RS-150 [RSG]

150W Single Output Switching Power Supply; 150W单路输出开关电源
RS-150
型号: RS-150
厂家: RSG ELECTRONIC COMPONENTS GMBH    RSG ELECTRONIC COMPONENTS GMBH
描述:

150W Single Output Switching Power Supply
150W单路输出开关电源

光电 开关 远程控制 输出元件
文件: 总2页 (文件大小:171K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany  
RSG  
Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de  
ELECTRONIC COMPONENTS  
Änderungen vorbehalten / subject to change without notice  
150W Single Output Switching Power Supply  
RS-150 series  
Features :  
Universal AC input / Full range  
Protections:Short circuit/Over load/Over voltage  
Cooling by free air convection  
LED indicator for power on  
100% full load burn-in test  
High realibility  
SPECIFICATION  
MODEL  
RS-150-3.3  
RS-150-5  
RS-150-12  
RS-150-15  
RS-150-24  
RS-150-48  
DC VOLTAGE  
3.3V  
5V  
12V  
15V  
24V  
48V  
RATED CURRENT  
CURRENT RANGE  
RATED POWER  
30A  
26A  
12.5A  
10A  
6.5A  
3.3A  
0 ~ 30A  
99W  
0 ~ 26A  
130W  
80mVp-p  
4.75 ~ 5.5V  
2.0%  
0 ~ 12.5A  
150W  
0 ~ 10A  
150W  
0 ~ 6.5A  
156W  
0 ~ 3.3A  
158.4W  
200mVp-p  
45.6 ~ 52.8V  
1.0%  
RIPPLE & NOISE (max.) Note.2 80mVp-p  
VOLTAGE ADJ. RANGE  
VOLTAGE TOLERANCE Note.3 3.0%  
120mVp-p  
11.4 ~ 13.2V  
1.0%  
120mVp-p  
14.25 ~ 16.5V  
1.0%  
120mVp-p  
22.8 ~ 26.4V  
1.0%  
OUTPUT  
3.2V ~ 3.5V  
LINE REGULATION  
LOAD REGULATION  
Note.4  
Note.5  
0.5%  
2.0%  
0.5%  
0.5%  
0.5%  
0.5%  
0.5%  
1.0%  
0.5%  
0.5%  
0.5%  
0.5%  
SETUP, RISE, HOLD TIME  
VOLTAGE RANGE  
800ms, 20ms, 20ms/230VAC  
88 ~ 132VAC / 176 ~ 264VAC selected by switch  
47 ~ 63Hz  
1200ms, 30ms, 10ms/115VAC at full load  
248 ~ 373VDC(300VAC peak 5sec. No damage)  
FREQUENCY RANGE  
EFFICIENCY(Typ.)  
75%  
78%  
83%  
84%  
86%  
87%  
INPUT  
AC CURRENT  
3A/115VAC  
2A/230VAC  
INRUSH CURRENT(max.)  
COLD START 50A/230VAC  
<2mA / 240VAC  
LEAKAGE CURRENT  
110 ~ 150% rated output power  
OVER LOAD  
Protection type : Hiccup mode, recovers automatically after fault condition is removed  
3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V  
PROTECTION  
27.6 ~ 32.4V  
55.2 ~ 64.8V  
OVER VOLTAGE  
Protection type : Hiccup mode, recovers automatically after fault condition is removed  
-20 ~ +70 (Refer to output load derating curve)  
20 ~ 90% RH non-condensing  
WORKING TEMP.  
WORKING HUMIDITY  
-20 ~ +85 , 10 ~ 95% RH  
ENVIRONMENT STORAGE TEMP., HUMIDITY  
TEMP. COEFFICIENT  
0.03%/ (0 ~ 50  
)
VIBRATION  
10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes  
UL60950-1, TUV EN60950-1 Approved  
SAFETY STANDARDS  
WITHSTAND VOLTAGE  
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC  
ISOLATION RESISTANCE  
EMI CONDUCTION & RADIATION  
HARMONIC CURRENT  
SAFETY &  
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC  
Compliance to EN55022 (CISPR22) Class B  
Compliance to EN61000-3-2,-3  
EMC  
(Note 6)  
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2) heavy industry level, criteria A  
EMS IMMUNITY  
MTBF  
244KHrs min. MIL-HDBK-217F (25  
199*98*38mm (L*W*H)  
)
OTHERS  
NOTE  
DIMENSION  
PACKING  
0.7Kg; 20pcs/14Kg/0.72CUFT  
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.  
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.  
3. Tolerance : includes set up tolerance, line regulation and load regulation.  
4. Line regulation is measured from low line to high line at rated load.  
5. Load regulation is measured from 0% to 100% rated load.  
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets  
EMC directives.  
7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.  
File Name:RS-150-SPEC 2004-03-25  
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany  
RSG  
Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de  
ELECTRONIC COMPONENTS  
Änderungen vorbehalten / subject to change without notice  
150W Single Output Switching Power Supply  
RS-150 series  
Mechanical Specification  
Case No. 902 Unit:mm  
197  
1
2
3
4
5
6
7
57.5  
120  
4.5  
199  
190  
6.5  
157  
22  
Terminal Pin. No Assignment  
Pin No. Assignment Pin No.  
Assignment  
1
2
3
AC/L  
AC/N  
FG  
4,5  
6,7  
DC OUTPUT -V  
DC OUTPUT +V  
Output Derating  
Static Characteristics  
Ta=25  
100  
90  
100  
80  
80  
70  
60  
40  
60  
50  
40  
20  
(VERTICAL)  
70  
(HORIZONTAL)  
-20  
-20  
0
0
10  
20  
30  
40  
50  
60  
88  
176  
95  
190  
100  
200  
115  
230  
120  
240  
132  
264  
AMBIENT TEMPERATURE (  
)
INPUT VOLTAGE (VAC) 60Hz  
File Name:RS-150-SPEC 2004-03-25  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY