BE25M-01BJ1-02.0-08-0152 [SAMTEC]

Cable Assembly;


型号：	BE25M-01BJ1-02.0-08-0152
厂家：	SAMTEC
描述：	Cable Assembly
文件：	总2页 (文件大小：489K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DESIGNED & DIMENSIONED

IN MILLIMETERS[INCHES]

BE25M-XXXXX-XX.X-XX-XXXX

REVISION E

THIS PRODUCT MANUFACTURED

WITH LEAD-FREE PROCESSING

CABLE CALLOUT END 1

OVERALL CABLE LENGTH (MILLIMETERS)

(SEE NOTES 8 & 9)

DO NOT

SCALE FROM

THIS PRINT

25M: CCA-25M CABLE WITH

FIG 2

0100-9999 [3.9 - 393.7]

(STOCKED LENGTHS AS FOLLOWS)

-0152: (6 INCHES)

PRB3-P-C-X-ST-CA5 CONNECTOR

(SEE SHEET 2).

CABLE STRIPPING DIMENSIONS

PER CONFIGURATIONS

(SEE TABLE 1)(SEE NOTES 10, 11,12,13)

-0305: (12 INCHES)

END 2 CONNECTOR

(SEE NOTE 15)

-01BJ: SMA-J-C-X-ST-BH5 (SEE SHEET 2)

-01SP: SMA-P-C-X-ST-CA5 (SEE SHEET 2)

-SCC3: PRB3-P-C-X-ST-CA5 (STD. FERRULE)(SEE SHEET 2)

-00SJ: SMP-J-C-XX-ST-CA5 (SEE SHEET 2)

-00RJ: SMP-J-C-XX-RA-CA5 (SEE SHEET 2)

-0457: (18 INCHES)

-0914: (36 INCHES)

"A" mm

"B" mm

"C" mm

No. OF PHASE MATCHED CABLES

-01: NO PHASE MATCHING (1 CABLE

FOR THIS PART NUMBER)

-02: (2 CABLES FOR THIS PART NUMBER)

-04: (4 CABLES FOR THIS PART NUMBER)

-06: (6 CABLES FOR THIS PART NUMBER)

-08: (8 CABLES FOR THIS PART NUMBER)

END 2 PLATING OPTION

1: GOLD ALL COMPONENTS

7. ALTERNATE GOLD MEDIUM/ GOLD FLASH

8. ALTERNATE HEAVY GOLD/MEDIUM GOLD

(SEE SHEET 2 FOR PLATING SPECIFICS)

"D" mm

"E" mm

PHASE MATCHING SPEC

-00.0: NO PHASE MATCHING

* -02.0: 2.0 PICO-SECOND

** -05.0: 5.0 PICO-SECONDS

-10.0: 10.0 PICO-SECONDS

(SEE NOTE 14)

* NOT AVAILABLE WITH -0457 AND -0914 CABLE LENGTH

**NOT AVAILABLE WITH -0914 CABLE LENGTH

PATENT NUMBER

7,544,093

END 1

END 2

25M: PRB3-P-C-H-ST-CA5

(VARIABLE, SEE PART CALLOUT)

LENGTH: XXXX

(SEE TABLE 2 FOR TOLERANCE)

NOTES:

(SEE NOTE 2 FOR CABLE CUT LENGTH)

REPRESENTS A CRITICAL DIMENSION

2. CABLE CUT LENGTH:

= (LENGTH: XXXX) - (SUBTRACTOR FOR END 1) - (SUBTRACTOR FOR END 2)

(SEE TABLE 1 FOR SUBTRACTORS)

FIG 1

3. ASSEMBLY TO BE 100% TESTED FOR OPENS & SHORTS

BE25M-01SPX-00.0-00-XXXX SHOWN

4. ASSEMBLY TO BE 100% HI-POT TESTED PER TABLE 1

5. AFTER FINAL ELECTRICAL TESTS, LABEL EACH CABLE ASSEMBLY WITH 1 LABEL -ET

6. CRITICALS ON CONNECTOR PRINTS TO BE CHECKED IN PROCESS.

7. FINISHED ASSEMBLIES TO BE PACKAGED IN OPAQUE BAGS. LOCK WASHERS AND NUTS TO

BE SHIPPED UNASSEMBLED. GASKETS TO BE INSTALLED ON CABLE.

8. CABLE STOCKED IN INCHES, 1 INCH = 25.4 MILLIMETERS

9. CABLE LENGTHS LONGER THAN 1000 MILLIMETERS ARE NOT SUPPORTED BY S.I. TEST DATA

10. PRODUCTION OF STRIP AND TIN FOR CENTER DIELECTIC USE: A

11. PRODUCTION OF STRIP AND TIN FOR SHIELD USE: D=A+B

F:\DWG\MISC\MKTG\BE25M-XXXXX-XX.X-XX-XXXX-MKT.SLDDRW

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

12. PRODUCTION OF STRIP AND TIN FOR JACKET USE: E=A+B+C

13. DIM "A", "B", AND "C" HAVE A MINIMUM VALUE OF 0.0mm & A MAXIMUM VALUE OF 9.9mm.

14. PARTS TO BE PHASE MATCHED PER CO-HD-WI-3062-M.

MILLIMETERS [INCHES].

TOLERANCES ARE:

DECIMALS

ANGLES

15. FERRULE AND SPRING ARE FREE FLOATING AND ARE NOT STATIONARY.

.X: 0.3 [.01]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail: info@SAMTEC.com code: 55322

.XX: 0.13 [.005]

.XXX: 0.051 [.0020]

MATERIAL:

SHEET SCALE: 2:1

DO NOT SCALE DRAWING

DESCRIPTION:

SEE END 1 AND END 2 ASSEMBLY PRINTS

BULLSEYE 25X CABLE ASSEMBLY

DWG. NO.

BE25M-XXXXX-XX.X-XX-XXXX

01/07/2010

TALON Z

SHEET 1 OF

BY:

相关型号：