HTSW-125-23-H-S [SAMTEC]

Board Connector, 25 Contact(s), 1 Row(s), Male, Straight, Solder Terminal,;


型号：	HTSW-125-23-H-S
厂家：	SAMTEC
描述：	Board Connector, 25 Contact(s), 1 Row(s), Male, Straight, Solder Terminal, PC 连接器
文件：	总7页 (文件大小：394K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

REVISION BO

HTSW-XXX-XX-XXX-X-XX-XX-XX

TERMINAL SPACE SPEC

DO NOT

SCALE FROM

THIS PRINT

OPTION 3

*-MW: METAL WASHER

-1= .100 [2.54] (FILL EVERY POSITION)

-2= .200 [5.08] (FILL EVERY OTHER

POSITION STARTING WITH THE 1st

AND ENDING WITH THE LAST

POSITION IN BODY)

(STRAIGHT TAIL OPTION ONLY)

(AVAILABLE ON 05, 06, 07. 08. 16, 17, 18,

22, 23,24, 25, 41 & 42 LEAD STYLES ONLY)

(N/A WITH -LC OPTION. 20 POS MIN, 30 POS MAX.

SEE FIG 6, SHT 5)

NUMBER OF POSITIONS

-1: -01 THRU -50

OPTION 2

"A"= NUMBER OF POS x .100[2.54]

-2: -02 THRU -25

-POLARIZING SPECIFICATION

XXX INDICATES POS TO BE OMITTED

"A"= (NUMBER OF POS x .200[5.08])-.100[2.54]

LEAD STYLE

OPTION 1

SEE TABLE 1, SHT 6

-BLANK: STRAIGHT (SEE FIG 1, SHT 2)

-RA: RIGHT ANGLE (SEE TABLE 3 & 4, FIG 5, SHT 4)

-RE: EXTENDED RIGHT ANGLE (SEE TABLE 3 & 4, FIG 5, SHT 4)

(SINGLE ROW ONLY)

PLATING SPECIFICATIONS

-G: 10µ" GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL

-T: MATTE TIN CONTACT AND TAIL

-NA: RA OPTION WITH STRAIGHT OPTION BODY (SEE TABLE 3 & 4, FIG 5, SHT 4)

-NE: RE OPTION WITH STRAIGHT OPTION BODY (SEE TABLE 3 & 4, FIG 5, SHT 4)

-LC: LOCKING CLIP (4 POS MINIMUM; ONLY AVAILABLE ON:

LEAD STYLES -08 THRU -13 & -22, WITH ROW OPTIONS -S & -D;

-S: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL

-H: 30µ" HEAVY GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL

-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL

-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL

-E: 50µ" EXTRA HEAVY GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL

(AVAILABLE ON LEAD STYLES -07, -08, -09 STRAIGHT AND -08-D-RA)

-TL: TIN/LEAD (90/10 5%) CONTACT AND TAIL,

N/A WITH -MW, -RA OR -RE OPTIONS; SEE FIG 2, SHT 2)

BO_{-LA: -RA OPTION WITH -LL OPTION (SEE SHT 3)}

-LL: LOCKING LEAD (SEE FIG 4, SHT 3)

(N/A WITH -RE OR -NE OPTIONS)

(N/A IN SINGLE ROW, 1 OR 2 POSITIONS)

(AVAILABLE ONLY ON LEAD STYLES -07, -08 & -09)

-TM: MATTE TIN CONTACT AND TAIL

ROW SPECIFICATION (SEE TABLE 2)

-S: SINGLE

-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL

-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL

-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL

-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA, TIN/LEAD (90/10 5%) TAIL

-LTL: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA, TIN/LEAD (90/10 +/-5%) TAIL,

(AVAILABLE ONLY ON LEAD STYLE -15)

-D: DOUBLE

-T: TRIPLE

-Q: TRIPLE ROW, FILL OUTER ROWS ONLY

-SS: 30µ" STRIPE SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ONTAIL, (SEE NOTE 9)

* - MW OPTION, DO NOT DESIGN IN. SAMTEC WILL

ONLY SUPPORT EXISTING BUSINESS 2/12/02.

CRITICAL DIMENSION INSPECTION INSTRUCTION TABLE

ASSEMBLY OPERATION

IN-PROCESS INSPECTION

FILL

MULTI-CUT

RIGHT ANGLE

CRIMP

NOTES:

CPCs INTENTIONALLY DELETED:

REPRESENTS CRITICAL DIMENSION FOR STATISTICAL PROCESS CONTROL.

