QSE-080-01-FTL-D-FL [SAMTEC]

Board Stacking Connector;


型号：	QSE-080-01-FTL-D-FL
厂家：	SAMTEC
描述：	Board Stacking Connector
文件：	总5页 (文件大小：774K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

REVISION BH

QSE-XXX-01-XXX-D-XXX

OPTION

No OF POSITIONS

-A: ALIGNMENT PINS

-020, -040, -060

(USE QSE-20-XX-D-XX-A)

(NOT AVAILABLE WITH -LC OPTION)

-LC: LOCKING CLIPS(SEE NOTE 14)

(USE LC-08-TM-01, SEE FIG 2, SHT 2)

(NOT AVAILABLE WITH -A OPTION)

-GP: GUIDE POSTS (SEE FIG 4, SHT 3)

(USE QSE-20-01-D-XX-X-GP)

(T & R PACKAGING: 40 POS MAX)

-K: POLYIMIDE FILM

DO NOT

SCALE FROM

THIS PRINT

*-080, *-100 (PER ROW)

(*= SEE NOTE & 17)

LEAD STYLE

-01: .1280[3.251]

(*= SEE NOTE 17)

PLATING SPECIFICATION

(USE K-DOT-.325-.450-.005)

(SEE FIG 3, SHT 2)

(SEE NOTES 8, 11 & 13)

-TR: TAPE & REEL (60 POS MAX)

(SEE FIG 8, SHT 5)

-F: 3µ" SELECTIVE GOLD IN CONTACT

AREA, MATTE TIN ON TAIL

"A" REF

(40 POS MAX -GP OPTION)

-FL: FRICTION LOCKS

(USE C-126-21-F, T-1G2-01-F)

(SEE NOTE 8)

.7875 20.003 (TYP)

(SEE FIG 5, SHT 3)

-L: 10µ" SELECTIVE GOLD IN CONTACT

AREA, MATTE TIN ON TAIL

(NOT AVAILABLE WITH -GP)

-RT1: RETENTION OPTION

(MUST USE -A OPTION)

19 EQ. SPCS

@ .0315 [0.800]

=.599[15.20]

(TYP)

.285 7.24

REF

(USE C-126-21-L, T-1G2-01-L)

-H: 30µ" GOLD IN CONTACT AREA,

3µ" GOLD ON TAIL

(USE QSE-20-01-D-XX-A-RT1 &

SUB-SC-05-01-FF)

(SEE FIG 6, SHT 4)

(USE C-126-21-H, T-1G2-01-G)

-C: 50µ" ELECTRO POLISHED SELECTIVE

GOLD IN CONTACT AREA,

.150 3.81

REF

(NOT AVAILABLE WITH -LC, -GP, OR -FL)

(NOT AVAILABLE WITH -100 POS)

-L: LATCHING OPTION (40 POS MAX)

(SEE FIG 7, SHT 4)

MATTE TIN ON TAIL

.245 6.22

REF

(USE C-126-21-C, T-1G2-01-L)

-STL: 30µ" SELECTIVE GOLD IN CONTACT

AREA, TIN LEAD (90/10 ±5%) ON TAIL

(USE C-126-21-STL, T-1G2-01-STL)

-FTL: 3µ" SELECTIVE GOLD INCONTACT

AREA, TIN LEAD (90/10 ±5%) ON TAIL

(USE C-126-21-FTL, T-1G2-01-FTL)

-LTL: 10µ" SELECTIVE GOLD IN CONTACT

AREA, TIN LEAD (90/10 ±5%) ON TAIL

(USE C-126-21-LTL, T-1G2-01-LTL)

-S: 30µ" SELECTIVE GOLD IN CONTACT

AREA, MATTE TIN ON TAIL

(MUST USE -A OPTION)

(NOT AVAILABLE WITH -LC, -GP, -FL,

OR -RT1)

.6250 15.875

REF

.0975 2.477

REF

.0060 0.152 REF

ROW SPECIFICATION

-D: DOUBLE

(USE QSE-20-XX-D-XX)

