RF402-01RP7-92SJP-1000 [SAMTEC]

Cable Assembly;


型号：	RF402-01RP7-92SJP-1000
厂家：	SAMTEC
描述：	Cable Assembly
文件：	总2页 (文件大小：665K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

THIS PRODUCT MANUFACTURED

WITH LEAD-FREE PROCESSING

RX402-XXXXX-XXXXX-XXXX

DESIGNED & DIMENSIONED

IN MILLIMETERS[INCHES]

REVISION G

OVERALL CABLE LENGTH

OPTION

MILLIMETERS OF CABLE (SEE NOTES 8 & 9)

0100 MIN - 1000 MAX FOR RF402 (SEMI-

FLEXIBLE)

F: SEMI FLEXIBLE

*R: SEMI RIGID

(SEE NOTE 10)

DO NOT

SCALE FROM

THIS PRINT

FIG 2

CABLE STRIPPING DIMENSIONS

0100 MIN - 0305 MAX FOR RR402 (SEMI-RIGID)

PER CONFIGURATIONS

(SEE NOTES 12,13,14)

CABLE CALLOUT

END 2 PLATING OPTION

1: GOLD ALL COMPONENTS

402: CCA-402-X(RG-402 COAXIAL CABLE)

4: ALTERNATE GOLD /GOLD FLASH/ NICKEL

6. ALTERNATE H GOLD / H GOLD / NICKEL

7. ALTERNATE GOLD MEDIUM/ GOLD FLASH

9. ALTERNATE HEAVY GOLD/MEDIUM GOLD

P: HEAVY GOLD / PASSIVATED STAINLESS STEEL

(SEE SHEET 2 FOR PLATING SPECIFICS)

(LEAVE BLANK FOR -SING OR -XXXX

END 2 PREPARATION)

"A" mm

"B" mm

END 1 CONNECTOR

-01SP: SMA-P-C-XX-ST-CA9 (SEE SHEET 2)

-01RP: SMA-P-C-XX-RA-CA9 (SEE SHEET 2)

-92SJ: 292XX-J-C-XX-ST-CA9 (SEE SHEET 2)

-92SP: 292XX-P-C-XX-ST-CA9 (SEE SHEET 2)

END 1 PLATING OPTION

1: GOLD ALL COMPONENTS

"D" mm

END 2 CONNECTOR OR PREPARATION

-01SP: SMA-P-C-XX-ST-CA9 (SEE SHEET 2)

-01RP: SMA-P-C-XX-RA-CA9 (SEE SHEET 2)

-92SJ: 292XX-J-C-XX-ST-CA9 (SEE SHEET 2)

-92SP: 292XX-P-C-XX-ST-CA9 (SEE SHEET 2)

-SING: SINGLE ENDED (ONE END ONLY, SEE NOTE 11)

-XXXX : STRIPPED AND TINNED (THIS END ONLY-

SEE NOTES 11-16 & SHEET 2, FIG 3)

4: ALTERNATE GOLD /GOLD FLASH/ NICKEL

6. ALTERNATE H GOLD / H GOLD / NICKEL

7. ALTERNATE GOLD MEDIUM/ GOLD FLASH

9. ALTERNATE HEAVY GOLD/MEDIUM GOLD

P: HEAVY GOLD / PASSIVATED STAINLESS STEEL

(SEE SHEET 2 FOR PLATING SPECIFICS)

* = NOT RELEASED

(SEE FIG 2) "B" FORMAT: X.X mm

(SEE FIG 2) "A" FORMAT: X.X mm

DO NOT LEAVE ANY SPACE BLANK,

EACH MUST CONTAIN A

NUMERIC CHARACTER 0 THRU 9.

NOTES:

REPRESENTS A CRITICAL DIMENSION.

2. CABLE CUT LENGTH:

= (LENGTH: XXXX) - (SUBTRACTOR FOR END 1) - (SUBTRACTOR FOR END 2).