2. MINIMUM TERMINAL PUSHOUT FORCE: 3 LBS.

3. MAXIMUM HEIGHT VARIATION: .005[.127] (N/A ON -RA TAIL).

4. ASSEMBLE GOLD PLATE END AS SHOWN IN FIG 1.

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

DECIMALS

ANGLES

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

5. STYLE -26: ROUND END OF PIN TO APPEAR ON BOTTOM (SEE FIG 7, SHT 6).

6. MINIMUM GOLD PLATED CONTACT AREA: .165[4.19] REF; PINS -18, -21 & -25: .050[1.27] REF.

7. CRIMP TWO PINS CLOSEST TO CENTER OF THE PART IF THERE IS A POLARIZED POSITION

IN THE MIDDLE/CENTER.

.XX: .01 [.25]

.XXX: .005 [.13]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

.XXXX: .0020 [.051]

PHONE: 812-944-6733

FAX: 812-948-5047

code 55322

e-Mail info@SAMTEC.com

8. MAXIMUM CUT FLASH: .010 [.25].

SHEET SCALE: 3.5:1

MATERIAL:

DO NOT SCALE DRAWING

DESCRIPTION:

9. -SS PLATING OPTION ONLY AVAILABLE ON -07, -08, -09 STRAIGHT AND -08 -RA LEAD

STYLES. MATES WITH SSQ, SSW, SSM, BCS, ESQ & ESW.

10. MEASURE FROM THE BEND RADIUS OF THE TERMINALS.

11. ORIENTATE PINS TO PREVENT BANDOLIER MARKS FROM SHOWING IN THE POST AREA.

(SEE TABLE 6, SHT 7).

INSULATOR: LCP, UL-94-V-0

COLOR: NATURAL

.025 SQ POST HI-TEMP TERMINAL STRIP ASSEMBLY

DWG. NO.

HTSW-XXX-XX-XXX-X-XX-XX-XX

SHEET 1 OF 7

BY:

PURVIS

02/17/87

F:\DWG\MISC\MKTG\HTSW-XXX-XX-XXX-X-XX-XX-XX-MKT.SLDDRW

REVISION BO

+.005

-.015

+0.127

"A"

-0.381

"A"

(SEE CALLOUT)

TERMINAL SPACING

-1XX= .100[2.54]

-2XX= .200[5.08]

.200 5.08

.100 2.54

MAX SWAY

"C" .008[0.20]

(SEE TABLE 1, SHT 6)

(SEE NOTE 3)

(EITHER DIRECTION)

MAX SWAY

.025 0.64 SQ REF

(EITHER DIRECTION)

.200 5.08

.100 2.54

MINIMUM GOLD PLATED

CONTACT LENGTH

(SEE NOTE 6)

"L" REF

(SEE TABLE 1, SHT 6)

.100 2.54

REF

.198 5.03

.0980 2.489 REF

.298 7.57

REF

.298 7.57

REF

SEE NOTE 5

REF

MAX SWAY

(EITHER DIRECTION)

-S

-D

-T

-Q

FIG 1

HTSW-110-07-XXX-D SHOWN

"G" REF

.596 15.15

REF

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

"F"

DO NOT SCALE DRAWING

SHEET SCALE: 3:1

FIG 2: LOCKING CLIP

.025 SQ POST HI-TEMP TERMINAL STRIP ASSEMBLY

DWG. NO.

HTSW-110-07-XXX-D-LC SHOWN

(DIFFERENT AS SHOWN, OTHERWISE

SAME AS FIG 1)

HTSW-XXX-XX-XXX-X-XX-XX-XX

PURVIS

02/17/87

SHEET 2 OF 7

F:\DWG\MISC\MKTG\HTSW-XXX-XX-XXX-X-XX-XX-XX-MKT.SLDDRW

BY:

FIG 3

REVISION BO

TERMINAL SPACING

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

-S

-D

-T

-Q

-S

-T

-Q

-D

STRAIGHT VERSION

ODD POSITIONS

STRAIGHT VERSION

EVEN POSITIONS

148

150

100

148

150

-Q

(FILL OUTER ROWS ONLY)

-T

-1 = .100 TERMINAL SPACING

-S

-D

-T

-Q

-S

-D

RIGHT ANGLE VERSION

ODD POSITIONS

-S

-D

-T

-Q

(FILL OUTER ROWS ONLY)

-2 = .200[5.08] TERMINAL SPACING

FIG 4

-LL: LOCKING LEAD

(NOTE: END VIEWS SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

-T

-Q

-D

-S

SEE CRIMP DETAIL

RIGHT ANGLE VERSION

EVEN POSITIONS

.017 0.43

BO -LL:LOCKING LEAD

= CRIMP LOCATION

TWO CENTER MOST PINS TO BE CRIMPED AS SHOWN.

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

.04 1.0

(TYP)

.0080 0.203

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

CRIMP DETAIL

SCALE: 2x

[TYP- ALL CRIMPS]

-S

-LC-LL

-D

-LL

-D

-LC-LL

-S

-LL

-T

-LL

DO NOT SCALE DRAWING

SHEET SCALE: 3:1

.025 SQ POST HI-TEMP TERMINAL STRIP ASSEMBLY

NO.