.0225 0.571

REF

(USE C-126-21-S, T-1G2-01-L)

No OF BANKS

QSE-20-01-D-XX-A

SEE NOTE 15

"A"

.017±.005 0.43±0.13

(SEE NOTE 16)

.120 3.05

REF

.038 0.95

REF

"A"

.725 18.42

REF

.0030 0.076 REF

"B" REF

+.0030

-.0010

+0.076

3.251

-0.025

.1280

+.004

-.002

+0.10

4.24

-0.05

.167

(SEE NOTE 6 & 7)

T-1G2-01-XXX

.105 2.67

REF

SEE TABLE 1

.064 1.62 REF

NOTES:

.295 7.491

.035 0.89 REF

REPRESENTS A CRITICAL DIMENSION.

2. MINIMUM CONTACT RETENTION: 8 OZ

3. MINIMUM GROUND PLANE RETENTION: 8 OZ

4. PARTS ARE MOLDED TO POSITION.

5. DELETED.

6. MAXIMUM VARIANCE: .002[0.51].

7. DIMENSION APPLIES TO CONTACTS & GROUND PLANE.

8. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING, -G PLATED GROUND

PLANE CAN BE SUBSTITUTED FOR -F PLATED GROUND PLANE.

9. GROUND PLANE PRESS HEIGHT MUST BE .003 [0.08] LESS THAN THE MAX HEIGHT

OR .001 [0.03] GREATER THAN THE MINIMUM HEIGHT OF THE SOCKETS.

10. MINIMUM SUB-SC-05-01-XX RETENTION: 1 LB IN BODY.

11. MAY SUB C-126-01-XXX FOR C-126-21-XXX.

12. NOTE DELETED.

13. FOR -080, -100 POSITIONS USE C-269-11-XXX. DO NOT SUB C-126.

14. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION

IS NOT COMPATIBLE WITH AUTO PLACEMENT.SAMTEC RECOMMENDS

MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.

15. SIDE WALLS ARE RIBBED AS NECESSARY TO CONTROL BOW.

16. CHECK ONCE PER BANK ALTERNATING SIDES FOR MULTIPLE BANK PARTS.

17. AVAILABLE FOR EXISTING CUSTOMERS ONLY.

.007 0.18 REF

C-126-21-XXX

(SEE NOTE 13)

FIG 1

SECTION "A"-"A"

-A: ALIGNMENT PIN OPTION

(QSE-060-01-XXX-D-A SHOWN)

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

DECIMALS

ANGLES

.XX: .01[.3]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

.XXX: .005[.13]

PHONE: 812-944-6733

FAX: 812-948-5047

code 55322

.XXXX: .0020[.051]

e-Mail info@SAMTEC.com

MATERIAL:

DO NOT SCALE DRAWING

SHEET SCALE: 1.5:1

DESCRIPTION:

INSULATOR: LCP, UL94V-0; COLOR: BLACK

CONTACT: PHOS BRONZE

GROUND PLANE: PHOS BRONZE

.8mm DOUBLE ROW HS SOCKET ASSEMBLY

DWG. NO.

QSE-XXX-01-XXX-D-XXX

BY:

ERIC M

05/20/1999 SHEET 1 OF 5

F:\DWG\MISC\MKTG\QSE-XXX-01-XXX-D-XXX-MKT.SLDDRW

REVISION BH

.0375 0.953

QSE-20-01-D-XX

.055 1.40

LC-08-TM-01

.010 0.25 REF

.056 1.42 REF

"B"±.003[0.08]

(SEE TABLE 2, SHT 1)

FIG 2

-LC: LOCKING CLIP OPTION

(QSE-060-01-XXX-D-LC SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

(*= SEE NOTE 17)

"R" REF

.020±.010 0.51±0.25

"S"±.020[0.51]

.133 3.38

.325 8.26

FIG 3

-K: POLYIMIDE FILM PAD

(K-DOT-.325-.450-.005)

F:\DWG\MISC\MKTG\QSE-XXX-01-XXX-D-XXX-MKT.SLDDRW

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

.8mm DOUBLE ROW HS SOCKET ASSEMBLY

DWG.

