FTS-104-04-F-DV-TR [SAMTEC]
Board Connector;
| 型号： | FTS-104-04-F-DV-TR |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector 连接器 |
| 文件： | 总4页 (文件大小：287K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION CF
FTS-1XX-XX-XX-XX-XX
OPTIONS
No OF POSITIONS
-P: PICK AND PLACE PAD (USE PPP-25)
(AVAILABLE ON POSITIONS 04 THRU 50)
(SEE FIG 5, SHT 2 & FIG 7, SHT 3)
DO NOT
SCALE FROM
THIS PRINT
-02 THRU -50 (UNSHROUDED)
-05 THRU -46 (SHROUDED)
(No OF POS x .0500[1.27]) ±.010[0.25]
.050 1.27 REF
LEAD STYLE
SEE TABLE 1
(USE PPP-25-NT FOR TAPE & REEL)
-TR: TAPE & REEL PACKAGING (SEE FIG 10, SHT 4)
(SEE NOTE 14 & 16)
PLATING SPECIFICATION
(ONLY AVAILABLE WITH -DV OPTION)
-S: END SHROUDS (SEE FIG 3, SHT 2 & FIG 6 SHT 3)
(LEAD STYLE -02 & -03 ONLY)
02
50
-L: 10µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(05 POS MINIMUM, 46 POS MAXIMUM)
(NOT AVAILABLE WITH -A OPTION; ORDER -SA FOR
ALIGNMENT PIN WITH SHROUD)
-F: 3µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.135 3.43
REF
C
L
-S: 30µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(SEE NOTES 6 & 7)
-SA: END SHROUDS W/ ALIGNMENT PINS
(SEE FIG 4, SHT 2 & FIG 8, SHT 3)
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
01
49
(LEAD STYLE -02 & -03 ONLY)
FTS-XX-DV-XX
-SM: 30µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(05 POS MINIMUM, 46 POS MAXIMUM)
(SEE NOTES 6 & 7)
-LM: 10µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-A: MOLDED ALIGMENT PIN (USE FTS-XX-DV-XX)
(ONLY AVAILABLE IN -DV OPTION, 5 POS MINIMUM)
(SEE FIG 9, SHT 3)
-FM: 3µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(No OF POS x .0500[1.270])
- .0500[1.270]
(NOT AVAILABLE WITH -S OPTION; ORDER -SA FOR
ALIGNMENT PIN AND SHROUD)
-G: 10µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
.016 0.41 SQ
REF (TYP)
TAIL OPTION
-D: DOUBLE ROW THROUGH HOLE
-DV: DOUBLE ROW VERTICAL SURFACE MOUNT
2
MAX SWAY
(EITHER DIRECTION)
.050±.004 1.27±0.10
2
MAX SWAY
(EITHER DIRECTION)
"A"
(SEE NOTE 15)
.070 1.78 REF
(CONTACT AREA)
(SEE NOTE 5)
.090±.010 2.29±0.25
(SEE NOTE 3)
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. PARTS MAY BE CUT TO POSITION.
3. SHEAR TAILS TO DIMENSION SHOWN.
.034 0.86
REF
T-1SXX-XX-X
(SEE TABLE 1)
4. MEASURED AT BEND RADIUS, NOT AT END OF PIN.
5. GOLD PLATING TO BE ON POST, TIN PLATING TO BE ON TAIL.
6. 4 POSITIONS PER ROW WILL BE COVERED BY SHROUDS.
(2 POSITIONS PER ROW ON EACH END).
(SEE NOTE 13)
2
MAX SWAY
(EITHER DIRECTION)
7. 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ALLOW
FOR SHROUDS, EXAMPLE FTS-125-02-L-D-SA REQUIRES A
29 POSITION BODY.
FIG 1
(No OF POS x .0500[1.270]) - .0500[1.270]
FTS-1XX-01-XX-D SHOWN
8. NOTE DELETED.
02
01
50
9. MINIMUM PUSHOUT FORCE: .5 LB (8 OZ)
10. MAXIMUM CUT FLASH: .015[0.38]
11. PPP-25-NT MUST BE USED FOR ALL TAPE AND REEL PACKAGING.
12. FILL BODY SO THAT THE LEAD IN OF THE CORE IS ON THE TAILS SIDE
FOR -DV OPTION ONLY.