^DWGH^.TSW-XXX-XX-XXX-X-XX-XX-XX

PURVIS

02/17/87

SHEET 3 OF 7

F:\DWG\MISC\MKTG\HTSW-XXX-XX-XXX-X-XX-XX-XX-MKT.SLDDRW

BY:

REVISION BO

PIN #1

PIN #3

MAX SWAY

PIN #2

PIN #1

(EITHER DIRECTION)

MAX SWAY

PIN #1

(EITHER DIRECTION)

PIN #1

PIN #3

90°

(TYP)

90°(TYP)

90° (TYP)

.04 1.0

.06 1.5

'D'

.06 1.5

.100 2.54 (TYP)

(SEE NOTE 10)

.100 2.54 (TYP)

(SEE NOTE 10)

.06 1.5

"E" REF

.120 3.05

REF

.200 5.08 (TYP)

(SEE NOTE 10)

"E" REF

.200 5.08 (TYP)

(SEE NOTE 10)

.240 6.10

REF

SINGLE -RA / -RE

"E" REF

DOUBLE -RA

.320 8.13 REF

TRIPLE -RA

FIG 5

QUAD -RA

-RA: RIGHT ANGLE

(-LA OPTION IS SHOWN ON ALL -RA VIEWS

FOR DIMENSIONAL PURPOSES)

(SEE CRIMP DETAIL VIEW, SHT 3)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

TABLE 3

"D"

-XX

-RA / -NA

-RE / -NE

.06 [1.5]

.16 [4.1]

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 4:1

.025 SQ POST HI-TEMP TERMINAL STRIP ASSEMBLY

DWG. NO.

HTSW-XXX-XX-XXX-X-XX-XX-XX

F:\DWG\MISC\MKTG\HTSW-XXX-XX-XXX-X-XX-XX-XX-MKT.SLDDRW

BY:

PURVIS

02/17/87

SHEET 4 OF 7

REVISION BO

# - MW OPTION, DO NOT DESIGN IN. SAMTEC WILL

ONLY SUPPORT EXISTING BUSINESS 2/12/02.

.003 0.08 MAX

.005 0.13 MAX

ESQ-04-MW-T

-S

-D

FIG 6

*-MW: METAL WASHER

(ONE PER POSITION)

PT-1-24-01-22

PT-1-24-07-51

PT-1-24-08-03

PT-1-24-03-29

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

PT-1-24-01-63

PT-1-24-02-04

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 2.5:1

.025 SQ POST HI-TEMP TERMINAL STRIP ASSEMBLY

DWG. NO.

HTSW-XXX-XX-XXX-X-XX-XX-XX

SHEET 5 OF 7

F:\DWG\MISC\MKTG\HTSW-XXX-XX-XXX-X-XX-XX-XX-MKT.SLDDRW

BY:

PURVIS

02/17/87

REVISION BO

.025 0.64

REF(TYP)

.018 0.46

REF(TYP)

FIG 7

-26 LEAD STYLE

(SAME AS FIG 1, DIFFERENT AS SHOWN)

(1) WITH -RA or -RE OPTION

(5) AVAILABLE IN -LL OPTION.

(2) OMIT WITH -Q ROW SPECIFICATION

(3) NOT AVAILABLE IN -RA OR -RE OPTION.

(4) NOT AVAILABLE IN -RE OPTION.

(6) AVAILABLE IN -LA OPTION.

(7) ON STYLE -08 -RA & -LA

OPTIONS ONLY; 'C' = .230+.005/-.008 [5.84+.13/-.20]

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

*SQUARE END OF PIN(T-1RS7-01-XXX-2)SHOULD BE LOCATED AT "C" DIMENSION DURING FILL PROCESS.

(SEE FIG 7)

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 3.5:1

.025 SQ POST HI-TEMP TERMINAL STRIP ASSEMBLY

DWG. NO.

HTSW-XXX-XX-XXX-X-XX-XX-XX

F:\DWG\MISC\MKTG\HTSW-XXX-XX-XXX-X-XX-XX-XX-MKT.SLDDRW

BY:

PURVIS

02/17/87

SHEET 6 OF 7

REVISION BO

POST AREA

BANDOLIER (REF)

TAIL AREA

IN PROCESS 1

(SAME AS FIG. 1, DIFFERENT AS SHOWN)

-T PLATING ONLY

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 3:1

.025 SQ POST HI-TEMP TERMINAL STRIP ASSEMBLY

DWG. NO.

HTSW-XXX-XX-XXX-X-XX-XX-XX

F:\DWG\MISC\MKTG\HTSW-XXX-XX-XXX-X-XX-XX-XX-MKT.SLDDRW

BY:

PURVIS

02/17/87

SHEET 7 OF 7

HTSW-125-23-H-S [SAMTEC]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E