(SEE TABLE 1 FOR SUBTRACTORS)

3. ASSEMBLY TO BE 100% TESTED FOR OPENS & SHORTS.

4. ASSEMBLY TO BE 100% HI-POT TESTED PER TABLE 1, THE TEST VOLTAGE FOR THE ASSEMBLY

SHOULD BE SET TO THE END OPTION WITH THE LOWEST TEST VOLTAGE RATING.

5. AFTER FINAL ELECTRICAL TESTS, LABEL EACH CABLE ASSEMBLY WITH 1 LABEL -ET.

6. CRITICALS ON CONNECTOR PRINTS TO BE CHECKED IN PROCESS.

7. FINISHED ASSEMBLIES TO BE PACKAGED PER PACKAGING STANDARD CO-HD-WI-3040-M.

8. CABLE STOCKED IN INCHES, 1 INCH = 25.4 MILLIMETERS.

FIG 1

RF402-01SPX-01RPX-XXXX SHOWN

9. CABLE LENGTHS LONGER THAN 1000 MILLIMETERS ARE NOT SUPPORTED BY S.I. TEST DATA.

10. MINIMUM BEND RADIUS FOR RF402 = 6.35 [0.250],

RR402 SUPPLIED AS STRAIGHT ASSEMBLIES ONLY, WITH MAX LENGTH = 585[23"].

11. FOR SING ENDED OR STRIPPED AND TINNED ASSEMBLIES: MAKE A DOUBLE ENDED

ASSEMBLY AT TWICE THE CABLE LENGTH AND TEST BEFORE CUTTING ASSEMBLY IN HALF.

12. DIM "A" AND "B" HAVE A MINIMUM VALUE OF 0.0mm & A MAXIMUM VALUE OF 9.9mm.

13. PRODUCTION OF STRIP AND TIN FOR CENTER DIELECTIC USE: A.

14. PRODUCTION OF STRIP AND TIN FOR SHIELD USE: D=A+B.

F:\DWG\MISC\MKTG\RX402-XXXXX-XXXXX-XXXX -MKT.SLDDRW

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

MILLIMETERS [INCHES].

TOLERANCES ARE:

15. NOTE DELETED.

DECIMALS

ANGLES

16. FOR STRIPPED AND TINNED OPTION, ONLY THE CENTER CONDUCTOR IS TINNED.

17. CONNECTORS TO BE ORIENTED ACCORDING TO CO-HD-WI-3048-M.

.X: 0.3 [.01]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

.XX: 0.13 [.005]

.XXX: 0.051 [.0020]

MATERIAL:

SHEET SCALE: 2:1

DO NOT SCALE DRAWING

^DESCRIPTIOR^N:F402 OR RR402 CABLE ASSEMBLY

NO.

SEE END 1 AND END 2 ASSEMBLY PRINTS

^DWGR^.X402-XXXXX-XXXXX-XXXX

01/11/2011

SHEET 1 OF 2

BY: ALVIN W

REVISION G

-01SP

-01RP

(STRAIGHT PLUG)

(RIGHT ANGLE PLUG)

(USE DRAWING No. SMA-P-C-XX-ST-CA9

FOR ASSEMBLY INSTRUCTIONS)

(USE DRAWING No. SMA-P-C-XX-RA-CA9

FOR ASSEMBLY INSTRUCTIONS)

PLATING OPTIONS

2.00 .079

1: 30μ" MIN. GOLD CENTER CONTACT

3μ" MIN. GOLD OUTER CONTACT

3μ" MIN. GOLD REMAINING METAL PARTS

(END CONNECTOR P/N: SMA-P-C-HF-ST-CA9)

1: 30μ" MIN. GOLD CENTER CONTACT

3μ" MIN. GOLD OUTER CONTACT

3μ" MIN. GOLD REMAINING METAL PARTS

(END CONNECTOR P/N: SMA-P-C-HF-RA-CA9)

2.50 .098

4: 10μ" MIN. GOLD CENTER CONTACT

3μ" MIN. GOLD OUTER CONTACT

100μ" MIN. NICKEL REMAINING METAL PARTS

(END CONNECTOR P/N: SMA-P-C-GN-ST-CA9)

