BARA-01SPP-10-11-0200 [SAMTEC]
Cable Assembly;
| 型号： | BARA-01SPP-10-11-0200 |
| 厂家： | 
SAMTEC |
| 描述： | Cable Assembly |
| 文件： | 总6页 (文件大小：967K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
BARA-XXXXX-XX-XX-XXXX
REVISION B
THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
Pb
OVERALL CABLE LENGTH (MILLIMETERS)
0100-9999 [3.9 - 393.7]
DO NOT
SCALE FROM
THIS PRINT
END 2 CONNECTOR
(SEE NOTE 9 & 10)
-01BJ: SMA-J-C-X-ST-BS5 (SEE SHEET 3)
-01SP: SMA-P-C-X-ST-CS5 (SEE SHEET 3)
-SCC4: PRB4-P-C-X-ST-CS5(SEE SHEET 3)
-00SJ: SMP-J-C-XX-ST-CS5 (SEE SHEET 3)
-00RJ: SMP-J-C-XX-RA-CS5 (SEE SHEET 3)
PHASE MATCHED PAIRS
-11
(SEE SHEET 2, TABLE 3)
-92SJ: 292XX-J-C-XX-ST-CS5 (SEE SHEET 4)
-92SP: 292XX-P-C-XX-ST-CS5 (SEE SHEET 4)
***
***
PHASE MATCHING SPEC
-02: 2.0 PICO-SECOND
-05: 5.0 PICO-SECONDS
-10: 10.0 PICO-SECONDS
END 2 PLATING OPTION
1: GOLD ALL COMPONENTS
6. ALTERNATE H GOLD / H GOLD / NICKEL
7. ALTERNATE GOLD MEDIUM/ GOLD FLASH
8. ALTERNATE HEAVY GOLD/MEDIUM GOLD
9. ALTERNATE HEAVY GOLD/MEDIUM GOLD
P: HEAVY GOLD / PASSIVATED STAINLESS STEEL
(SEE SHEET 2 AND 3 FOR PLATING SPECIFICS)
PATENT NUMBER
7,544,093
***=NOT RELEASED
LENGTH: XXXX
(SEE TABLE 1, SHEET 2 FOR TOLERANCE)
C3-B, I-GR
C
10
2.86 .113 REF
1
05
1.59 .063 REF
(SEE NOTE 2) 2
14
19
01
3.30 .130 REF
16.08 .633
REF
04
22
16.51 .650
REF
3
44.50±5.00 1.752±.197
5.61 .221 REF
(SEE NOTE 8) 4
17.99 .708 REF
25.40±10.00 1.000±.394
CABLE ASSEMBLIES NOT
SHOWN FOR CLARITY
FIG 1
BARA-00SJ-XX-XX-XXXX SHOWN
NOTES:
1. C REPRESENTS A CRITICAL DIMENSION
2. USE DRAWING No. BE25S-XXXXX-XX.X-XX-XXXX FOR CABLE ASSEMBLY INSTRUCTIONS
3. PARTS TO BE PROCESSED PER SAMTEC WORKMANSHIP GUIDELINES.
4. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED.
5. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 300V.
6. NOTE DELETED.
7. FOR SUB-ASSEMBLY AND FINISHED GOOD PACKAGING REQUIREMENTS, REFERENCE
SAMTEC PACKAGING STANDARD, LOCK WASHERS AND NUTS TO BE SHIPPED UNASSEMBLED.
8. PRINT CABLE POSITION AND "PAT" (3 LINES FOR POSITION, 1 LINE FOR "PAT")
AND APPLY TO CABLES (TAG STYLE) AS SHOWN.
9. CABLE STOCKED IN INCHES, 1 INCH = 25.4 MILLIMETERS.
10. CABLE LENGTHS LONGER THAN 1000 MILLIMETERS ARE NOT SUPPORTED BY S.I. TEST DATA.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
C1-D-ET
C2-D-ET
C
C
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
X.X: 0.3 [.01]
5
520 PARK EAST BLVD, NEW ALBANY, IN 47150
X.XX: 0.13 [.005]
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
X.XXX: 0.051 [.0020]
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
BULLSEYE 22 POSITION ASSEMBLY
DWG. NO.
