FTS-104-03-H-D [SAMTEC]

Board Connector, 8 Contact(s), 2 Row(s), Male, Straight, Solder Terminal,;


型号：	FTS-104-03-H-D
厂家：	SAMTEC
描述：	Board Connector, 8 Contact(s), 2 Row(s), Male, Straight, Solder Terminal,
文件：	总4页 (文件大小：300K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

REVISION CB

FTS-1XX-XX-XX-XX-XX

OPTIONS

No OF POSITIONS

-P: PICK AND PLACE PAD (USE PPP-25)

(AVAILABLE ON POSITIONS 04 THRU 50)

(SEE FIG 5, SHT 2 & FIG 7, SHT 3)

DO NOT

SCALE FROM

THIS PRINT

-02 THRU -50 (UNSHROUDED)

-06 THRU -46 (SHROUDED)

(No OF POS x .0500[1.27]) ±.010[0.25]

.050 1.27 REF

LEAD STYLE

SEE TABLE 1

(USE PPP-25-NT FOR TAPE & REEL)

-TR: TAPE & REEL PACKAGING (SEE FIG 10, SHT 4)

(SEE NOTE 14 & 16)

PLATING SPECIFICATION

(ONLY AVAILABLE WITH -DV OPTION)

-S: END SHROUDS (SEE FIG 3, SHT 2 & FIG 6 SHT 3)

(LEAD STYLE -02 & -03 ONLY)

-L: 10µ" GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

(05 POS MINIMUM, 46 POS MAXIMUM)

(NOT AVAILABLE WITH -A OPTION; ORDER -SA FOR

ALIGNMENT PIN WITH SHROUD)

-F: 3µ" GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

.135 3.43

REF

-S: 30µ" GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

(SEE NOTES 6 & 7)

-SA: END SHROUDS W/ ALIGNMENT PINS

(SEE FIG 4, SHT 2 & FIG 8, SHT 3)

-H: 30µ" GOLD IN CONTACT AREA,

3µ" GOLD ON TAIL

(LEAD STYLE -02 & -03 ONLY)

FTS-XX-DV-XX

-SM: 30µ" GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

(05 POS MINIMUM, 46 POS MAXIMUM)

(SEE NOTES 6 & 7)

-LM: 10µ" GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

-A: MOLDED ALIGMENT PIN (USE FTS-XX-DV-XX)

(ONLY AVAILABLE IN -DV OPTION, 5 POS MINIMUM)

(SEE FIG 9, SHT 3)

-FM: 3µ" GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

(No OF POS x .0500[1.270])

- .0500[1.270]

(NOT AVAILABLE WITH -S OPTION; ORDER -SA FOR

ALIGNMENT PIN AND SHROUD)

-G: 10µ" GOLD IN CONTACT AREA,

3µ" GOLD ON TAIL

.016 0.41 SQ

REF (TYP)

TAIL OPTION

-D: DOUBLE ROW THROUGH HOLE

-DV: DOUBLE ROW VERTICAL SURFACE MOUNT

MAX SWAY

(EITHER DIRECTION)

.050±.004 1.27±0.10

(EITHER DIRECTION)

"A"

(SEE NOTE 15)

.070 1.78 REF

(CONTACT AREA)

(SEE NOTE 5)

.090±.010 2.29±0.25

(SEE NOTE 3)

NOTES:

REPRESENTS A CRITICAL DIMENSION.

2. PARTS MAY BE CUT TO POSITION.

3. SHEAR TAILS TO DIMENSION SHOWN.

.034 0.86

REF

T-1SXX-XX-X

(SEE TABLE 1)

4. MEASURED AT BEND RADIUS, NOT AT END OF PIN.

5. GOLD PLATING TO BE ON POST, TIN PLATING TO BE ON TAIL.

6. 4 POSITIONS PER ROW WILL BE COVERED BY SHROUDS.

(2 POSITIONS PER ROW ON EACH END).

