IPT1-103-01-SM-D-VS-LC-TR [SAMTEC]

Rectangular Power Connector, 6 Contact(s), Male, Surface Mount Terminal;


型号：	IPT1-103-01-SM-D-VS-LC-TR
厂家：	SAMTEC
描述：	Rectangular Power Connector, 6 Contact(s), Male, Surface Mount Terminal
文件：	总2页 (文件大小：234K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

REVISION X

IPT1-1XX-XX-XX-D-VS-XX-XX

No OF POS PER ROW

-02 THRU -25

((No OF POS x .1000 [2.540])

+ .0200[.508]) .010[.25]

OPTION

DO NOT

SCALE FROM

THIS PRINT

-K: POLYIMIDE FILM PAD

[AVAILABLE ON POSITIONS -03 THRU

-25 ONLY]

(No OF POS -1) x .1000 [2.540]

-TR: TAPE AND REEL

LEAD STYLE

-01

OPTION

.060 1.52

-A: ALIGNMENT PIN (USE SM-A11) [4 POS MIN]

-LC: LOCKING CLIP (USE LC-07-TM) [4 POS MIN]

(SEE NOTE 10)

SEE NOTE 8

PLATING SPECIFICATION

-FL: FRICTION LOCK [POS -05 THRU -25]

(USE IPT1-XX-D-FL-X & T-1S64-05-X)

-PL: POSITION #1 REMOVED

(USE IPT1-XX-D-P)

-S: SELECTIVE, 30 Au / 50 Ni MIN

ON CONTACT, MATTE TIN TAIL

.200 5.08

REF

.100 2.54 REF

-SM: SELECTIVE, 30 Au / 50 Ni MIN

ON CONTACT, MATTE TIN TAIL

MATTE TIN ON TAIL

(SEE NOTE 12)

TAIL OPTION

-VS: VERTICAL SURFACE MOUNT

-L: LIGHT SELECTIVE, 10 Au / 50 Ni MIN

ON CONTACT, MATTE TIN TAIL

ROW SPECIFICATION

-D: DOUBLE (USE IPT1-XX-D)

(SEE NOTE 11)

.025 0.64 SQ REF

MAX SWAY

(TYP)

T-1S6-25-X-2

"A"

IPT1-XX-D

+5°

-0°

90°

.155 3.94 REF

(SEE NOTE 6)

.250 6.35

REF

SEE TABLE 1

.050±.010 1.27±0.25

"A"

.295 7.49 MAX

MAX SWAY

(TYP)

SECTION "A"-"A"

NOTES:

REPRESENTS A CRITICAL DIMENSION.

2. MAXIMUM ALLOWABLE CUT FLASH: .010[.25].

3. MINIMUM TERMINALT PUSH OUT FORCE: 2 lbs.

-TR: TAPE & REEL PACKAGING OPTION

4. MAXIMUM VARIATION BETWEEN PIN ROWS: .005[.13].

5. "END WALLS" AFTER CUTTING SHOULD BE .010+/-.003[.25+/-.08].

6. PINS TO BE FLUSH TO .008 [.20] MAXIMUM RECESSED IN BODY.

7. ALL DIMENSIONS TO BE ABOUT CENTERLINE WITHIN +/-.005[.13].

8. PRESENCE OF VOIDS IS OPTIONAL AND PATTERN TO WHICH THEY

OCCUR IS VARIABLE.

POS 1 (TOWARD

ROUND HOLE)

9. NOTE DELETED.

PACKAGING VIEW

10. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION

IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS

MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.

11. STANDARD BODIES CAN BE CUT TO POSITION. FOR -LC, -FL & -PL

OPTIONS, BODIES MUST BE MOLDED TO POSITION.

[-02 POSITION TO BE

BULK PACKAGED]

IN-PROCESS

.368 9.35 REF

12. FOR EXISTING CUSTOMERS ONLY, -POL CAN BE SUBSTITUED FOR -PL.

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

TOLERANCES ARE:

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DECIMALS

ANGLES

.XX: .01[.3]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

.XXX: .005[.13]

.XXXX: .0020[.051]

SHEET SCALE: 2.25:1

MATERIAL:

DO NOT SCALE DRAWING

DESCRIPTION:

USER DIRECTION OF UN-REELING

POCKET NOT DETAILED

.100 DOUBLE ROW SHROUDED TERMINAL ASSEMBLY

INSULATOR: LCP, UL 94 VO, COLOR: BLACK

CONTACT: PHOS BRONZE, 510, 3/4 HARD

DWG. NO.

TUBE: PT-1-24-01-103

PLUG: TP-09

IPT1-1XX-XX-XX-D-VS-XX-XX

.118±.003 3.00±0.08

BY:

DEAN P

11-06-2002 SHEET 1 OF 2

F:\DWG\MISC\MKTG\IPT1-1XX-XX-XX-D-VS-XX-XX-MKT.SLDDRW

REVISION X

-FL: FRICTION LOCK OPTION

IPT1-110-01-X-D-VS-FL SHOWN

-A: ALIGNMENT PIN OPTION

IPT1-110-01-X-D-VS-A SHOWN

IPT1-XX-D-FL-X

.105 2.67

SM-A11

(No OF POS -2) x .1000[2.540]

T-1S64-05-X

.063 1.59 REF

-K: POLYIMIDE FILM PAD OPTION

[AVAILABLE ON POSITIONS -03 THRU -25 ONLY]

-PL: POLARIZED OPTION

IPT1-110-01-X-D-VS-PL SHOWN

"R" REF (SEE NOTE)

"S" (SEE NOTE)

.018±.010 0.46±0.25

IPT1-XX-D-P

.2362±.0050 5.999±0.127

.305 7.75

NOTE: "R" = USE MEASURED DIMENSION

"S" = (("R" - .2362[6.000] / 2) .020[.51]

-LC: LOCKING CLIP OPTION

IPT1-110-01-X-D-VS-LC-FL SHOWN

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

.105 2.67

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

LC-07-TM

.010 0.25 REF

.056 1.42 REF

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

(No OF POS -2) x .1000[2.540]

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 2.25:1

.100 DOUBLE ROW SHROUDED TERMINAL ASSEMBLY

DWG. NO.

IPT1-1XX-XX-XX-D-VS-XX-XX

F:\DWG\MISC\MKTG\IPT1-1XX-XX-XX-D-VS-XX-XX-MKT.SLDDRW

BY:

DEAN P

11-06-2002 SHEET 2 OF 2

相关型号：