MMS-127-02-LM-SH-TR [SAMTEC]

Board Connector, 27 Contact(s), 1 Row(s), Female, Right Angle, 0.079 inch Pitch, Surface Mount Terminal, Locking, Black Insulator;


型号：	MMS-127-02-LM-SH-TR
厂家：	SAMTEC
描述：	Board Connector, 27 Contact(s), 1 Row(s), Female, Right Angle, 0.079 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
文件：	总4页 (文件大小：348K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MMS-1XX-02-XXX-XX-XX-XXX

REVISION CI

POLARIZING OPTION

-XXX INDICATES POSITION No

(USE PK-07-N)

No OF POSITIONS

-02 THRU -40

(PER ROW)

DO NOT

SCALE FROM

THIS PRINT

OPTION

LEAD STYLE

-02: SURFACE MOUNT

.0787 2.000 REF

-LC: LOCKING CLIP

(NOT AVAILABLE ON -SV)

(USE LC-06-TM, SEE FIG 1,

PLATING SPECIFICATION

FIG 2 & 3, SHT 2 & NOTES 6 & 7)

-P: PICK & PLACE PAD

-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN TAIL

-SV

(ONLY AVAILABLE ON -SV & -DV, 4 POS MIN)

(-SV: USE PPP-09; -DV: USE PPP-03;

SEE FIG 5, SHT 2)

-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN TAIL

-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN TAIL

-M: METAL PICK & PLACE PAD

(ONLY AVAILABLE ON -DV)

(USE LMP-03, SEE FIG 7, SHT 3)

-A: MOLDED ALIGNMENT PIN

(AVAILABLE ON -DV ONLY)

(USE MMS-XX-D-VXX, SEE FIG 4, SHT 3)

-K: POLYIMIDE FILM PAD

-T: MATTE TIN OVER ENTIRE CONTACT

-LTL: 10µ" SELECTIVE GOLD IN CONTACT AREA,

TIN LEAD (90/10 ±5%) TAIL

.1574 3.998

REF

-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN TAIL

-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN TAIL

(AVAILABLE ONLY ON -SV, 3 POS MIN &

-DV, 4 POS MIN)

(USE K-500-300, SEE FIG 6, SHT 3)

-TR: TAPE & REEL PACKAGING

(SEE FIG 8, SHT 3)

-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN TAIL

-DV-LC

-TM: MATTE TIN OVER ENTIRE CONTACT

-H: 30µ" GOLD IN CONTACT AREA,

3µ" GOLD ON TAIL

ENTRY/ROW SPECIFICATION

-SH: SINGLE ROW, HORIZONTAL ENTRY

-DH: DOUBLE ROW, HORIZONTAL ENTRY

-SV: SINGLE ROW, VERTICAL (TOP) ENTRY

-DV: DOUBLE ROW, VERTICAL (TOP) ENTRY

+.005

-.015

(No. OF POS x .0787[2.000]) + .022[0.56]

(TOL ACCUM)(SEE NOTES 6 & 9)

MMS-40-D

SEE NOTE 11

.048 1.22 (TYP)

MMS-40-S

.048 1.22 (TYP)

+7°

-0°

90°

+7°

-0°

.1750 4.445

REF

90°

+.004

-.002

+0.102

-0.051

+.0040 +0.102

4.496

-.0020 -0.051

.1770

4.496

.1770

(SEE NOTE 8)

.006[0.15]

.055 1.40

LC-06-X

.056 1.42

REF (TYP)

C-63-22-XXX

.010 0.25 REF

-SV

-DV-LC

(No OF POS - 2) x .07874[2.0000])

5.89^+0.13

+.005

-.000

+.005

.232

5.89^+0.13

.232

-.000

0.00

FIG 1

MMS-140-02-XXX-XV-LC SHOWN

NOTES:

C-63-22-XXX

-DV

-SV

REPRESENTS A CRITICAL DIMENSION.

