CLP-102-02-SM-D-BE [SAMTEC]

Board Connector, 20 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Black Insulator;


型号：	CLP-102-02-SM-D-BE
厂家：	SAMTEC
描述：	Board Connector, 20 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Black Insulator PC 连接器
文件：	总3页 (文件大小：280K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CLP-1XX-XX-XXX-D-XX

REVISION CQ

1. C REPRESENTS A CRITICAL DIMENSION

2. MINIMUM PUSHOUT FORCE: .5LB (8 OZ)

3. ONE POSITON WILL BE LOST FOR EVERY CUT MADE ON A

SOCKET STRIP

4. TUBE PACKAGE POSITIONS 5-50 ONLY. POSITIONS 2-4 ARE

TO BE LAYERED PACKAGED.

No OF POSITIONS PER ROW

OPTION

-02 THRU -50

-P: PICK & PLACE PAD (USE LMP-01)

(AVAILABLE ON POSITON -05 THRU -50 ONLY)

(NOT AVAILABLE WITH -PA OR -K OPTIONS)

(SEE FIG 3, SHT 2)

5. SHEAR TAILS TO DIMENSIONS SHOWN

LEAD STYLE SPEC

DO NOT

SCALE FROM

THIS PRINT

6. PARTS TO BE SYMMETRICAL ABOUT

WITHIN ±.0015[0.038].

-A: ALIGNMENT PIN (USE CLP-XX-D-XX)

(NOT AVAILABLE WITH -PA OPTION)

(SEE FIG 3, SHT 2)

-02: SURFACE MOUNT

(USE C-106-X2-XXX)

(SEE NOTE 9)

7. ENDWALL AFTER CUTTING: .0185[0.470]±.0025[0.064]

8. VOID CORES MAY NOT BE PRESENT.

-TR: TAPE AND REEL

9. HAND FILL USE C-106-01-XX.

-BE: BOTTOM ENTRY ONLY (USE CLP-XX-DBE-XX)

-PA: PICK & PLACE PAD WITH ALIGNMENT PINS

(NOT AVAILABLE WITH -P, -A, OR -K OPTIONS)

(SEE SHT 2, TABLE 3)

AUTOMATION USE C-106-22-XX. C-106-02-XX CAN BE

SUBBED FOR C-106-22-XX.

^C10. MAX CUT FLASH: .010[0.27] WITH NO FLASH ALLOWED IN

HOLES OR EXTENDING BELOW LEADS.

.0100 0.254

-K: POLYIMIDE FILM PAD (AVAILABLE ON -05 THRU -50

POSITIONS. USE K-DOT-.157-.250-.005, (SEE FIG 5, SHT 2)

(NOT AVAILABLE WITH -P OR -PA OPTIONS)

.005 0.12

^C11. MAX BURR: .005[.13].

BODY SPEC

-D: DOUBLE ROW

(USE CLP-XX-D)

PLATING SPEC

DETAIL 'D'

-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA

MATTE TIN ON TAIL

SCALE 16 : 1

-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA

MATTE TIN ON TAIL

No OF POS x .0500[1.270]) - .0500[1.270]

(TOLERANCE ACCUM ±.0020[0.051])

-S: 30µ" SELECTIVE GOLD IN CONTACT AREA

MATTE TIN ON TAIL

-G: 10µ" GOLD IN CONTACT AREA

3µ ON TAIL

.034 0.85

REF

(No OF POS X .0500[1.270]) + .017[0.43]±.008[0.20]

(SEE NOTE 3 AND 7)

-H: 30µ" HEAVY GOLD IN CONTACT AREA

3µ" ON TAIL

-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA

MATTE TIN ON TAIL

'D'

-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA

MATTE TIN ON TAIL

.120 3.05

REF

-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA

MATTE TIN ON TAIL

-LTL: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA

TIN/LEAD (90/10+/-5%) TAIL

-D

-D-BE

CLP-XX-DBE-XX

CLP-XX-D-XX

.050 1.27 REF

+.003

-.001

+0.08

2.29

-0.03

.090

"A"

"B"

(MEASURE AT BEND)