BARA-XXXXX-XX-XX-XXXX
SHEET 1 OF 6
02/11/2014
BY: ALVIN W
F:\DWG\MISC\MKTG\BARA-XXXXX-XX-XX-XXXX-MKT.SLDDRW
REVISION B
PATENT NUMBER
7,544,093
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
BULLSEYE 22 POSITION ASSEMBLY
DWGB. ARA-XXXXX-XX-XX-XXXX
NO.
F:\DWG\MISC\MKTG\BARA-XXXXX-XX-XX-XXXX-MKT.SLDDRW
BY:
ALVIN W 02/11/2014 SHEET 2 OF 6
REVISION B
PATENT NUMBER
7,544,093
-01SP
-01BJ
-SCC4
(STRAIGHT PLUG)
(STRAIGHT BULKHEAD JACK)
(ROUND TIP/STD. FERRULE)
(USE DRAWING No. SMA-P-C-X-ST-CS5
FOR ASSEMBLY INSTRUCTIONS)
(USE DRAWING No. SMA-J-C-X-ST-BS5
FOR ASSEMBLY INSTRUCTIONS)
(SEE NOTE 7)
(USE DRAWING No. PRB4-P-C-X-ST-CS5
FOR ASSEMBLY INSTRUCTIONS)
PLATING
1: 30μ" MIN. GOLD CENTER CONTACT
PLATING
PLATING
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-J-C-H-ST-BS5)
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-P-C-H-ST-CS5)
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: PRB4-P-C-H-ST-CS5)
NOTE: ALL CRITICAL DIMENSIONS ON SMA-J-C-X-ST-BS5
NOTE: ALL CRITICAL DIMENSIONS ON SMA-P-C-X-ST-CS5
NOTE: ALL CRITICAL DIMENSIONS ON PRB4-P-C-X-ST-CS5
THAT APPLY MUST BE VERIFIED.
THAT APPLY MUST BE VERIFIED.
THAT APPLY MUST BE VERIFIED.
-00SJ
-00RJ
(STRAIGHT JACK)
(RIGHT ANGLE JACK)
(USE DRAWING No. SMP-J-C-XX-ST-CS5
FOR ASSEMBLY INSTRUCTIONS)
(USE DRAWING No. SMP-J-C-XX-RA-CS5
FOR ASSEMBLY INSTRUCTIONS)
PLATING OPTIONS
PLATING OPTIONS
7: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: SMP-J-C-GF-ST-CS5)
7: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: SMP-J-C-GF-RA-CS5)
8: 30μ" MIN. GOLD CENTER CONTACT
10μ" MIN. GOLD OUTER CONTACT
8: 30μ" MIN. GOLD CENTER CONTACT
10μ" MIN. GOLD OUTER CONTACT
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMP-J-C-HG-ST-CS5)
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMP-J-C-HG-RA-CS5)
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
BULLSEYE 22 POSITION ASSEMBLY
NOTE: ALL CRITICAL DIMENSIONS ON SMP-J-C-XX-ST-CS5
NOTE: ALL CRITICAL DIMENSIONS ON SMP-J-C-XX-RA-CS5
DWG. NO.
THAT APPLY MUST BE VERIFIED.
THAT APPLY MUST BE VERIFIED.
