QSE-070-02-H-D-DP-LC [SAMTEC]

Board Stacking Connector, 140 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Locking, Black Insulator;


型号：	QSE-070-02-H-D-DP-LC
厂家：	SAMTEC
描述：	Board Stacking Connector, 140 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Locking, Black Insulator PC 连接器
文件：	总4页 (文件大小：705K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

REVISION AO

QSE-XXX-XX-XXX-D-DP-XXX-XXXXX

PIN COUNT, BANKS 1-5

No OF POSITIONS

(SEE NOTES 11, 13 & 14)

-014, -028, -042, **-056, **-070

(PER ROW)

** = SEE NOTES 13 & 17

(SEE NOTE 11)

DO NOT

SCALE FROM

THIS PRINT

-S: STANDARD

-D: DIFFERENTIAL

(SEE NOTE 10 &

FIG 6, SHT 4)

OPTION

-A: ALIGNMENT PINS

** = SEE NOTES 13 & 17

(USE QSE-20-01-D-XX-A)

(NOT AVAILABLE WITH -LC)

-LC: LOCKING CLIPS (SEE NOTE 15)

(USE LC-08-TM-01, SEE FIG 2, SHT 2)

(NOT AVAILABLE WITH -A)

LEAD STYLE

-01: .1280 [3.30]

** = SEE NOTES 13 & 17

-02: .2460[6.248]

PLATING SPECIFICATION

-K: POLYIMIDE FILM

"A" REF

PLATING THICKNESSES ARE FOR

SIGNAL PINS ONLY. FOR GROUND

PLANE THICKNESSES, SEE PP-T-1G2-XX-X.

(SEE NOTES 7, 12 & 14)

-F: 3µ" SELECTIVE GOLD CONTACT,

MATTE TIN TAIL

(USE C-126-21-F, T-1G2-01-F)

-L: 10µ" SELECTIVE GOLD CONTACT,

MATTE TIN TAIL

(USE K-DOT-.325-.450-.005, SEE FIG 3, SHT 2)

-TR: TAPE & REEL (42 POS MAX)

(28 POS MAX FOR -GP)

6 EQ SPACES @ .0945 [2.400]

= .5670[14.402] (TYP)

-GP: GUIDE POSTS

.0945 2.400

(USE QSE-20-XX-D-GP, SEE FIG 4, SHT 3)

-RT1: RETENTION (MUST USE -A OPTION)

(USE QSE-20-01-D-XX-A-RT1

REF

.7875 20.003 (TYP)

& SUB-SC-05-01-FF) (SEE FIG 5, SHT 3)

(NOT AVAILABLE WITH -LC OR -GP)

(NOT AVILABLE IN 056 OR 070 POS)

-L: LATCHING OPTION (28 POS MAX)

(SEE FIG 8, SHT 4)

(USE C-126-21-L, T-1G2-01-L)

-H: 30µ" GOLD CONTACT, 3µ" GOLD TAIL

(USE C-126-21-H, T-1G2-01-G)

-C: 50µ" ELECTRO POLISHED SELECTIVE

GOLD CONTACT, MATTE TIN TAIL

(USE C-126-21-C, T-1G2-01-L)

-STL: 30µ" SELECTIVE GOLD CONTACT,

TIN LEAD (90/10 ±5%) TAILS

.138 3.52 REF

.022 0.57 REF

.032 0.80 REF

(MUST USE -A OPTION)

(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1)

.625 15.88 REF

.006 0.15 REF

.285 7.24

REF

BODY STYLE

-DP: DIFFERENTIAL PAIRS

(USE C-126-21-STL, T-1G2-01-STL)

-FTL: 3µ" SELECTIVE GOLD CONTACT,

TIN LEAD (90/10 ±5%) TAILS

QSE-20-01-D-XX-A

ROW SPECIFICATION

.120 3.05

REF

-D: DOUBLE (USE QSE-20-01-D-XX)

SEE NOTE 16

(USE C-126-21-FTL, T-1G2-01-FTL)

