QTH-040-01-F-D-DP-RA-PGP [SAMTEC]

Board Stacking Connector;


型号：	QTH-040-01-F-D-DP-RA-PGP
厂家：	SAMTEC
描述：	Board Stacking Connector
文件：	总6页 (文件大小：843K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

QTH-XXX-XX-X-D-DP-RA-XXX

REVISION A

OPTION

No OF POSITIONS (PER ROW)

-020, -040, -060

-PGP:PLASTIC GUIDE POSTS

"A" REF

"C"

DO NOT

SCALE FROM

THIS PRINT

(SEE FIG 3, SHT 5)

*-MGP:METAL GUIDE POSTS

(SEE FIG 2, SHT 5)

LEAD STYLE

-01 (SEE NOTE 12)

-K: KAPTON DOT

"D"

(SEE FIG 5, SHT 6)

(USE K-DOT-.276-.375-.005)

*-LS1: LOCKING SCREW

(SEE FIG 4, SHT 6)

.270 6.86

REF

(FOR MATING WITH

QSH-...-RA-..LS1)

PLATING SPECIFICATION

(SEE SHEET 2, TABLE 4)

.385 9.78

REF

-F: 3µ" SELECTIVE GOLD

ON CONTACT AREA,

MATTE TIN ON TAIL

-RA: RIGHT ANGLE

.050 1.27

.120 3.05

REF

-L: 10µ" SELECTIVE GOLD

ON CONTACT AREA,

MATTE TIN ON TAIL

-DP: DIFFERENTIAL PAIRS

POSITION 1 INDICATOR

"B" REF

ROW SPECIFICATION

-D: DOUBLE

QTH-30-XX-D-03-RA

.8250±.0030

[20.955 0.076]

(SEE NOTE 8)

.314 7.98

REF

* = NOT TOOLED

"A"

.348 8.85

REF

.235 5.97 REF

.191 4.85 REF

"A"

.025 0.64 SQ REF

(TYP) (SEE NOTE 8)

.1513 3.842

.015 0.38 REF

7 EQ. SPCS.

@ .080 [2.03]

= .560 14.22 REF.

FIG 1

MAX SWAY

(EITHER DIRECTION)

QTH-060-01-X-D-DP-RA SHOWN

(SOME CENTER FEATURES

REMOVED FOR CLARITY)

.7875 20.003

(TYP) (SEE NOTE 8)

"E" REF

.1458 3.702

(BOTH ROWS)

.043 1.10 REF

.052 1.32 REF

.150 3.81 REF

(2 PLCS)

.052 1.32 REF

.008 0.20 REF (TYP)

.7875 20.003 (TYP)

(BOTH ROWS) (SEE NOTE 8)

9 EQ. SPCS. @ .059 [1.50]=

.532 13.50 BOTH ROWS

NOTES:

PROPRIETARY NOTE

REPRESENTS A CRITICAL DIMENSION.

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

2. BURR ALLOWANCE: .0010 MAX.

TOLERANCES ARE:

DECIMALS

3. MINIMUM PUSHOUT FORCE: SIGNAL: 0.5 LB.

GROUND PLANE & WELD TABS: 1.0 LB.

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

ANGLES

.XX: .01 [0.3]

4. IF NEEDED, -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

.XXX: .005 [0.13]

5. MAX TORQUE ON STS-02 TO BE 20 IN-OZ. USE DRIVER COMPATIBLE WITH 61P TORX HEAD.

6. TIPS OF TERMINALS MAY NOT EXTEND BEYOND THIS SURFACE.

7. ASSEMBLIES TO BE PACKAGED IN TRAYS.

.XXXX: .0020 [0.051]

SHEET SCALE: 1:1

DO NOT SCALE DRAWING

DESCRIPTION:

MATERIAL:

8. CENTER WELD TABS ARE NOT AVAILABLE ON -020 POSITION.

9. USE -Z- DATUM ZONE ONLY FOR MEASUREMENTS.

10. DIMENSION TO BE MEASURED ON BOTH ENDS OF THE PART.

11. SEE APPLICABLE IN-PROCESS VIEW FOR INSPECTION ORIENTATION.

12. DESIGNED FOR USE WITH A .062 OR .093 PCB.

.50mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP

DWG. NO.