BARA-XXXXX-XX-XX-XXXX
SHEET SCALE: 1:1
BY: ALVIN W
02/11/2014 SHEET 3 OF 6
F:\DWG\MISC\MKTG\BARA-XXXXX-XX-XX-XXXX-MKT.SLDDRW
REVISION B
PATENT NUMBER
7,544,093
***-92SJ
***-92SP
(STRAIGHT JACK)
(STRAIGHT PLUG)
(USE DRAWING No. 292XX-J-C-XX-ST-CS5
FOR ASSEMBLY INSTRUCTIONS)
(USE DRAWING No. 292XX-P-C-XX-ST-CS5
FOR ASSEMBLY INSTRUCTIONS)
PLATING OPTIONS
PLATING OPTIONS
6: 30μ" MIN. GOLD CENTER CONTACT
30μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PB-J-C-HH-ST-CS5)
6: 30μ" MIN. GOLD CENTER CONTACT
30μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PB-P-C-HH-ST-CS5)
9: 30μ" MIN. GOLD CENTER CONTACT
10μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PB-J-C-HG-ST-CS5)
9: 30μ" MIN. GOLD CENTER CONTACT
10μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PB-P-C-HG-ST-CS5)
P: 30μ" MIN. GOLD CENTER CONTACT
P: 30μ" MIN. GOLD CENTER CONTACT
PASSIVATED STAINLESS STEEL OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PS-J-C-HP-ST-CS5)
PASSIVATED STAINLESS STEEL OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PS-P-C-HP-ST-CS5)
NOTE: ALL CRITICAL DIMENSIONS ON 292XX-J-C-XX-ST-CS5
NOTE: ALL CRITICAL DIMENSIONS ON 292XX-P-C-XX-ST-CS5
THAT APPLY MUST BE VERIFIED.
THAT APPLY MUST BE VERIFIED.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
BULLSEYE 22 POSITION ASSEMBLY
DWG. NO.
BARA-XXXXX-XX-XX-XXXX
SHEET SCALE: 1:1
BY: ALVIN W
02/11/2014 SHEET 4 OF 6
F:\DWG\MISC\MKTG\BARA-XXXXX-XX-XX-XXXX-MKT.SLDDRW
REVISION B
PATENT NUMBER
7,544,093
INSERTION TOOL
LOCKING FERRULE
KEYS (2)
COMPRESSION SPRING
LOCKING COVER
KEYWAYS
DETAIL 'C'
SCALE 5 : 1
GROUND FERRULE
(INSERTION TOOL) 8
DETAIL 'B''
SCALE 5 : 1
BE25S CABLE ASSEMBLY
CABLE INSTALLATION PROCEDURE:
INSURE LOCKING FERRULE KEYS (SEE DETAIL A) ALIGN WITH KEYWAY
FEATURES IN THE CONNECTOR BODY (SEE DETAIL B). PUSH DOWN
ON THE LOCKING FERRULE (WITH MINIMAL FORCE) USING THE INSERTION
T9O0∶O-9L5.∶TSWTIOSTP TAHNEDINRSEELRETAIOSNE. TTOHOE LLOCCLOKICN GKWFEISRER(UITLSEHWOIULLLDLITFUTRINN TFORETEHLEY)
'B''
TORQUE TO 0.5 IN/LBS
(PRIOR TO CABLES INSTALLED)
2PLCS
LOCK CHAMBER, LOCATED INSIDE THE CONNECTOR BODY, BY WAY OF
THE COMPRESSION SPRING. REPEAT THIS PROCESS WITH REMAINING
CABLE ASSEMBLIES .
REVERSE ABOVE PROCEDURE TO DISASSEMBLE.
1
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
'C'
TARGET PCB (NOT SUPPLIED)
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
DO NOT SCALE DRAWING
BULLSEYE 22 POSITION ASSEMBLY
DWG. NO.
BARA-XXXXX-XX-XX-XXXX
FIG 3
SHEET SCALE: 1:1
APPLICATION VIEW
BY: ALVIN W
02/11/2014 SHEET 5 OF 6
F:\DWG\MISC\MKTG\BARA-XXXXX-XX-XX-XXXX-MKT.SLDDRW
REVISION B
PATENT NUMBER
7,544,093
PACKAGING VIEW
ENDS OF CABLE ASSEMBLY TO BE WRAPPED
IN ANTI-STATIC BUBBLE WRAP
6
7
BAR-GKT-022
(A COMPONENT FROM ITEM 1/BAR-J-22)
8 (INSERTION/REMOVAL TOOL)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
EMAIL: INFO@SAMTEC.COM
DO NOT SCALE DRAWING
DESCRIPTION:
BULLSEYE 22 POSITION ASSEMBLY
DWG. NO.
BARA-XXXXX-XX-XX-XXXX
ALVIN W 02/11/2014 SHEET 6 OF 6
SHEET SCALE: 2:1
BY:
F:\DWG\MISC\MKTG\BARA-XXXXX-XX-XX-XXXX-MKT.SLDDRW
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明