MEC1-105-02-LM-D-NP-TR [SAMTEC]
Card Edge Connector;
| 型号： | MEC1-105-02-LM-D-NP-TR |
| 厂家： | 
SAMTEC |
| 描述： | Card Edge Connector 连接器 |
| 文件： | 总2页 (文件大小：320K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MEC1-1XX-XX-XX-D-XX-XX
REVISION AJ
OTHER OPTIONS
(No OF POS -1) x .03937 [1.00]
No OF POSITIONS
-LC: LOCKING CLIP (SEE NOTE 8)
(SEE FIG 2)(USE LC-05-TM)
-A: ALIGNMENT PIN
.109 2.77
REF
05, 08, 10, 20, 30, 40 , 50, 60 & 70
DO NOT
SCALE FROM
THIS PRINT
C
(PER ROW, SEE TABLE 2)
({(No OF POS +2) x .03937 [1.00]}
(MOLDED, SEE FIG 4, SHT 2)
(USE MEC1-XX-X-D-X-A)
.007[.18]
.005[.13]
+ .100 [2.54])
CARD THICKNESS
-K: POLYIMIDE FILM PAD
-02: .062 [1.58] THICK CARD
(SEE FIG 6, SHT 2)(USE K-DOT-.310-.406-.005)
-TR: TAPE & REEL PACKAGING
(N/A IN 70 POSITION)(SEE FIG 5, SHT 2)
.026 0.66 REF
(USE MEC1-XX-S-D-X-X)
16
40
02
FLOW INHIBITORS
AT VENDOR DISCRETION
PLATING SPECIFICATION
POLARIZED OPTION (SEE TABLE 2)
-F: 3µ" FLASH GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.275 6.99
REF
-BLANK: BODY IS POLARIZED
-NP: NO POLARIZATION (-05 THRU -30 ONLY)
(USE MEC1-XX-X-D-N-X)
-L: 10µ" LIGHT GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.072 1.83 REF
15
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
1.5° MAX SWAY
(ANY DIRECTION)
39
ROW SPECIFICATION
-D: DOUBLE ROW
(USE MEC1-XX-X-D-X-X)
01
MEC1-XX-X-D-X-X
-FM: 3µ" FLASH GOLD IN CONATACT AREA,
MATTE ON TIN TAIL
-LM: 10µ" LIGHT IN CONTACT AREA,
MATTE TIN ON TAIL
C
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.050 1.27
FIG 1
(No OF POS +2) x
.03937 [1.00] REF
MEC1-120-02-X-D SHOWN
C
.160 4.07 REF
+.005
-.010
+0.13
0.51
-0.25
SEE NOTE 5
.020
"A"
.320 8.13
REF
C
.350 8.89
REF
90°±3°
+.004
-.002
+0.10
9.04
-0.05
.006 0.15 REF
SEE NOTE 2
.356
"A"
.334 8.49
C-113-02-XX
.030 0.75
.079 2.00
SECTION "A"-"A"
PACKAGING VIEW
40
39
02
01
IN-PROCESS
(FILL STEP)
MEC1-XX-X-D-N-X
FOR -K OPTION
NO -K OPTION
C
TUBE: PT-1-24-01-69
PLUG: TP-07
-NP: NON-POLARIZED OPTION
(AVAILABLE ON -05, -08, -10, -20 & -30 POS. ONLY)
(SHOWN: MEC1-120-02-X-D-NP)
TUBE: PT-1-24-01-70
PLUG: TP-29
+.005
-.000
.535
13.59+0.13
0.00
NOTES:
1. MINIMUM PUSHOUT FORCE: 10 oz.
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
C
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
2. COPLANARITY: POS -05 THRU -26: .004 [.10]
POS -27 THRU -70: .006 [.15]
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
C
3.
REPRESENTS A CRITICAL DIMENSION.
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
4. PACKAGE ALL POSITIONS IN TUBES.
.XXX: .005 [.13]
(WITH -K OPTION, USE PT-1-24-01-70 TUBE & TP-29 TUBE PLUG)
(WITHOUT -K OPTION, USE PT-1-24-01-69 TUBE & TP-07 TUBE PLUG)
5. MAXIMUM CUT FLASH: .010; FLASH NOT TO EXTEND BELOW LEADS.
6. MAXIMUM ALLOWABLE BOW: .002 INCH/INCH AFTER ASSEMBLY.
.XXXX: .0015 [.038]
SHEET SCALE: 1.5:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR:
VECTRA E130i COLOR: BLACK
1mm MINI-EDGE CARD ASSEMBLY
DWMG. EC1-1XX-XX-XX-D-XX-XX
NO.
7. MAXIMUM BURR: .003[.08], BURR DIRECTION TO BE OPPOSITE OF SOLDER PAD AREA
8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION IS NOT
COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT
FOR ALL ASSEMBLIES WITH THE –LC OPTION.
CONTACT:
BeCu 190 HM
SHEET 1 OF 2
BY:
KEVIN B
5/11/2000
F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
REVISION AJ
FIG 5
.059 1.50 (TYP)
-TR: TAPE & REEL PACKAGING VIEW
(NOT DRAWN TO SCALE)
LC-05-TM
.010 0.25 REF
C
.056 1.42 REF (TYP)
POSITION 1
2 MAX SWAY
(EITHER DIRECTION)
C
({(No OF POS +2) x .03937[1.00]}
+ .0490[1.245]) .005[.13]
FIG 2
-LC OPTION
(SHOWN: MEC1-120-02-X-D-LC)
.0625 1.588 REF
MEC1-XX-X-D-X-A
.055 1.40 REF
.035 0.89 REF
(TYP)
({(No OF POS +2) x .03937[1.0000]}
+ .0490[1.245]) REF
FIG 4
.0625 1.59 REF
-A: ALIGNMENT PIN OPTION (MOLDED)
(SHOWN: MEC1-120-02-X-D-A)
.376 9.55 REF
FIG 6
USER DIRECTION OF UNREELING
-K: POLYIMIDE FILM PAD OPTION
(SHOWN: MEC1-120-02-X-D-K)
"M"
"P"
F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
02
16
15
40
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
01
39
DESCRIPTION:
.361 9.17
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
1mm MINI-EDGE CARD ASSEMBLY
DWG. NO.
.310 7.87
MEC1-1XX-XX-XX-D-XX-XX
NOTE: "M" = USED MEASURED DIMENSION (REF)
"P" = {("M" - .310 [7.87]) / 2} .020 [.51]
BY:
KEVIN B
5/11/2000
SHEET 2 OF 2
相关型号：
MEC1-105-02-LM-D-RA1-SL
Card Edge Connector, 10 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,
SAMTEC
MEC1-105-02-LM-D-RA2-SL
Card Edge Connector, 10 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,
SAMTEC
MEC1-105-02-S-D-EM1
Card Edge Connector, 10 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket,
SAMTEC
©2020 ICPDF网 联系我们和版权申明