4: 10μ" MIN. GOLD CENTER CONTACT

3μ" MIN. GOLD OUTER CONTACT

100μ" MIN. NICKEL REMAINING METAL PARTS

(END CONNECTOR P/N: SMA-P-C-GN-RA-CA9)

7: 10μ" MIN. GOLD CENTER CONTACT

3μ" MIN. GOLD OUTER CONTACT

7: 10μ" MIN. GOLD CENTER CONTACT

3μ" MIN. GOLD OUTER CONTACT

4.50 .177

3μ" MIN. GOLD REMAINING METAL PARTS

(END CONNECTOR P/N: SMA-P-C-GF-ST-CA9)

3μ" MIN. GOLD REMAINING METAL PARTS

(END CONNECTOR P/N: SMA-P-C-GF-RA-CA9)

FIG 3

RX402-01SPX-2025-XXXX SHOWN

NOTE: ALL CRITICAL DIMENSIONS ON SMA-P-C-XX-ST-CA9

THAT APPLY MUST BE VERIFIED.

NOTE: ALL CRITICAL DIMENSIONS ON SMA-P-C-XX-RA-CA9

THAT APPLY MUST BE VERIFIED.

-92SP

_*-92SJ

(STRAIGHT PLUG)

(STRAIGHT JACK)

(USE DRAWING No. 292XX-P-C-XX-ST-CA9

FOR ASSEMBLY INSTRUCTIONS)

(USE DRAWING No. 292XX-J-C-XX-ST-CA9

FOR ASSEMBLY INSTRUCTIONS)

PLATING OPTIONS

6: 30μ" MIN. GOLD CENTER CONTACT

30μ" MIN. GOLD OUTER CONTACT

6: 30μ" MIN. GOLD CENTER CONTACT

30μ" MIN. GOLD OUTER CONTACT

3μ" MIN. GOLD REMAINING METAL PARTS

(END CONNECTOR P/N: 292PB-P-C-HH-ST-CA9)

3μ" MIN. GOLD REMAINING METAL PARTS

(END CONNECTOR P/N: 292PB-J-C-HH-ST-CA9)

F:\DWG\MISC\MKTG\RX402-XXXXX-XXXXX-XXXX -MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150

9: 30μ" MIN. GOLD CENTER CONTACT

10μ" MIN. GOLD OUTER CONTACT

9: 30μ" MIN. GOLD CENTER CONTACT

10μ" MIN. GOLD OUTER CONTACT

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

3μ" MIN. GOLD REMAINING METAL PARTS

(END CONNECTOR P/N: 292PB-P-C-HG-ST-CA9)

3μ" MIN. GOLD REMAINING METAL PARTS

(END CONNECTOR P/N: 292PB-J-C-HG-ST-CA9)

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

P: 30μ" MIN. GOLD CENTER CONTACT

PHONE: 812-944-6733

FAX: 812-948-5047

code 55322

P: 30μ" MIN. GOLD CENTER CONTACT

PASSIVATED STAINLESS STEEL OUTER CONTACT

3μ" MIN. GOLD REMAINING METAL PARTS

(END CONNECTOR P/N: 292PS-P-C-HP-ST-CA9)

e-Mail info@SAMTEC.com

PASSIVATED STAINLESS STEEL OUTER CONTACT

3μ" MIN. GOLD REMAINING METAL PARTS

(END CONNECTOR P/N: 292PS-J-C-HP-ST-CA9)

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 1:1

RF402 OR RR402 CABLE ASSEMBLY

DWG. NO.

NOTE: ALL CRITICAL DIMENSIONS ON 292XX-P-C-XX-ST-CA9

THAT APPLY MUST BE VERIFIED.

NOTE: ALL CRITICAL DIMENSIONS ON 292XX-J-C-XX-ST-CA9

THAT APPLY MUST BE VERIFIED.

RX402-XXXXX-XXXXX-XXXX

01/11/2011

SHEET 2 OF 2

BY: ALVIN W

相关型号：