2. MAXIMUM ALLOWABLE SWAY: 2° IN EITHER DIRECTION

3. MAXIMUM BURR ALLOWANCE: .003[0.08]

4. MAXIMUM CUT FLASH: .020[0.51].

IN-PROCESS

5. MINIMUM RETENTION FORCE: SINGLE ROW: .5 LB, DOUBLE ROW: 1 LB

6. CUT BODIES FROM MMS-40-D OR MMS-40-S FOR ALL STYLES EXCEPT -LC.

FOR -LC, USE POSITIONALIZED BODIES. 3 POSITION -DV-LC PARTS WILL HAVE 1 LOCKING CLIP.

7. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION IS

NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL

PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.

PROPRIETARY NOTE

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DECIMALS

ANGLES

.XX: .01 [.3]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

.XXX: .005 [.13]

.XXXX: .0020 [.051]

8. THIS DIMENSION TO BE MEASURED AT BEND.

9. FOR -SV LEAD STYLE, EVEN POSITON CUTS LOSE 2 POSITIONS PER CUT; ODD

POSITION CUTS LOSE 1 POSITION PER CUT.

10. LEAD STYLE -02-SH, POSITIONS 2 THRU 4 TO BE PACKAGED IN BOXES. ALL OTHER ROW

SPECIFICATIONS SHOULD BE TUBED ACCORDING TO TABLE 2, REGARDLESS OF POSITION.

11. PK-07-N TO BE INSERTED FROM THIS SIDE.

SHEET SCALE: 3:1

MATERIAL:

DO NOT SCALE DRAWING

DESCRIPTION:

INSULATOR: VECTRA E130i, COLOR: BLACK

CONTACT: PHOS BRONZE

2mm SURFACE MOUNT BOX CONNECTOR STRIP ASM

DWG. NO.

MMS-1XX-02-XXX-XX-XX-XXX

BRATCHER 04/01/1994 SHEET 1 OF 4

F:\DWG\MISC\MKTG\MMS-1XX-02-XXX-XX-XX-XXX-MKT.SLDDRW

BY:

.175 4.45 REF

REVISION CI

SEE NOTE 11

90°±3°

.055 1.40 (TYP)

MMS-40-S-LC

'A'

.0787 2.000 REF

.006[0.15]

.055 1.40

'B'

.010 0.25

REF (TYP)

FLUSH TO .005 0.13

BELOW BODY

C-63-06-XXX

(No OF POS - 2) x .07874[2.0000])

.056 1.42 REF

LC-06-X

.060 1.52

.061 1.55

.004[0.10]

(TAILS ONLY)

.004[0.10]

(TAILS ONLY)

C-63-06-XXX

DETAIL 'A'

SCALE 12 : 1

DETAIL 'B'

SCALE 12 : 1

FIG 2

IN-PROCESS

MMS-140-02-XXX-SH-LC SHOWN

MMS-40-D-LC

.055 1.40 (TYP)

SEE NOTE 11

90°±5°

.1574 3.998

REF

.006[0.15]

.055 1.40

'D'

FLUSH TO .007 0.18 MAX

BELOW BODY

.010 0.25

REF (TYP)

'C'

C-63-08-XXX

C-63-07-XXX

(No OF POS - 2) x .07874[2.0000])

LC-06-X

.056 1.42 REF

.128 3.25

C-63-07-XXX

.060 1.52

C-63-08-XXX

IN-PROCESS

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

.004[0.10]

(TAILS ONLY)

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

DETAIL 'D'

SCALE 12 : 1

DO NOT SCALE DRAWING

SHEET SCALE: 3:1

2mm SURFACE MOUNT BOX CONNECTOR STRIP ASM

DWG. NO.

.004[0.10]

(TAILS ONLY)

FIG 3

MMS-1XX-02-XXX-XX-XX-XXX

DETAIL 'C'

SCALE 12 : 1

MMS-140-02-XXX-DH-LC SHOWN

F:\DWG\MISC\MKTG\MMS-1XX-02-XXX-XX-XX-XXX-MKT.SLDDRW

BY:

BRATCHER 04/01/1994 SHEET 2 OF 4

MMS-40-D-V40

"R" = USED MEASURED DIMENSION

REVISION CI

"S" = ("R" - .118[3.00]) / 2

*DIM WILL BE .187[4.75] IF POLARIZATION KEY IS UNDER PAD.

