IPBT-111-H4-TM-D-K [SAMTEC]
Board Connector, 22 Contact(s), Male, Straight, Solder Terminal, Locking, Black Insulator,;
| 型号： | IPBT-111-H4-TM-D-K |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 22 Contact(s), Male, Straight, Solder Terminal, Locking, Black Insulator, |
| 文件： | 总5页 (文件大小：357K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FIG 1
REVISION AC
(IPBT-108-H1-XX-D SHOWN)
IPBT-1XX-XX-XX-D-XX
OPTION
No OF POSITIONS
-02 THRU -15
(No OF POSITIONS x .165[4.19]) + .053[1.33] REF
(No OF POSITIONS - 1) x .165[4.19]
-RA: RIGHT ANGLE (SEE FIG 2, SHEET 2)
[STYLE -H1 ONLY]
.109 2.76 REF
DO NOT
SCALE FROM
THIS PRINT
(PER ROW)
-GP: GUIDE POSTS (USE IPBT-XX-D-GP,
SEE FIG 4, SHEET 3)
-02 (SEE SHEET 5, FIG.8)
(NOT AVAILABLE W/ -K OPTION)
*-K: KEYED POLARIZATION
01
02
LEAD STYLE
(USE IPBT-XX-D-K)(SEE FIG 9, SHEET 5)
(NOT AVAILABLE W/ -GP OPTION)
-H1: HIGH POWER, THRU HOLE
(USE T-1S55-XX-X-2, SEE FIG.1, SHEET 1)
-H2: HIGH POWER, SURFACE MOUNT
(USE T-1S55-02-X-2, SEE FIG.3, SHEET 3)
-H3: HIGH POWER. THRU HOLE, .670" STACKER
(USE T-1S55-05-X-2, SEE FIG.5, SHEET 4)
-H4: HIGH POWER. THRU HOLE, .748" STACKER
(USE T-1S55-06-X-2, SEE FIG.6, SHEET 4)
-H5: HIGH POWER. THRU HOLE, .787" STACKER
(USE T-1S55-07-X-2, SEE FIG.6, SHEET 4)
-H6: HIGH POWER. THRU HOLE, .984" STACKER
(USE T-1S55-08-X-2, SEE FIG.6, SHEET 4)
*(LEAVE BLANK FOR NO KEY OPTION,
SAMTEC WILL ONLY SUPPORT EXISTING
BUSINESS AS OF REV W)
.378 9.60 REF
.050 1.27 REF
.165 4.19
ROW SPECIFICATION
-D: DOUBLE (USE IPBT-XX-D)
09
PLATING SPECIFICATION
C
L
-TM: MATTE TIN CONTACT AND TAIL
(USE T-1S55-XX-T-2)
-T: MATTE TIN CONTACT AND TAIL
(USE T-1S55-XX-T-2)
IPBT-08-D
SEE NOTE 8
.205 5.21 REF
"A"
.424 10.77
REF
.260 6.60
.380 9.65
REF
.405 10.29
REF
REF
.510 12.95
REF
.130 3.30
"A"
.045 1.14 SQ REF
.165 4.19
2
MAX SWAY
T-1S55-01-X-2
2
MAX SWAY
.045 1.14 SQ REF
(TYP)
.165 4.19
(TYP)
SECTION "A"-"A"
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. COPLANARITY (FOR SURFACE MOUNT): SEE TABLE 2 SHEET 3.
3. MAX BURR ALLOWANCE: .0015 [.038]
(No OF POSITIONS - 1) x .165[4.19] ±.008[0.20]
4. MINIMUM TERMINAL RETENTION: 1 LB.
5. IPBT-XX-D-XX AND IPBV-XX-D PARTS TO BE MOLDED TO POSITION,
IPBE-XX-XX-D ARE TO BE CUT.
6. MAX HEIGHT VARIATION BETWEEN PINS: .005 [.13]
7. ALL PIN TO PIN DIMENSIONS TO BE MEASURED FROM TIP TO TIP.
8. THIS NUMBER REPRESENTS THE NUMBER OF POSITIONS PER ROW ONLY
AND IS NOT INTENDED TO BE USED IN POSITION NUMBERING.
9. ALL PARTS TO BE PACKAGED IN TUBES EXCEPT 2 AND 3 POS. 2 AND 3 POS
PARTS TO BE LAYER PACKAGED.
10. MAX CUT FLASH: .005 [.13]
11. AFTER REVISION T OF COMPONENT PRINT IPT1-XX-D-XX-X, SAMTEC LOGO
TO APPEAR ON CORE #1 FOR POSITIONS 1 THROUH 5. FOR POSITIONS 6
THROUGH 15, LOGO TO APPEAR ON CORE #1 AND THE LAST CORE WITHIN THE SAME ROW.
UNLESS OTHERWISE SPECIFIED,
PROPRIETARY NOTE
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
DECIMALS
ANGLES
2
.XX: .01[.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005[.13]
.XXXX: .0020[.051]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
CONSENT OF SAMTEC, INC.
e-Mail info@SAMTEC.com
DESCRIPTION:
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
.165 DOUBLE ROW TERMINAL ASSEMBLY
INSULATOR: LCP UL 94 VO, COLOR: BLACK
TERMINAL: HIGH COPPER ALLOY
DWG. NO.