^NO.QSE-XXX-01-XXX-D-XXX

BY:

ERIC M

05/20/1999 SHEET 2 OF 5

REVISION BH

"C" REF

"D" REF

.102 2.58 REF

(*= SEE NOTE 17)

.207 5.26 REF

.1400 3.556 THRU REF

QSE-20-01-D-XX-A-GP

FIG 4

-GP: GUIDE POST OPTION

(QSE-060-01-XXX-D-A-GP SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

(40 POS MAX WITH T & R PACKAGING)

.005 0.13 REF

.080 2.03

REF (TYP)

"B"

.026 0.66

REF (TYP)

DETAIL 'C'

SCALE 8 : 1

.005 0.13 REF

QSE-20-01-D-XX-FL

FIG 5

-FL: FRICTION LOCKS

(QSE-020-01-XXX-D-FL SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

(NOT AVAILABLE WITH -GP OPTION)

'C'

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

SECTION "B"-"B"

SCALE 4 : 1

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

.8mm DOUBLE ROW HS SOCKET ASSEMBLY

DWG. NO.

QSE-XXX-01-XXX-D-XXX

F:\DWG\MISC\MKTG\QSE-XXX-01-XXX-D-XXX-MKT.SLDDRW

BY:

ERIC M

05/20/1999 SHEET 3 OF 5

REVISION BH

"E" REF

"F"±.003[0.08]

"D"

(*= SEE NOTE 17)

.045 1.14

REF

"D"

QSE-20-01-D-XX-A-RT1

^C.150 3.81

(SEE NOTE 10)

'E'

.148 3.76 REF

DETAIL 'E'

SCALE 3 : 1

SUB-SC-05-01-FF (2 PLCS)

FIG 6

SECTION "D"-"D"

-RT1: RETENTION OPTION

(QSE-060-01-XXX-D-A-RT1 SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

(MUST USE -A OPTION)

(NOT AVAILABLE WITH -LC, -GP, OR -FL OPTIONS)

(NOT AVAILABLE WITH -100 POS)

"G" REF

.030 0.76

REF

"H"

(*= SEE NOTE 17)

.020 0.51 REF

QSE-20-01-D-XX-A-L

.010 0.25 REF

.160 4.06

REF

.0530 1.346

.025 0.64 REF

WT-56-01-T

"J"

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

FIG 7

PHONE: 812-944-6733

e-Mail info@SAMTEC.com

DESCRIPTION:

FAX: 812-948-5047

-L: LATCHING OPTION

code 55322

(QSE-040-01-XXX-D-A-L SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

(MUST USE -A OPTION) (40 POS MAX)

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

.8mm DOUBLE ROW HS SOCKET ASSEMBLY

^NO.QSE-XXX-01-XXX-D-XXX

DWG.

(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1 OPTIONS)

F:\DWG\MISC\MKTG\QSE-XXX-01-XXX-D-XXX-MKT.SLDDRW

BY:

ERIC M

05/20/1999 SHEET 4 OF 5

REVISION BH

FIG 8

-TR: PACKAGING OPTION

(QSE-060-01-XXX-D-LC-TR SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

(60 POS MAX)

(40 POS MAX WITH -GP OPTION)

POSITION 1 TOWARD

ROUND HOLE

USER DIRECTION OF UNREELING

POCKET NOT DETAILED

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

.8mm DOUBLE ROW HS SOCKET ASSEMBLY

DWG. NO.

QSE-XXX-01-XXX-D-XXX

F:\DWG\MISC\MKTG\QSE-XXX-01-XXX-D-XXX-MKT.SLDDRW

BY:

ERIC M

05/20/1999 SHEET 5 OF 5

相关型号：