-S: 30µ" SELECTIVE GOLD CONTACT,

MATTE TIN TAIL

"A"

No OF BANKS

* = NOT TOOLED

** = SEE NOTE 13

(USE C-126-21-S, T-1G2-01-L)

.725 18.42 REF

"B" REF

.038 0.95

REF

.0030 0.076 REF

C-126-21-XXX

*** (SEE NOTE 14)

T-1G2-01-XXX

+.004

-.002

+0.10

-0.05

.167

4.24

.105 2.67

REF

.006 0.15 REF

+.0030

-.0010

+0.076

-0.025

.1280

3.25

.035 0.89 REF

(2 PLCS)

(SEE NOTE 5 & 6)

SEE TABLE 1

FIG 1

NOTES:

-A: ALIGNMENT PIN OPTION

(QSE-042-01-XXX-D-DP-A SHOWN)

REPRESENTS A CRITICAL DIMENSION.

2. MINIMUM TERMINAL RETENTION: 5 OZ.

.295 7.49 REF

3. MINIMUM GROUND PLANE RETENTION: 8 OZ.

4. PARTS TO BE MOLDED TO POSITION.

5. MAXIMUM VARIANCE: .002 [0.05].

.007 0.18 REF

.064 1.62 REF

6. DIMENSION APPLIES TO TERMINALS AND GROUND PLANE.

7. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.

SECTION "A"-"A"

SCALE 5:1

8. GROUND PLANE PRESS HEIGHT MUST BE .003[0.08] LESS THAN THE MAXIMUM

HEIGHT OR .001[0.03] GREATER THAN THE MINIMUM HEIGHT OF THE SOCKETS.

9. SUB-SC-05-01-XX RETENTION TO BE 1.0 LBF IN BODY.

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

10. IF ORDERING ALL BANKS DIFFERENTIAL PAIR, LEAVE BLANK. IF ORDERING ALL

BANKS STANDARD PIN COUNT, ORDER QSE-XXX-XX-X-D-XXX (STANDARD QSE)

11. PIN COUNT PER ROW= (# -DP BANKS X 14) + (# -S BANKS X 20)

12. MAY SUB C-126-01-XXX FOR C-126-21-XXX.

TOLERANCES ARE:

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DECIMALS

ANGLES

.XX: .01 [.25]

.XXX: .005 [.13]

.XXXX: .0020 [.05]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733

FAX: 812-948-5047

code 55322

13. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE CONTACT SAMTEC

INTERCONNECT PROCESSING GROUP.

e-Mail info@SAMTEC.com

DO NOT SCALE DRAWING

SHEET SCALE: 1.5:1

DESCRIPTION:

MATERIAL:

14. FOR -056, -070 POSITIONS USE C-269-11-XXX. DO NOT SUB C-126.

15. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION

IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS

MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.

16. SIDE WALLS ARE RIBBED AS NECESSARY TO CONTROL BOW.

17. AVAILABLE FOR EXISTING CUSTOMERS ONLY.

.8mm DIFFERENTIAL PAIRS HS SOCKET ASSEMBLY

INSULATOR: LCP, UL94V0; COLOR: BLACK

CONTACT: PHOS BRONZE

GROUND PLANE: PHOS BRONZE

DWG. NO.

QSE-XXX-XX-XXX-D-DP-XXX-XXXXX

5/05/2000

F:\DWG\MISC\MKTG\QSE-XXX-XX-XXX-D-DP-XXX-XXXXX-MKT.SLDDRW

DEAN P

SHEET 1 OF 4

BY:

REVISION AO

.0375 0.953

.056 1.42

.055 1.40

LC-08-TM-01

.010 0.25 REF

"B" .003

(SEE TABLE 2, SHT 1)

FIG 2

-LC: LOCKING CLIP OPTION

(QSE-042-01-XXX-D-DP-LC SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

** = SEE NOTES 13 & 17

"R" REF

"S" .020

.020±.010 0.51±0.25

.133 3.38

.325 8.26

F:\DWG\MISC\MKTG\QSE-XXX-XX-XXX-D-DP-XXX-XXXXX-MKT.SLDDRW

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

FIG 3

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

-K: POLYIMIDE FILM PAD

(USE K-DOT-.325-.450-.005)

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

.8mm DIFFERENTIAL PAIRS HS SOCKET ASSEMBLY

DWG. NO.