IPBT-1XX-XX-XX-D-XX
BY:
DEAN P
7/27/2001
SHEET 1 OF 5
F:\DWG\MISC\MKTG\IPBT-1XX-XX-XX-D-XX-MKT.SLDDRW
REVISION AC
-RA: RIGHT ANGLE IN-PROCESS VIEWS
IN-PROCESS 3
IN-PROCESS 2
IN-PROCESS 4
IN-PROCESS 1
LATCH
.260 6.60
REF
.260 6.60
REF
90°
.173 4.38
REF
1.068 27.13
REF
.6861 17.43
REF
.060 1.52
.394 10.00
.1475±.005 3.75±0.13
.688 17.48
.147 3.73 REF
T-1S55-03-X-2
T-1S55-04-X-2
FIG 2
(IPBT-108-H1-XX-D-RA SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(AVAILABLE ONLY ON -H1)
T-1S55-03-X-2
2
MAX SWAY
T-1S55-04-X-2
(EITHER DIRECTION)
01
02
90°
.260 6.60
REF
.217±.008 5.51±0.20
(SEE NOTE 7)
09
.060 1.52
.147 3.73 REF
"B"
SECTION "B"-"B"
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.165 DOUBLE ROW TERMINAL ASSEMBLY
DWG. NO.
IPBT-1XX-XX-XX-D-XX
"B"
F:\DWG\MISC\MKTG\IPBT-1XX-XX-XX-D-XX-MKT.SLDDRW
BY:
DEAN P
7/27/2001
SHEET 2 OF 5
REVISION AC
FIG 3
(IPBT-108-H2-XX-D SHOWN)
-H2: SURFACE MOUNT IN-PROCESS VIEWS
IN-PROCESS 1
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1
2
MAX SWAY
(EITHER DIRECTION)
01
02
.160 4.06
REF
.607 15.42
REF
.327 8.30
09
T-1S55-02-X-2
T-1S55-02-X-2
"C"
+0°
-4°
90°
.260 6.60
REF
.450 11.43
IN-PROCESS 2
SEE NOTE 2
"C"
SECTION "C"-"C"
90°+-04°° (TYP)
T-1S55-02-X-2
.145 3.68
FIG 4
(IPBT-108-H1-XX-D-RA-GP SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1, 2 OR 3)
.620±.010
(No OF POSITIONS x .165[4.19]) +.240[6.10] REF
.160 4.06 REF
01
02
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
.424 10.77
REF
.110 2.79 REF
IPBT-08-D-GP
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
09
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.470588
.165 DOUBLE ROW TERMINAL ASSEMBLY
.135 3.43 REF
DWG. NO.
IPBT-1XX-XX-XX-D-XX
(No OF POSITIONS x .165[4.19]) + .483[12.27] REF
DEAN P
7/27/2001
SHEET 3 OF 5
F:\DWG\MISC\MKTG\IPBT-1XX-XX-XX-D-XX-MKT.SLDDRW
BY:
FIG 5
REVISION AC
(IPBT-108-H3-XX-D SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG.1)
IN PROCESS 1
(FOR H3, H4, H5, & H6 ONLY)
IPBT-08-D
"A"
(SEE TABLE 3)
IPBV-XX-D
.130 3.30
"C" REF
(SEE TABLE 4)
T-1S55-05-X-2
"D"
(SEE TABLE 4)
.130 3.30
FIG 6
(IPBT-108-H6-XX-D SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1)
FIG 7
(IPBT-108-H6-XX-D-GP SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1, 4, 5, OR 6)
IPBT-08-D
"A"
IPBT-08-D-GP
(SEE TABLE 3)
CUT FROM
IPBE-31-H6-D
CUT FROM
IPBE-31-H6-D
T-1S55-08-X-2
T-1S55-08-X-2
PROPRIETARY NOTE
(No. OF POSITIONS x .165[4.19]) + .033[0.84]±.005 REF
(SEE NOTE 11)
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.165 DOUBLE ROW TERMINAL ASSEMBLY
DWG. NO.
IPBT-1XX-XX-XX-D-XX
F:\DWG\MISC\MKTG\IPBT-1XX-XX-XX-D-XX-MKT.SLDDRW
BY:
DEAN P
7/27/2001
SHEET 4 OF 5
REVISION AC
FIG 9
(IPBT-1XX-H1-XX-D-K SHOWN)
FIG 8
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(IPBT-102-H1-XX-D SHOWN)
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1)
-102 POS SHOWN
-105 POS SHOWN
(DIFFERENT AS SHOWN)
(TYPICAL FOR POSITIONS 3 THRU 15)
01
02
01
02
.035 0.89
REF
06
03
IPBT-02-D-K
IPBT-05-D-K
PACKAGING VIEWS
[PARTS TO HAVE POSITION #1 LOADED IN
SAME DIRECTION AS ARROW ON TUBE]
(SEE NOTE 9)
IPBT-1XX-H2-XX-D-XX SHOWN
TUBE: PT-1-24-02-112
PLUG: TP-28
IPBT-1XX-H1-XX-D-XX SHOWN
TUBE: PT-1-24-01-112
PLUG: TP-28
IPBT-1XX-H3-XX-D-XX SHOWN
TUBE: PT-1-24-04-56
PLUG: TP-25
IPBT-1XX-H4-XX-D-XX SHOWN
TUBE: PT-IPBT001-H4-H6
PLUG: TP-28
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
IPBT-1XX-H1-XX-D-RA SHOWN
DESCRIPTION:
TUBE: PT-1-24-19T-109
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.165 DOUBLE ROW TERMINAL ASSEMBLY
PLUG: TP-25 (2 EACH END)
IPBT-1XX-H5-XX-D-XX SHOWN
TUBE: PT-IPBT001-H4-H6
PLUG: TP-28
DWG. NO.
IPBT-1XX-H6-XX-D-XX SHOWN
TUBE: PT-IPBT001-H4-H6
PLUG: TP-28
IPBT-1XX-XX-XX-D-XX
BY:
DEAN P
7/27/2001
SHEET 5 OF 5
F:\DWG\MISC\MKTG\IPBT-1XX-XX-XX-D-XX-MKT.SLDDRW
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明