PESS-04-10-L-14.17-SR [SAMTEC]

Rectangular Power Connector, 4 Contact(s), Female, Crimp Terminal,;


型号：	PESS-04-10-L-14.17-SR
厂家：	SAMTEC
描述：	Rectangular Power Connector, 4 Contact(s), Female, Crimp Terminal, 连接器
文件：	总2页 (文件大小：242K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DESIGNED & DIMENSIONED

IN MILLIMETERS[INCHES]

REVISION J

PESS-XX-XX-X-XX.XX-XX-XXX

No OF POSITIONS

DO NOT

SCALE FROM

THIS PRINT

-02: 2 POSITIONS

-04: 4 POSITIONS

-06: 6 POSITIONS

-08: 8 POSITIONS

SECOND END OPTION

(ONLY AVAILABLE WITH -DR OPTION)

-NUS: NOTCH UP STRAIGHT

(SEE FIG 2, SHEET 2)

LEAD STYLE

-NDS: NOTCH DOWN STRAIGHT

-10: 10 AWG 600 V (C-310-1012-X)

(SEE FIG 3, SHEET 2)

-12: 12 AWG 600 V (C-310-1012-X)

END OPTION

-SR: SINGLE ENDED

-DR: DOUBLE ENDED

PLATING SPECIFICATION

-L: LIGHT SELECTIVE, 10Au / 50 Ni MIN

ON CONTACT, MATTE TIN CRIMP

-S: SELECTIVE, 30Au / 50 Ni MIN

ON CONTACT, MATTE TIN CRIMP

-T: MATTE TIN, 200 TIN / 50 Ni MIN

ON CONTACT, MATTE TIN CRIMP

FIG 1

(PESS-04-XX-X-XX.XX-SR SHOWN)

XX.XX [X.XXX] 2%

(SEE NOTE 6)

ASSEMBLY LENGTH

06.00[152.4] MINIMUM LENGTH

(SEE NOTE 6)

LTC-28

"C" 0.25[.010]

(SEE TABLE 1)

"B" REF

(SEE TABLE 1

DWC-XX-10-600

24.6 .97 REF

9.50 .374 REF

6.35 .250 (TYP)

12.0 .47 REF

PESS-XX-XX

02 01

30.6 1.21

"A" REF

(SEE TABLE 1)

"D" REF

(SEE TABLE 1)

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN MILLIMETERS. THIS DOCUMENT CONTAINS INFORMATION

TOLERANCES ARE:

PROPRIETARY NOTE

NOTES:

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

REPRESENTS A CRITICAL DIMENSION.

DECIMALS

ANGLES

2. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 1000V

AND ELECTRICALLY TESTED FOR SHORTS AND OPENS.

X.X: 0.3 [.01]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

X.XX: 0.13 [.005]

PHONE: 812-944-6733

e-Mail info@SAMTEC.com

DESCRIPTION:

FAX: 812-948-5047

AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY WITH (1) ET STAMP ON THE BODY.

3. MINIMUM LATCH RETENTION: 4.4 N [1 LB].

X.XXX: 0.051 [.0020]

code 55322

MATERIAL:

SHEET SCALE: 2:1

DO NOT SCALE DRAWING

4. MINIMUM PULL OUT FORCE 22.2N [5 LB].

INSULATOR: NYLON, BLACK

CONTACT: COPPER ALLOY

LATCH: NYLON, BLACK

5. PARTS TO BE LAYER PACKAGED; EACH END TO BE SEALED IN A BUBBLE BAG ASBBLT4X5.5.

6. ALL DIMS SHOWN IN METRIC EXCEPT FOR ASSEMBLY LENGTH ON PART CALL OUT.

7. NOTE DELETED.

PESS CABLE ASSEMBLY

DWG. NO.

WIRE: PVC COATED TINNED COPPER

8. CAP RETENTION: 4.4 N [1LB].

9. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP DIMENSIONS,

TOLERANCES, TOOLING AND ITS REQUIREMENTS.

PESS-XX-XX-X-XX.XX-XX-XXX

BY:

E WRIGHT 02/16/2010 SHEET 1 OF 2

F:\DWG\MISC\MKTG\PESS-XX-XX-X-XX.XX-XX-XXX-MKT.SLDDRW

IN PROCESS 1

REVISION J

(ADD LTC-28)

LTC-28

XX.XX[XXX.X] 2%

NOTCH-UP

3.20 .126

"C" 0.25[.010]

(SEE TABLE 1)

IN PROCESS 2

(FILL DWC-XX-10-600)

NOTCH-UP

FIG 2

(PESS-04-XX-X-XX.XX-DR-NUS)

(SAME AS FIG 1, DIFFERENT AS SHOWN)

DWC-XX-10-600

IPS6C-XX-X

XX.XX[XXX.X] 2%

IN PROCESS 3

(ADD IPS6C-XX-X)

30.6 1.21

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

NOTCH-UP

NOTCH-DOWN

FIG 3

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

PESS CABLE ASSEMBLY

(PESS-04-XX-X-XX.XX-DR-NDS)

(SAME AS FIG 1, DIFFERENT AS SHOWN)

DWG. NO.

PESS-XX-XX-X-XX.XX-XX-XXX

F:\DWG\MISC\MKTG\PESS-XX-XX-X-XX.XX-XX-XXX-MKT.SLDDRW

BY:

E WRIGHT 02/16/2010 SHEET 2 OF 2

相关型号：