(SEE NOTE 13)

MAX SWAY

(EITHER DIRECTION)

7. 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ALLOW

FOR SHROUDS, EXAMPLE FTS-125-02-L-D-SA REQUIRES A

29 POSITION BODY.

FIG 1

(No OF POS x .0500[1.270]) - .0500[1.270]

FTS-1XX-01-XX-D SHOWN

8. NOTE DELETED.

9. MINIMUM PUSHOUT FORCE: .5 LB (8 OZ)

10. MAXIMUM CUT FLASH: .015[0.38]

11. PPP-25-NT MUST BE USED FOR ALL TAPE AND REEL PACKAGING.

12. FILL BODY SO THAT THE LEAD IN OF THE CORE IS ON THE TAILS SIDE.

13. MAXIMUM BURR ALLOWANCE: .003[0.08]

14. POSITIONS -05 THRU -50 TO BE TUBED. POSITIONS -02 THRU -04 ON

TAIL OPTION -D TO BE LAYER PACKAGED. POSITIONS -02 THRU -04

ON TAIL OPTION -DV TO BE TAPE AND REELED.

15. MAX HEIGHT VARIATION BETWEEN ROWS: .005[0.13].

16. FOR QUANTITIES LESS THAN 125 PIECES, NO REEL WILL BE SUPPLIED.

MAY SUBSTITUTE ASP-61746-05-X

FOR RETENTION PURPOSES FOR -DV STYLE ONLY

.050±.006 1.27±0.15

90°±3°

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

"B"

+.005

.050

1.27^+0.13

0.00

-.000

(SEE NOTE 4)

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DECIMALS

ANGLES

.XX: .01 [.3]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

.004[0.10

.XXX: .005 [.13]

.XXXX: .0020 [.051]

"B"

.230±.010 5.84±0.25

(SEE NOTE 3)

SHEET SCALE: 4:1

MATERIAL:

DO NOT SCALE DRAWING

DESCRIPTION:

.050 X .050 C.L. LOW PROFILE

TERMINAL STRIP ASSEMBLY

INSULATOR: LCP, UL 94 V0, COLOR: BLACK

TERMINAL: PHOS BRONZE

DWG. NO.

FIG 2

SEE NOTE 12

SEE NOTE 13

FTS-1XX-XX-XX-XX-XX

BRATCHER 11/29/1993 SHEET 1 OF 4

FTS-1XX-03-XX-DV SHOWN

SECTION "B"-"B"

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

BY:

F:\DWG\MISC\MKTG\FTS-1XX-XX-XX-XX-XX-MKT.SLDDRW

REVISION CB

(No OF POS x .050[1.27]) + .034[0.86]

(No OF POS x .050[1.27]) + .325[8.26] REF

.137 3.48 REF

.137 3.48

REF

(No OF POS x .050[1.27]) + .200[5.08] REF

(No OF POS x .050[1.27]) + .034[0.86]

.185 4.70

REF

.200 5.08

REF

FES

.185 4.70

REF

.2625 6.668

REF

.115 2.92

REF

FES-A

.115 2.92

REF

.140 3.56

FIG 3

.140 3.56

-DV-S OPTION (SEE NOTES 6 & 7)

FTS-110-02-XX-DV-S SHOWN

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

NOTE: 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ACHIEVE DIMS

(NOT AVAILABLE WITH -A OPTION; ORDER -SA FOR ALIGNMENT PIN WITH SHROUD)

.050 1.27 REF

(No OF POS x .050[1.27]) + .275[6.99]]

.055 1.40 REF

{[(No OF POS x .050[1.27]) - .200[5.08]] / 2} ±.020[0.51]

.20 5.1

REF

.23 5.8

REF

"B"

REF

.130 3.30

PPP-25-NT

FIG 4

(USE PPP-25-NT FOR TAPE AND REEL PACKAGING ONLY)

-DV-SA OPTION (SEE NOTES 6 & 7)

FTS-106-02-XX-DV-SA SHOWN

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

NOTE: 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ACHIEVE DIMS

{[(No OF POS x .050[1.27]) - .200[5.08]] / 2} ±.020[0.51]

.20 5.1

REF

.130 3.30 REF

PPP-25

F:\DWG\MISC\MKTG\FTS-1XX-XX-XX-XX-XX-MKT.SLDDRW

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

"B"

REF

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

.050 X .050 C.L. LOW PROFILE

TERMINAL STRIP ASSEMBLY

DO NOT SCALE DRAWING

SHEET SCALE: 4:1

FIG 5

DWG. NO.

