FSI-135-06-L-S [SAMTEC]

SINGLE PART CARD EDGE CONN;


型号：	FSI-135-06-L-S
厂家：	SAMTEC
描述：	SINGLE PART CARD EDGE CONN
文件：	总6页 (文件大小：651K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

FSI-1XX-XX-X-S-X-XX-XX

REVISION E

DESIGNED & DIMENSIONED

IN MILLIMETERS[INCHES]

No OF POSITIONS

OPTION

THREADED: -10, -20, -30, -40, -50

NON-THREADED: -05 THRU -50

[IN MULTIPLES OF 5]

-XX: BLANK FOR TUBED PARTS.

-TR: TAPE & REEL PACKAGING.

-WT: WELD TAB (SEE FIG 2)

(USE WT-54-01-X)

DO NOT

SCALE FROM

THIS PRINT

"A" REF

POSITION #1

INDICATOR

1.10 .043

REF

BODY HEIGHT

(FOR -06 & -10 HEIGHT OPTIONS)

(NOT AVAILABLE WITH THREADED

INSERT OPTION)

-03: 3mm (USE C-133-01-XXX)

-06: 6mm (USE C-133-02-XXX)

-10: 10mm (USE C-133-03-XXX)

-K: POLYIMIDE FILM PAD

(USE K-DOT-.256-.375-.005)

(AVAILABLE ONLY ON POSITIONS

40 & 50 WITH ANY THREADED

INSERT OPTIONS)

3.00 .118

PLATING SPECIFICATION

REF

4.60 .181

REF

5.30 .209

REF

-L: 10µ" MIN Au/50µ" Ni

IN CONTACT, TIN ON TAIL

(-06 & -10 BODY HEIGHT ONLY)

-S: 30µ" MIN Au/50µ" Ni

ALIGNMENT PIN LOCATION

-AT: TOP SIDE (USE FSI-XX-XX-S-AT-X)

-AB: BOTTOM SIDE (USE FSI-XX-XX-S-AB-X)

-AD: DUAL (TOP & BOTTOM)

IN CONTACT, TIN ON TAIL

(-06 & -10 BODY HEIGHT ONLY)

-G: 10µ" MIN Au/50µ" Ni IN CONTACT,

3µ" MIN Au/50µ" Ni ON TAIL

(-03 BODY HEIGHT ONLY)

1.32 .052

REF

(USE FSI-XX-XX-S-AD-X,)

1.32 .052

REF

(BLANK FOR NO ALIGNMENT PIN)

0.36 .014 REF (TYP)

-H: 30µ" MIN Au/50µ" Ni IN CONTACT,

3µ" MIN Au/50µ" Ni ON TAIL

(-03 BODY HEIGHT ONLY)

THREADED INSERT OPTION

-XX: BLANK FOR NON-THREADED INSERT

-E: THREADED INSERT

1.00 .039 (TYP)

(TOL. NON-ACCUM.)

C-133-01-XXX

(SEE TABLE 6, SHT 3)

"B"±0.10[.004]

ROW SPECIFICATION

-S: SINGLE ROW

-M: THREADED INSERT

(SEE TABLE 6, SHT 3)

0.54 .021

MAX SWAY

1.35 .053

0.87 .034

"A"

-AT LOCATION

1.60 .063

REF (TYP)

FSI-XX-03-S-AD

-AD LOCATION

"D"

SEE TABLE 2

1.25 .049 REF

-AB LOCATION

0.15 .006

REF

"A"

0.56 .022

"C" REF

NOTES:

SECTION "A"-"A"

SCALE 6 : 1

REPRESENTS A CRITICAL DIMENSION.

FIG 1

2. MINIMUM PUSHOUT FORCE: 8 oz.

3. LOAD INSERTS IN THE DIRECTION OF THE ARROW USING THERMAL INSERTION.

(FSI-105-03-X-S-AD-TR SHOWN)

THREADED INSERT BODY HEIGHT: -03 TO BE FLUSH TO 0.13[.005] BELOW HOUSING SURFACE.