C
L
13. MAXIMUM BURR ALLOWANCE: .003[0.08]
14. POSITIONS -05 THRU -50 TO BE TUBED. POSITIONS -02 THRU -04 ON
TAIL OPTION -D TO BE LAYER PACKAGED. POSITIONS -02 THRU -04
ON TAIL OPTION -DV TO BE TAPE AND REELED.
15. MAX HEIGHT VARIATION BETWEEN ROWS: .005[0.13].
16. FOR QUANTITIES LESS THAN 125 PIECES, NO REEL WILL BE SUPPLIED.
49
MAY SUBSTITUTE ASP-61746-05-X
FOR RETENTION PURPOSES FOR -DV STYLE ONLY
.050±.006 1.27±0.15
90°±3°
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
"B"
+.005
-.000
.050
1.27+0.13
0.00
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
(SEE NOTE 4)
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.004[0.10
.XXX: .005 [.13]
.XXXX: .0020 [.051]
"B"
.230±.010 5.84±0.25
(SEE NOTE 3)
SHEET SCALE: 4:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
.050 X .050 C.L. LOW PROFILE
TERMINAL STRIP ASSEMBLY
INSULATOR: LCP, UL 94 V0, COLOR: BLACK
TERMINAL: PHOS BRONZE
DWG. NO.
FIG 2
SEE NOTE 12
SEE NOTE 13
FTS-1XX-XX-XX-XX-XX
BRATCHER 11/29/1993 SHEET 1 OF 4
FTS-1XX-03-XX-DV SHOWN
SECTION "B"-"B"
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
BY:
F:\DWG\MISC\MKTG\FTS-1XX-XX-XX-XX-XX-MKT.SLDDRW
REVISION CF
(No OF POS x .050[1.27]) + .034[0.86]
(No OF POS x .050[1.27]) + .325[8.26] REF
C
.137 3.48 REF
L
.137 3.48
REF
(No OF POS x .050[1.27]) + .200[5.08] REF
C
L
(No OF POS x .050[1.27]) + .034[0.86]
.185 4.70
REF
.200 5.08
REF
FES
.185 4.70
REF
.2625 6.668
REF
.115 2.92
REF
FES-A
.115 2.92
REF
.140 3.56
FIG 3
.140 3.56
-DV-S OPTION (SEE NOTES 6 & 7)
FTS-106-02-XX-DV-S SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
NOTE: 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ACHIEVE DIMS
(NOT AVAILABLE WITH -A OPTION; ORDER -SA FOR ALIGNMENT PIN WITH SHROUD)
.050 1.27 REF
(No OF POS x .050[1.27]) + .275[6.99]]
.055 1.40 REF
{[(No OF POS x .050[1.27]) - .200[5.08]] / 2} ±.020[0.51]
.20 5.1
REF
.23 5.8
REF
"B"
REF
.130 3.30
PPP-25-NT
FIG 4
(USE PPP-25-NT FOR TAPE AND REEL PACKAGING ONLY)
-DV-SA OPTION (SEE NOTES 6 & 7)
FTS-106-02-XX-DV-SA SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
NOTE: 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ACHIEVE DIMS
{[(No OF POS x .050[1.27]) - .200[5.08]] / 2} ±.020[0.51]
.20 5.1
REF
.130 3.30 REF
PPP-25
F:\DWG\MISC\MKTG\FTS-1XX-XX-XX-XX-XX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
"B"
REF
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
.050 X .050 C.L. LOW PROFILE
TERMINAL STRIP ASSEMBLY
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
FIG 5
DWG. NO.
