MTMM-115-10-S-D-070 [SAMTEC]

Board Stacking Connector, 30 Contact(s), 2 Row(s), Male, Straight, Solder Terminal, ROHS COMPLIANT;


型号：	MTMM-115-10-S-D-070
厂家：	SAMTEC
描述：	Board Stacking Connector, 30 Contact(s), 2 Row(s), Male, Straight, Solder Terminal, ROHS COMPLIANT
文件：	总2页 (文件大小：406K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

NOTES:

REVISION AG

MTMM-1XX-XX-XX-X-XXX-XX-XXX

REPRESENTS A CRITICAL DIMENSION.

OPTION

2. MAXIMUM ALLOWABLE BOW: 0.005[.13] IN/IN AFTER ASSEMBLY.

3. MAXIMUM PIN ROTATION IN BODY: 2°

4. MINIMUM PUSHOUT FORCE: 1LB

No OF POSITIONS

-01 THRU -50

DO NOT

SCALE FROM

THIS PRINT

POLARIZATION

SPECIFY POS -XXX TO BE OMITTED

5. CUT PARTS WITH METAL WASHERS TOWARDS OPERATOR ALLOWING

FLASH TO BE ON POST AWAY FROM CRITICAL AREA (METAL WASHERS).

6. INSERT PINS SO THAT BANDOLIER MARKS ARE LIMITED IN THE POST

AREA (SEE TABLE 3).

TERMINAL SPEC

LEAD STYLE (SEE TABLE 1)

OPTION

**-MW: METAL WASHER

(-D & -Q BODY SPECS ONLY)

(SEE FIG 4, SHT 2)

PLATING SPECIFICATION

-G: 20µ" SELECTIVE GOLD IN CONTACT AREA,

3µ" SELECTIVE GOLD ON TAIL.

(30 POS PER ROW MAX)

TAIL MUST BE .090[2.29] - .300[7.62]

-T: MATTE TIN ON CONTACT AND TAIL.

-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL.

POST HEIGHT

XXX = "A" (SEE TABLE 1)

(NO OF POS x .0787[2.000]) ^{+.0000[0.000]}

-.0100[0.254]

-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL.

BODY SPECIFICATION

-S: SINGLE (TMM-50-S, SEE FIG 1)

-D: DOUBLE (TMM-50-D, SEE FIG 2, SHT 2)

-Q: QUAD (TMM-50-Q, SEE FIG 3, SHT 2)

-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL.

.0787 2.000 REF

-H: 30µ" SELECTIVE GOLD IN CONTACT AREA,

3µ" SELECTIVE GOLD ON TAIL.

-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL.

-TM: MATTE TIN ON CONTACT AND TAIL.

-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL.

-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL.

.020 0.50 SQ

REF (TYP)

** -MW OPTION, DO NOT DESIGN IN. SAMTEC WILL

ONLY SUPPORT EXISTING BUSINESS 02/08/2002

T-1S13-XX-XX-2

"A"±.005[0.124]

(.0000[0.000] MIN)

"L"

.0590 1.499

REF

TAIL REF

MAX SWAY

(EITHER DIRECTION)

.0787 2.000 REF

FIG 1

-S: SINGLE ROW OPTION

MTMM-1XX-02-XX-S-100 SHOWN

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DECIMALS

.XX: .01 [0.3]

.XXX: .005 [0.13]

ANGLES

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

.XXXX: .0020 [0.051]

SHEET SCALE: 4:1

MATERIAL:

DO NOT SCALE DRAWING

INSULATOR: LCP, UL 94 VO, COLOR: BLACK

TERMINAL: PHOS BRONZE

2MM TERMINAL STRIP ASSEMBLY

DWG. NO.

MTMM-1XX-XX-XX-X-XXX-XX-XXX

F:\DWG\MISC\MKTG\MTMM-1XX-XX-XX-X-XXX-XX-XXX-MKT.SLDDRW

BY:

REIDINGER 12/01/1993 SHEET 1 OF 2

REVISION AG

01 03

01 05

.1550 3.937 REF

.0787 2.000 REF

.3150 8.000 REF

.0787 2.000

REF (TYP)

FIG 2

FIG 3

-D: DOUBLE ROW OPTION

-Q: QUAD ROW OPTION

MTMM-1XX-02-XX-D-100 SHOWN

(SAME AS FIG 1, DIFFERENT AS SHOWN)

MTMM-1XX-02-XX-Q-100 SHOWN

(SAME AS FIG 1, DIFFERENT AS SHOWN)

.090 2.29

'A'

'B'

IN PROCESS 1

SCALE 4:1

.005 0.13

MAX

POST AREA

.090 2.29

SQT-MW

"A" REF

DETAIL 'B'

SCALE 16 : 1

(SEE TABLE 1, SHT 4)

FIG 4

-MW: METAL WASHER OPTION

.075 1.91 REF

IN PROCESS 2

SCALE 4:1

MTMM-1XX-02-XX-X-100-MW SHOWN

(ONE PER POSITION)

(-D &-Q PODY SPEC ONLY, SEE NOTE 5)

(SAME AS FIG 1, DIFFERENT AS SHOWN)

** -MW OPTION, DO NOT DESIGN IN. SAMTEC WILL

ONLY SUPPORT EXISTING BUSINESS 02/08/2002

BANDOLIER REF

TAIL AREA

(-T PLATING ONLY)

(SEE NOTE 6 & TABLE 3)

IN PROCESS 4

+.0080

-.0050

+0.203

1.499

-0.127

.0590

PROPRIETARY NOTE

.0050 0.127 MAX

MEASURE AT TAIL

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

MAX SWAY

520 PARK EAST BLVD, NEW ALBANY, IN 47150

(EITHER DIRECTION)

PHONE: 812-944-6733

FAX: 812-948-5047

e-Mail info@SAMTEC.com

code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 3:1

2MM TERMINAL STRIP ASSEMBLY

IN PROCESS 3

SCALE 4:1

DWG. NO.

REPRESS TO PROPER TAIL DIM

DETAIL 'A'

SCALE 8 : 1

.0050 0.127 MAX

MEASURE AT TAIL

MTMM-1XX-XX-XX-X-XXX-XX-XXX

F:\DWG\MISC\MKTG\MTMM-1XX-XX-XX-X-XXX-XX-XXX-MKT.SLDDRW

BY:

REIDINGER 12/01/1993 SHEET 2 OF 2

相关型号：