BODY HEIGHT: -06 AND -10 TO BE FLUSH TO 0.90[.035] BELOW HOUSING SURFACE.

4. THREADED INSERT OPTION WITH -03 BODY HEIGHT MUST BE ABLE TO HANDLE 20 in-oz's OF TORQUE

MIN WITHOUT ROTATING OR "LOOSENING", WITH -06 & -10 BODY HEIGHT MUST BE ABLE TO HANDLE

54 in-oz's OF TORQUE MIN WITHOUT ROTATING OR "LOOSENING".

5. MINIMUM THREADED INSERT RETENTION: -03 BODY HEIGHT: 7 lbS, -06 & -10 BODY HEIGHT: 50 lbs.

6. NOTE DELETED.

7. HEAT STAKE FORM WILL PRODUCE RETENTION FLANGE AS SHOWN, GAP TO BE 0.25[.010] MAX AFTER ASSEMBLY.

ONLY FOR -06 & -10 BODY HEIGHT.

8. NOT RECOMMENDED FOR INVERTED REFLOW SOLDER.

9. FOR QUANTITIES UP TO 49 PCS, NO LEADER, TRAILER OR REEL WILL BE SUPPLIED, FOR QUANTITIES OF 50-124 PCS.

NO LEADER OR TRAILER WILL BE SUPPLIED.

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN MILLIMETERS. THIS DOCUMENT CONTAINS INFORMATION

TOLERANCES ARE:

PROPRIETARY NOTE

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

DECIMALS

ANGLES

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

X.X: 0.3 [.01]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

X.XX: 0.13 [.005]

X.XXX: 0.051 [.0020]

MATERIAL:

SHEET SCALE: 1:0.2

DO NOT SCALE DRAWING

INSULATOR: LCP COLOR:BLACK.

CONTACT: BeCu

INSERT: BRASS

1mm SINGLE ELEMENT INTERFACE

DWG. NO.

FSI-1XX-XX-X-S-X-XX-XX

BY:

ROY LUO 06/14/2010 SHEET 1 OF 6

F:\DWG\MISC\MKTG\FSI-1XX-XX-X-S-X-XX-XX-MKT.SLDDRW

REVISION E

"K" REF

"M"

C-133-03-XXX

FSI-XX-10-S-X

1.40 .055

WT-54-01-X

2.50 .098

2.25 .089 REF

FIG 2

-WT OPTIONS

(FSI-105-10-X-S-AD-WT SHOWN)

(SAME AS FIG 1, EXCEPT AS SHOWN)

(FOR -06 & -10 HEIGHT ONLY)

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

(NOT AVAILABLE WITH THREADED INSERT OPTION)

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 5:1

1mm SINGLE ELEMENT INTERFACE

DWG. NO.

FSI-1XX-XX-X-S-X-XX-XX

F:\DWG\MISC\MKTG\FSI-1XX-XX-X-S-X-XX-XX-MKT.SLDDRW

BY:

ROY LUO 06/14/2010 SHEET 2 OF 6

REVISION E

"E"

"F"

SEE TABLE 6

"G" REF

"B"

"H"±0.10[.004]

6.00 .236

REF

LOAD INSERT

FROM BOTTOM

(SEE NOTE 3)

FSI-XX-03-S-X-AD

C-133-01-XXX

SECTION "B"-"B"

SCALE 6 : 1

"B"

FIG 3

-M & -E THREADED OPTIONS

(FSI-110-03-X-S-X-AD-TR SHOWN)

(SAME AS FIG 1, EXCEPT AS SHOWN)

(FOR -10, -20 & -30 POS ONLY)

"E"

"F"

7.50 .295

"H"±0.10[.004]

"G" REF

FIG 4

-M & -E THREADED OPTIONS

(FSI-150-03-X-S-X-AD-K SHOWN)

(SAME AS FIG 3, EXCEPT AS SHOWN)

(FOR -40 & -50 POS ONLY)

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 5:1

1mm SINGLE ELEMENT INTERFACE

DWG. NO.