QSE-XXX-XX-XXX-D-DP-XXX-XXXXX

BY:

DEAN P

5/05/2000

SHEET 2 OF 4

REVISION AO

"C" REF

"D" REF

.102 2.58

REF

** = SEE NOTES 13 & 17

.207 5.26 REF

.140 3.56 THRU REF

QSE-20-XX-D-A-GP

.124 3.15 REF

FIG 4

-GP OPTION

(QSE-042-01-XXX-D-DP-GP SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

(AVAILBLE ON LEAD STYLES -01 & -01-A ONLY)

(28 POSITION MAX FOR TAPE & REEL PACKAGING)

"E" REF

+.003

-.004

[0.08]

[0.10]

"F"

"D"

** = SEE NOTES 13 & 17

QSE-20-01-D-XX-A-RT1

.045 1.14 REF

'E'

.150 3.81

(SEE NOTE 9)

SUB-SC-05-01-FF (2 PLCS)

DETAIL 'E'

SCALE 3 : 1

.148 3.76 REF

SECTION "D"-"D"

SCALE 1.5 : 1

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

FIG 5

-RT1: RETENTION OPTION

DESCRIPTION:

(QSE-042-01-XXX-D-DP-A-RT1 SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

(MUST USE -A OPTION)

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

.8mm DIFFERENTIAL PAIRS HS SOCKET ASSEMBLY

DWG. NO.

(NOT AVAILABLE WITH -LC OR -GP OPTIONS)

(NOT AVAILABLE WITH **-056 & **-070)

QSE-XXX-XX-XXX-D-DP-XXX-XXXXX

SHEET 3 OF 4

BY:

DEAN P

5/05/2000

F:\DWG\MISC\MKTG\QSE-XXX-XX-XXX-D-DP-XXX-XXXXX-MKT.SLDDRW

REVISION AO

FIG 6

(**QSE-070-01-XXX-D-DP-A-DDDDS)

(** = SEE NOTES 13 & 17)

DIFFERENTIAL PAIR BANKS

SINGLE ENDED BANK

FIG 7

(QSE-042-01-XXX-D-DP-A-DSD SHOWN)

DIFFERENTIAL PAIR BANKS

"G" REF

.030 0.76 REF

"H"

** = SEE NOTES 13 & 17

.020 0.51 REF

QSE-20-01-D-XX-A-L

.160 4.06 REF

WT-56-01-T

.053 1.35

.010 0.25 REF

.025 0.64 REF

"J"

FIG 8

-L: LATCHING OPTION

(QSE-020-01-XXX-D-DP-A-L SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

(MUST USE -A OPTION) (MAXIMUM 28 POS)

(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1)

CRITICAL DIMENSION INSPECTION INSTRUCTION TABLE

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

IN-PROCESS INSPECTION

ASSEMBLY OPERATION

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

FILL C-126-21

C1, C3, C12

C4, C6

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

ADD -RT1 OPTION

ADD -L OPTION

ADD -K OPTION

DO NOT SCALE DRAWING

SHEET SCALE: 1.375:1

.8mm DIFFERENTIAL PAIRS HS SOCKET ASSEMBLY

DWG. NO.

C7, C8, C9, C15

C10, C11

QSE-XXX-XX-XXX-D-DP-XXX-XXXXX

DEAN P

5/05/2000

SHEET 4 OF 4

BY:

F:\DWG\MISC\MKTG\QSE-XXX-XX-XXX-D-DP-XXX-XXXXX-MKT.SLDDRW

相关型号：