INSULATOR: LCP UL94V-0, COLOR: BLACK

TERMINAL, GROUND PLANE & WELD TAB: PHOS BRONZE

QTH-XXX-XX-X-D-DP-RA-XXX

F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-DP-RA-XXX-MKT.SLDDRW

BY:

G PURVIS 11/18/2013 SHEET 1 OF 6

REVISION A

T-1S53-01-XXX

(SEE TABLE 4)

.024 0.61 REF

IM-1G14-01-2-XXX

(SEE TABLE 4)

.098 2.49 REF

-C-

T-1S52-01-XXX

(SEE TABLE 4)

T-1S52-01-XXX

(SEE TABLE 4)

.1540 3.912

(MEASURED TERMINAL

TO TERMINAL)

.0019 0.048

(SEE NOTES 9, 10, & 11)

'C'

WT-16-05-T

SEE NOTE 6

'B'

DETAIL 'B'

SCALE 12 : 1

SEE TABLE 2

(TOP ROW & BOTTOM ROW)

.055 1.40

(LOCATE ASSY ON DATUM -C-

FOR MEASUREMENT)

(SEE NOTE 9)

.040 1.02 REF

.012 0.30 REF

.063 1.59

(SEE NOTE 9)

.071 1.79 REF

.025 0.64 REF (TYP)

-C-

.050 1.27

T-1S53-01-XXX

(SEE TABLE 4)

.025 0.64 REF

.110 2.79

.184 4.66

.0014 0.036

(SEE NOTE 9, 10 & 11)

.270 6.86

-C-

.299 7.59

DETAIL 'C'

SCALE 12 : 1

SECTION "A"-"A"

SCALE 12 : 1

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733

FAX: 812-948-5047

e-Mail info@SAMTEC.com

code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 6:1

.50mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP

DWG. NO.

QTH-XXX-XX-X-D-DP-RA-XXX

BY:

G PURVIS 11/18/2013 SHEET 2 OF 6

F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-DP-RA-XXX-MKT.SLDDRW

REVISION A

-C-

QTH-30-XX-D-XX-RA

-C-

.0019 0.05

.110 2.79

(SEE NOTE 9)

T-1S52-01-XXX

(SEE TABLE 4, SHT 2)

SEE TABLE 2, SHT 2

(WITHIN ROW)

T-1S52-01-XXX

(SEE TABLE 4, SHT 2)

SEE TABLE 2, SHT 2

(WITHIN ROW)

.110 2.79

.0019 0.048

(SEE NOTE 9)

.0019 0.05

IN-PROCESS 1

(SEE NOTE 9)

DETAIL 'D'

SCALE 4 : 1

DETAIL 'E'

SCALE 4 : 1

(FILL BOTTOM ROW)

(SEE INSPECTION VIEW 1 FOR ORIENTATION AND CPC'S)

'E'

'D'

IM-1G14-01-2-XXX

(SEE TABLE 4, SHT 2)

-C-

INSPECTION VIEW 1

(FILL BOTTOM ROW)

-C-

.063 REF

(SEE NOTE 9)

.184 4.66 REF

.184 4.66

IM-1G14-01-2-XXX

(SEE TABLE 4, SHT 2)

IN-PROCESS 2

(FILL IM-1G14)

(SEE INSPECTION VIEW 2 FOR ORIENTATION AND CPC'S)

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

.063

(SEE NOTE 9)

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

.063

(SEE NOTE 9)

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 6:1

.50mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP

DWG. NO.