-DV-P OPTION

FTS-1XX-XX-XX-XX-XX

BRATCHER 11/29/1993 SHEET 2 OF 4

FTS-110-02-XX-DV-P SHOWN

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

BY:

REVISION CB

(No OF POS x .050[1.27]) + .034[0.86]

(No OF POS x .050[1.27]) + .325[8.26] REF

.137 3.48 REF

.137 3.48

REF

(No OF POS x .050[1.27]) + .200[5.08] REF

(No OF POS x .050[1.27]) + .034[0.86]

.185 4.70

.200 5.08

REF

FES

.185 4.70

REF

.2625 6.668

REF

.115 2.92

REF

.115 2.92

REF

FES-A

.124 3.15

FIG 6

-D-S OPTION (SEE NOTES 6 & 7)

FTS-110-02-XX-D-S SHOWN

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

NOTE: 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ACHIEVE DIMS

(NOT AVAILABLE WITH -A OPTION; ORDER -SA FOR ALIGNMENT PIN WITH SHROUD)

.050 1.27 REF

(No OF POS x .050[1.27]) + .275[6.99]]

.071 1.80 REF

{[(No OF POS x .050[1.27]) - .200[5.08]] / 2} ±.020[0.51]

.20 5.1

REF

.13 3.3

REF

FIG 8

-D-SA OPTION (SEE NOTES 6 & 7)

FTS-110-02-XX-D-SA SHOWN

FIG 7

-D-P OPTION

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

NOTE: 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ACHIEVE DIMS

"B" REF

(SEE TABLE 3, SHT 2)

FTS-110-02-XX-D-P SHOWN

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

FTS-XX-DV-XX

F:\DWG\MISC\MKTG\FTS-1XX-XX-XX-XX-XX-MKT.SLDDRW

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

.050 1.27 REF

.035 0.89

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

(No OF POS - 2) x .050[1.27]

REF

DESCRIPTION:

.050 X .050 C.L. LOW PROFILE

TERMINAL STRIP ASSEMBLY

DO NOT SCALE DRAWING

SHEET SCALE: 4:1

FIG 9

-A MOLDED ALIGNMENT PIN

FTS-110-02-XX-DV-A SHOWN

(ONLY AVAILABLE IN -DV OPTION)

DWG. NO.

FTS-1XX-XX-XX-XX-XX

BRATCHER 11/29/1993 SHEET 3 OF 4

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

BY:

TUBE PACKAGING VIEW

REVISION CB

POSITION 1

SEE NOTE 11

-01-D, -02-D, -03-D

-D-S(A)-P

-DV-S(A)-P

SEE NOTE 14

"A"

USER DIRECTION OF UNREELING

POCKET NOT DETAILED

-DV

-DV-P

-D-P

-DV-S(A)

-D-S(A)

IN PROCESS VIEWS

(HANDFILL ONLY)

"A" - .034[0.86]

(SEE NOTE 15)

"A" - .034[0.86]

(SEE NOTE 15)

"A" - .034[0.86]

(SEE NOTE 15)

SECTION "A"-"A"

FIG 10

.350 8.89

REF

-TR: TAPE AND REEL PACKAGING WITH PPP-25-NT PAD

NOT AVAILABLE ON THROUGH HOLE LEAD STYLES

.125±.010 3.18±0.25

(SEE NOTE 3)

.050 1.27

IN PROCESS 2

W/O -A PINS

IN PROCESS 1

W/O -A PINS

"A" - .084[2.13]

(SEE NOTE 15)

"A" - .084[2.13]

(SEE NOTE 15)

"A" - .084[2.13]

(SEE NOTE 15)

.175±.010 4.45±0.25

(SEE NOTE 3)

.350 8.89

REF

.100 2.54

IN PROCESS 3

IN PROCESS 2

WITH -A PINS

IN PROCESS 1

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

WITH -A PINS

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

.050 X .050 C.L. LOW PROFILE

TERMINAL STRIP ASSEMBLY

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

DWG. NO.

FTS-1XX-XX-XX-XX-XX

BRATCHER 11/29/1993 SHEET 4 OF 4

BY:

F:\DWG\MISC\MKTG\FTS-1XX-XX-XX-XX-XX-MKT.SLDDRW

相关型号：