.084 2.12 REF

-A-

.004[[0.10] POS. 02-35

.006[0.15] POS. 36-50

"B"

C C

"A"

SECTION "B"-"B"

-D

-D-BE

.170±.010 4.31±0.25

-3

(-D-BE BODY: CLP-XX-DBE-XX)

(DIFFERENT AS SHOWN,

OTHERWISE SAME AS -D BODY)

.016 0.41 x .005[0.13] REF

SECTION "A"-"A"

(-D BODY: CLP-XX-D-XX)

2.5 MAX SWAY

(TYP)

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

C-106-22-XXX

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

.010 0.25

.012 0.30

88°

REF

90°

DECIMALS

ANGLES

.XX: .01 [.3]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

.XXX: .005 [.13]

.XXXX: .0020 [.051]

SHEET SCALE: 3:1

MATERIAL:

DO NOT SCALE DRAWING

-D-BE

-D

LOW PROFILE .050 x .050 DOUBLE ROW ASM

DWG. NO.

INSULATOR: LCP, UL 94 VO, COLOR: BLACK

CONTACT: PHOS BRONZE

IN-PROCESS

SCALE 8:1

CLP-1XX-XX-XXX-D-XX

FIG 1

BY:

PURVIS

01/31/1994 SHEET 1 OF 3

F:\DWG\MISC\MKTG\CLP-1XX-XX-XXX-D-XX-MKT.SLDDRW

AVAILABLE ON POSITIONS 05 THRU 50 ONLY

NOTE: "N" = USED MEASURED DIMENSION (REF)

"Q" = [("N" - .250[6.35])/2] ±.020[0.51]

REVISION CQ

"N" (SEE NOTE)

"Q" 3.45

(SEE NOTE)

.100 2.54

.005 X 45° REF (TYP 4 SIDES)

.019 0.47

(No OF POS x .0500[1.270]) - .100[2.54] 22.86

LMP-01

.250 6.35 REF

FIG 3

.0070 0.178

REF (TYP)

FIG 2

-A: ALIGNMENT PIN

-P: PICK AND PLACE PAD

.025 0.6350 REF (TYP)

.0100 0.254 REF (TYP)

(AVAILABLE ON POSITION 05 THRU 50 ONLY)

(NOT AVAILABLE WITH -PA OR -K OPTIONS)

(3 POSITION MINIMUM)

(NOT AVAILABLE WITH -PA OPTION)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

.0050 0.127 REF (TYP)

.121 3.07

"A"

.051 1.30

"R"

(SEE NOTE)

.019±.015 0.48±0.38

.035 0.89 REF

.325 8.26

REF

.095 2.41

.1575±.0050 4.000±0.127

"S"

.275 6.99

(SEE NOTE)

PPP-38-X-X-XX

"T"

FIG 5

FIG 4

-K: POLYIMIDE FILM PAD

-PA: PICK & PLACE PAD WITH ALIGNMENT PINS

(NOT AVAILABLE WITH -P, -A OR -K OPTIONS)

(AVAILABLE ON POSITION 05 THRU 50 ONLY)

(NOT AVAILABLE WITH -P OR -PA OPTIONS)

NOTE: "R" = USED MEASURED DIMENSION (REF)

"S" = {("R" - .1575[4.000])/2} ±.020[0.51]

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 4:1

LOW PROFILE .050 x .050 DOUBLE ROW ASM

DWG. NO.

CLP-1XX-XX-XXX-D-XX

F:\DWG\MISC\MKTG\CLP-1XX-XX-XXX-D-XX-MKT.SLDDRW

BY:

PURVIS

01/31/1994 SHEET 2 OF 3

REVISION CQ

PACKAGING

(SEE NOTE 4, SHEET 1)

PT-CLP001-PA

PT-CLX-002-D

PT-CLX-001-D

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 4:1

LOW PROFILE .050 x .050 DOUBLE ROW ASM

DWG. NO.

CLP-1XX-XX-XXX-D-XX

F:\DWG\MISC\MKTG\CLP-1XX-XX-XXX-D-XX-MKT.SLDDRW

BY:

PURVIS

01/31/1994 SHEET 3 OF 3

相关型号：