INSPECTION VIEW 2

QTH-XXX-XX-X-D-DP-RA-XXX

(FILL IM-1G14)

BY:

G PURVIS 11/18/2013 SHEET 3 OF 6

F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-DP-RA-XXX-MKT.SLDDRW

REVISION A

'F'

-C-

T-1S53-01-XXX

(SEE TABLE 4, SHT 2)

.1540 3.912

REF

.0014 0.036

SEE TABLE 2, SHT 2

(WITHIN ROW)

.299 7.59

REF

-C-

.299 7.59

IN-PROCESS 3

(FILL TOP ROW)

(SEE INSPECTION VIEW 3 FOR ORIENTATION AND CPC'S)

T-1S53-01-XXX

(SEE TABLE 4, SHT 2)

SEE TABLE 2, SHT 2

(WITHIN ROW)

.0014 0.036

(SEE NOTE 9)

DETAIL 'H'

SCALE 4 : 1

.1540 3.912

.0014 0.04

DETAIL 'G'

SCALE 4 : 1

(MEASURE TERMINAL

TO TERMINAL)

(SEE NOTE 9)

DETAIL 'F'

SCALE 4 : 1

'G'

'H'

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

INSPECTION VIEW 3

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

(FILL TOP ROW)

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 6:1

.50mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP

DWG. NO.

QTH-XXX-XX-X-D-DP-RA-XXX

BY:

G PURVIS 11/18/2013 SHEET 4 OF 6

F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-DP-RA-XXX-MKT.SLDDRW

REVISION A

"H" REF

.355 9.02

REF

.200 5.08

QTH-30-XX-D-03-RA-MGP

WT-74-01-T

"J"

.125 3.18 REF

.118 2.98

.251 6.37

REF

.055 1.40 REF.

(SEE NOTE 9)

.270 6.86 REF

.035 0.89

REF

FIG 2

QTH-060-01-X-D-DP-RA-MGP SHOWN

(SAME AS FIG 1, EXCEPT AS SHOWN)

(SOME CENTER FEATURES REMOVED FOR CLARITY)

(NOT TOOLED)

"J"

"H" REF

.200 5.08

REF

QTH-30-XX-D-03-RA-PGP

"J" REF

.125 3.18 REF

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

.191 4.85

REF

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

.50mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP

DWG. NO.

FIG 3

QTH-060-01-X-D-DP-RA-PGP SHOWN

(SAME AS FIG 1, EXCEPT AS SHOWN)

(SOME CENTER FEATURES REMOVED FOR CLARITY)

QTH-XXX-XX-X-D-DP-RA-XXX

BY:

G PURVIS 11/18/2013 SHEET 5 OF 6

F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-DP-RA-XXX-MKT.SLDDRW

REVISION A

MAX SWAY

.100 2.54 REF

"J"

(EITHER DIRECTION)

"H" REF.

"J" REF

STS-02

(SEE NOTE 5)

.25 6.3

QTH-30-XX-D-02-RA-LS1

.072 1.83 REF

SP-20-01-T

.055 1.40

(SEE NOTE 9)

SCREW CANNOT

PROTRUDE BEYOND

THIS SURFACE

.191 4.85 REF

.089 REF

.270 6.86

.035 0.89 REF

SECTION "J"-"J"

FIG 4

QTH-040-01-X-D-DP-RA-LS1 SHOWN

(SAME AS FIG 1, EXCEPT AS SHOWN)

(SOME CENTER FEATURES REMOVED FOR CLARITY)

(NOT TOOLED)

"J"

.005 0.13 REF

K-DOT-.276-.375-.005

.28 7.0 REF.

.35 9.0

.06±.02 1.5±0.5

"L" .020[0.51]

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

FIG 5

QTH-060-01-X-D-DP-RA-PGP-K SHOWN

(SAME AS FIG 1, EXCEPT AS SHOWN)

DESCRIPTION:

DO NOT SCALE DRAWING

.50mm DOUBLE ROW RIGHT ANGLE TERMINAL STRIP

DWG. NO.

(SOME CENTER FEATURES REMOVED FOR CLARITY)

SHEET SCALE: 1:0.666667

QTH-XXX-XX-X-D-DP-RA-XXX

BY:

G PURVIS 11/18/2013 SHEET 6 OF 6

F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-DP-RA-XXX-MKT.SLDDRW

相关型号：