you intend to use these products with equipment or devices which require an extremely high level

of reliability and the malfunction of which would directly endanger human life (such as medical

instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers

and other safety devices), please be sure to consult with our sales representative in advance.

It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance

of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow

for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in

order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM

cannot be held responsible for any damages arising from the use of the products under conditions out of the

range of the specifications or due to non-compliance with the NOTES specified in this catalog.

Thank you for your accessing to ROHM product informations.

More detail product informations and catalogs are available, please contact your nearest sales office.

THE AMERICAS / EUROPE / ASIA / JAPAN

ROHM Customer Support System

www.rohm.com

TEL : +81-75-311-2121

FAX : +81-75-315-0172

21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan

Appendix1-Rev2.0

相关型号：

UMH5TL

Small Signal Bipolar Transistor, 0.03A I(C), 50V V(BR)CEO, 2-Element, NPN, Silicon, MINIMOLD, UM6, 6 PIN