.032 0.81

REF

"S"±.020

.019±.010 0.49±0.25

*.182 4.62

K-500-300

(No OF POS - 2) x .07874[2.0000])

.118 3.00

.025 0.64

REF

FIG 4

-A: MOLDED ALIGNMENT PIN

ONLY AVAILABLE ON -DV

"R" REF

-SV-K

(MMS-140-02-XXX-DV-A SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

"L" = (No OF POSITIONS x .07874[2.0000]) + .022[0.56]

"M" = USED MEASURED DIMENSION

"P" = ("M" - .2165[5.50]) / 2

*DIM WILL BE .187[4.75] IF POLARIZATION KEY IS UNDER PAD.

(("L"/2) - .150[3.81])±.020[0.51]

+.006

-.004

+0.152

5.77

-0.102

.227

"P"±.020

.300 7.62

REF

.030±.010 0.75±0.25

*.182 4.62

K-500-300

.150 3.81

REF

.2165±.0050 5.499±0.127

PPP-09

"L" REF

-SV-P

"M" REF

(("L"/2) - .197[5.00])±.020[0.51]

-DV-K

+.006

-.004

+0.152

5.77

-0.102

.227

.394 10.01

REF

FIG 6

-K: POLYIMIDE FILM PAD

ONLY AVAILABLE ON -SV & -DV

(MMS-140-02-XXX-XV-K SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

.225 5.72

REF

"L" = (No OF POSITIONS x .07874[2.0000]) + .022[0.56]

(("L"/2) - .1125[2.858])±.020[0.51]

PPP-03

"L" REF

-DV-P

.225 5.72

REF

.185 4.70

FIG 5

-P: PICK & PLACE PAD

ONLY AVAILABLE ON -SV & -DV

(MMS-140-02-XXX-XV-P SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

LMP-03

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733

e-Mail info@SAMTEC.com

DESCRIPTION:

FAX: 812-948-5047

"L" REF

code 55322

FIG 7

-M: METAL PICK & PLACE PAD

ONLY AVAILABLE ON -DV

DO NOT SCALE DRAWING

SHEET SCALE: 3:1

2mm SURFACE MOUNT BOX CONNECTOR STRIP ASM

DWG. NO.

(MMS-140-02-XXX-DV-M SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

MMS-1XX-02-XXX-XX-XX-XXX

F:\DWG\MISC\MKTG\MMS-1XX-02-XXX-XX-XX-XXX-MKT.SLDDRW

BY:

BRATCHER 04/01/1994 SHEET 3 OF 4

FIG 9

REVISION CI

TUBE PACKAGING OPTIONS

CONTACT ENTRY SIDE

FOR ASSEMBLY

MATING SIDE

OF CONNECTOR

**-SH, -SH-LC

**-SH STYLE SHOWN

**SEE NOTE 10

USER DIRECTION OF UN-REELING

-DH-LC

POCKET NOT DETAILED

-DV (4 POS ONLY)

-DV (NOT 4 POS), -DV-LC, -DV-A

-DV-LC STYLE SHOWN

-SV (NOT -02 THRU -04 POS)

FIG 8

-TR: TAPE & REEL PACKAGING

MMS-110-02-XXX-SH SHOWN FOR ORIENTATION OF -SH & -DH STYLES

(MMS-103-02-X-LC, POS 1 TO FACE ROUND HOLES)

-DV-K, -DV-LC-K, -DV-A-K

-DV-K STYLE SHOWN

-SV -K

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733

e-Mail info@SAMTEC.com

DESCRIPTION:

FAX: 812-948-5047

code 55322

DO NOT SCALE DRAWING

SHEET SCALE: 3:1

2mm SURFACE MOUNT BOX CONNECTOR STRIP ASM

-DV-P, -DV-LC-P, -DV-A-P

DWG. NO.

-DV-P STYLE SHOWN

MMS-1XX-02-XXX-XX-XX-XXX

F:\DWG\MISC\MKTG\MMS-1XX-02-XXX-XX-XX-XXX-MKT.SLDDRW

BY: BRATCHER

04/01/1994 SHEET 4 OF 4

相关型号：