-DV-P OPTION
FTS-1XX-XX-XX-XX-XX
BRATCHER 11/29/1993 SHEET 2 OF 4
FTS-110-02-XX-DV-P SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
BY:
REVISION CF
(No OF POS x .050[1.27]) + .034[0.86]
(No OF POS x .050[1.27]) + .325[8.26] REF
C
.137 3.48 REF
L
.137 3.48
REF
(No OF POS x .050[1.27]) + .200[5.08] REF
C
L
(No OF POS x .050[1.27]) + .034[0.86]
.185 4.70
.200 5.08
REF
REF
FES
.185 4.70
REF
.2625 6.668
REF
.115 2.92
REF
.115 2.92
REF
FES-A
.124 3.15
.124 3.15
FIG 6
-D-S OPTION (SEE NOTES 6 & 7)
FTS-106-02-XX-D-S SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
NOTE: 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ACHIEVE DIMS
(NOT AVAILABLE WITH -A OPTION; ORDER -SA FOR ALIGNMENT PIN WITH SHROUD)
.050 1.27 REF
(No OF POS x .050[1.27]) + .275[6.99]]
.071 1.80 REF
{[(No OF POS x .050[1.27]) - .200[5.08]] / 2} ±.020[0.51]
.20 5.1
REF
.13 3.3
REF
FIG 8
-D-SA OPTION (SEE NOTES 6 & 7)
FTS-106-02-XX-D-SA SHOWN
FIG 7
-D-P OPTION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
NOTE: 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ACHIEVE DIMS
"B" REF
(SEE TABLE 3, SHT 2)
FTS-110-02-XX-D-P SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
FTS-XX-DV-XX
F:\DWG\MISC\MKTG\FTS-1XX-XX-XX-XX-XX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
.050 1.27 REF
.035 0.89
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
(No OF POS - 2) x .050[1.27]
REF
REF
DESCRIPTION:
.050 X .050 C.L. LOW PROFILE
TERMINAL STRIP ASSEMBLY
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
FIG 9
-A MOLDED ALIGNMENT PIN
FTS-110-02-XX-DV-A SHOWN
(ONLY AVAILABLE IN -DV OPTION)
DWG. NO.
FTS-1XX-XX-XX-XX-XX
BRATCHER 11/29/1993 SHEET 3 OF 4
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
BY:
TUBE PACKAGING VIEW
REVISION CF
POSITION 1
SEE NOTE 11
-01-D, -02-D, -03-D
-D-S(A)-P
-DV-S(A)-P
SEE NOTE 14
"A"
"A"
USER DIRECTION OF UNREELING
POCKET NOT DETAILED
-DV
-DV-P
-D-P
-DV-S(A)
-D-S(A)
IN PROCESS VIEWS
(HANDFILL ONLY)
"A" - .034[0.86]
(SEE NOTE 15)
"A" - .034[0.86]
(SEE NOTE 15)
"A" - .034[0.86]
(SEE NOTE 15)
SECTION "A"-"A"
FIG 10
.350 8.89
REF
-TR: TAPE AND REEL PACKAGING WITH PPP-25-NT PAD
NOT AVAILABLE ON THROUGH HOLE LEAD STYLES
.125±.010 3.18±0.25
(SEE NOTE 3)
.050 1.27
IN PROCESS 2
IN PROCESS 2
W/O -A PINS
W/O -A PINS
IN PROCESS 1
W/O -A PINS
"A" - .084[2.13]
(SEE NOTE 15)
"A" - .084[2.13]
(SEE NOTE 15)
"A" - .084[2.13]
(SEE NOTE 15)
.175±.010 4.45±0.25
(SEE NOTE 3)
.350 8.89
REF
.100 2.54
IN PROCESS 3
IN PROCESS 2
WITH -A PINS
WITH -A PINS
IN PROCESS 1
PROPRIETARY NOTE
*
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
WITH -A PINS
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
.050 X .050 C.L. LOW PROFILE
TERMINAL STRIP ASSEMBLY
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
DWG. NO.
FTS-1XX-XX-XX-XX-XX
BRATCHER 11/29/1993 SHEET 4 OF 4
BY:
F:\DWG\MISC\MKTG\FTS-1XX-XX-XX-XX-XX-MKT.SLDDRW
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明