FSI-1XX-XX-X-S-X-XX-XX

F:\DWG\MISC\MKTG\FSI-1XX-XX-X-S-X-XX-XX-MKT.SLDDRW

BY:

ROY LUO 06/14/2010 SHEET 3 OF 6

LOAD INSERT

FROM TOP

(SEE NOTE 3)

REVISION E

SEE TABLE 6

0.25 .010

MAX

"E'

SEE NOTE 7

DETAIL 'C'

SCALE 10 : 1

FSI-XX-06-S-X

C-133-02-XXX

SECTION "E'-"E'

SCALE 6 : 1

"F"

1.20 .047

1.35 .053

REF

(SEE NOTE 7)

"F"

0.30 .012 REF

(SEE NOTE 7)

'C'

FIG 5

(FSI-110-06-X-S-X-TR SHOWN)

(SAME AS FIG 3, EXCEPT AS SHOWN)

(FOR -10, -20 & -30 POS ONLY)

SECTION "F"-"F"

SCALE 4 : 1

"E"

SEE TABLE 6

0.25 .010

"U"±0.25[.010]

"U" = ("E" - 6.50[.256]) / 2

6.50 .256

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

"L"

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

FIG 6

DO NOT SCALE DRAWING

SHEET SCALE: 1:0.2

1mm SINGLE ELEMENT INTERFACE

(FSI-150-10-X-S-X-K SHOWN)

DWG. NO.

(SAME AS FIG 5, EXCEPT AS SHOWN)

(FOR -40 & -50 POS ONLY)

FSI-1XX-XX-X-S-X-XX-XX

F:\DWG\MISC\MKTG\FSI-1XX-XX-X-S-X-XX-XX-MKT.SLDDRW

BY:

ROY LUO 06/14/2010 SHEET 4 OF 6

REVISION E

+0°

-3°

90°

"J"±0.05

+2°

-1°

90°

3.80±0.05 .150±.002

IN-PROCESS 2

(FROM(2) CONTACT C-133-XX-X)

(FOR -06, -10 BODY HEIGHT)

IN-PROCESS 1

(FROM(1) CONTACT C-133-XX-X)

(FOR -06, -10 BODY HEIGHT)

PT-FSI004-10-S-AX

PT-FSI003-06-S-AX

PT-FSI002-03-S-AX

PT-1-24-04-36

PACKAGING VIEW

FSI-1XX-03-X-S-XX

PACKAGING VIEW

FSI-1XX-03-X-S-E-XX-K

FSI-1XX-03-X-S-M-XX-K

PACKAGING VIEW

FSI-1XX-03-X-S-E-XX

FSI-1XX-03-X-S-M-XX

PACKAGING VIEW

FSI-1XX-06-X-S-XX

FSI-1XX-10-X-S-XX

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733

e-Mail info@SAMTEC.com

DESCRIPTION:

FAX: 812-948-5047

code 55322

DO NOT SCALE DRAWING

SHEET SCALE: 6:1

1mm SINGLE ELEMENT INTERFACE

DWG. NO.

FSI-1XX-XX-X-S-X-XX-XX

F:\DWG\MISC\MKTG\FSI-1XX-XX-X-S-X-XX-XX-MKT.SLDDRW

BY:

ROY LUO 06/14/2010 SHEET 5 OF 6

REVISION E

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 1:0.2

1mm SINGLE ELEMENT INTERFACE

DWG. NO.

FSI-1XX-XX-X-S-X-XX-XX

ROY LUO 06/14/2010 SHEET 6 OF 6

F:\DWG\MISC\MKTG\FSI-1XX-XX-X-S-X-XX-XX-MKT.SLDDRW

BY:

相关型号：