RFB8T-78SP4-78SP6-0500 [SAMTEC]
Cable Assembly;
| 型号： | RFB8T-78SP4-78SP6-0500 |
| 厂家： | 
SAMTEC |
| 描述： | Cable Assembly |
| 文件： | 总2页 (文件大小：430K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RFB8T-XXXXX-XXXXXX-XXXX
REVISION J
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
Pb
OVERALL CABLE LENGTH
MILLIMETERS OF CABLE
0300 MIN. (SEE NOTE 8 & 9)
CABLE CALLOUT
B: CCA-1855A (BELDEN 1855A CABLE)
DO NOT
SCALE FROM
THIS PRINT
FIG. 2
END 2 PLATING OPTION
CABLE STRIPPING DIMENSIONS
(STRIPPED AND TINNED OPTION ONLY)
(SEE NOTES 12, 13, 14, &15)
2: ALTERNATE GOLD / NICKEL
3: ALTERNATE GOLD / NICKEL
END 1 CONNECTOR
4: GOLD / NICKEL COMBINATION
5: GOLD / NICKEL COMBINATION
6: GOLD / NICKEL COMBINATION
8. ALTERNATE HEAVY GOLD / GOLD FLASH /NICKEL
(SEE SHEET 2 FOR PLATING SPECIFICS)
(LEAVE BLANK FOR -SING OR -XXXXXX
END 2 PREPARATION)
-78SP: DIN7A-PP-C-XX-ST-CA8 (SEE SHEET 2)
-79SP: MBNC7-P-C-XX-ST-CA8 (SEE SHEET 2, SEE NOTE 18)
-79RP: MBNC7-P-C-XX-RA-CA8 (SEE SHEET 2, SEE NOTE 18)
-H4SP: HDBNC-P-C-XX-ST-CA8 (SEE SHEET 2)
"A" mm
"B" mm
"C" mm
C
END 1 PLATING OPTION
2: ALTERNATE GOLD / NICKEL
END 2 CONNECTOR OR PREPARATION
-78SP: DIN7A-PP-C-XX-ST-CA8 (SEE SHEET 2)
3: ALTERNATE GOLD / NICKEL
4: GOLD / NICKEL COMBINATION
5: GOLD / NICKEL COMBINATION
6: GOLD / NICKEL COMBINATION
8. ALTERNATE HEAVY GOLD / GOLD FLASH /NICKEL
(SEE SHEET 2 FOR PLATING SPECIFICS)
"D" mm
"E" mm
C
C
-79SP: MBNC7-P-C-XX-ST-CA8 (SEE SHEET 2, SEE NOTE 18)
-79RP: MBNC7-P-C-XX-RA-CA8 (SEE SHEET 2, SEE NOTE 18)
-H4SP: HDBNC-P-C-XX-ST-CA8 (SEE SHEET 2)
-SING: SINGLE ENDED (ONE END ONLY, SEE NOTE 11)
-XXXXXX: STRIPPED AND TINNED (ONE END ONLY-
SEE NOTES 11-16, SHEET 2, FIG 3)
(SEE FIG. 2) "C" FORMAT: X.X mm
(SEE FIG. 2) "B" FORMAT: X.X mm
(SEE FIG. 2) "A" FORMAT: X.X mm
DO NOT LEAVE ANY SPACE BLANK,
EACH MUST CONTAIN A
NUMERIC CHARACTER 0 THRU 9.
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION
2. CABLE CUT LENGTH:
= (LENGTH: XXXX) - (SUBTRACTOR FOR END 1) - (SUBTRACTOR FOR END 2) + 12.0 MM*
(SEE TABLE 1 FOR SUBTRACTORS)
(* = ONLY APPLICABLE IF USING A SEMI-AUTOMATED COAXIAL CABLE STRIPPER TO PROVIDE A CLEAN CUT EDGE)
3. ASSEMBLY TO BE 100% TESTED FOR OPENS & SHORTS
C
C 4. ASSEMBLY TO BE 100% HI-POT TESTED PER TABLE 1, THE TEST VOLTAGE FOR THE ASSEMBLY
SHOULD BE SET TO THE END OPTION WITH THE LOWEST TEST VOLTAGE RATING.
5. AFTER FINAL ELECTRICAL TEST, LABEL EACH CABLE ASSEMBLY WITH 1 LABEL-ET
6. CRITICALS ON CONNECTOR PRINTS TO BE CHECKED IN PROCESS.
7. FINISHED ASSEMBLIES TO BE PACKAGED PER PACKAGING STANDARD CO-RF-WI-3040-M.
LOCK WASHERS AND NUTS TO BE SHIPPED UNASSEMBLED. GASKETS TO BE INSTALLED ON CABLE.
8. CABLE STOCKED IN INCHES, 1 INCH = 25.4 MILLIMETERS
C
FIG 1
RFB8T-78SPX-79SPX-XXXX SHOWN
9. S.I. TEST DATA IS PUBLISHED FOR LENGHTS OF 300MM AND 1000MM. TESTING OF OTHER
SPECIFIC LENGTHS IS BY REQUEST.
CABLE STRIPPING DIMENSIONS
PER END 1 AND END 2 ASSEMBLY PRINTS
OR STRIPPED AND TINNED
10. MINIMUM BEND RADIUS FOR BELDEN 1855A = 38.1[1.5]
11. FOR SING ENDED OR STRIPPED AND TINNED ASSEMBLIES: MAKE A DOUBLE ENDED
ASSEMBLY AT TWICE THE CABLE LENGTH AND TEST BEFORE CUTTING ASSEMBLY IN HALF.
12. DIM "A", "B", AND "C" HAVE A MINIMUM VALUE OF 0.0mm & A MAXIMUM VALUE OF 9.9mm.
13. PRODUCTION OF STRIP AND TIN FOR CENTER DIELECTIC USE: A
(SEE NOTES 11-15, SHEET 2, FIG 3)
14. PRODUCTION OF STRIP AND TIN FOR SHIELD USE: D=A+B
F:\DWG\MISC\MKTG\RFB8T-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
15. PRODUCTION OF STRIP AND TIN FOR JACKET USE: E=A+B+C
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
16. FOR STRIP AND TIN OPTION, ONLY THE CENTER CONDUCTOR IS TINNED.
17. CONNECTORS TO BE ORIENTED ACCORDING TO CO-RF-WI-3048-M.
18. AVAILABLE TO EXISTING CUSTOMERS ONLY
MILLIMETERS [INCHES].
TOLERANCES ARE:
DECIMALS
ANGLES
2
.X: 0.3 [.01]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XX: 0.13 [.005]
.XXX: 0.051 [.0020]
MATERIAL:
SHEET SCALE: 2:1
DO NOT SCALE DRAWING
DESCRIPTION:
SEE END 1 AND END 2 ASSEMBLY PRINTS
TRUE 75 OHM, RF8T CABLE ASSEMBLY
NO.
DWGR. FB8T-XXXXX-XXXXXX-XXXX
BYJ: . BROWNING
05/13/2010
SHEET 1 OF 2
FIG 3
-78SP
-79SP
REVISION J
RFB8T-78SPX-102148-XXXX SHOWN
(SEE NOTE 11)
(STRAIGHT PLUG)
(STRAIGHT PLUG)
(USE DRAWING No. DIN7A-PP-C-XX-ST-CA8
FOR ASSEMBLY INSTRUCTIONS)
(USE DRAWING No. MBNC7-P-C-XX-ST-CA8
FOR ASSEMBLY INSTRUCTIONS)
AVAILABLE TO EXISTING CUSTOMERS ONLY
PLATING
4: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: DIN7A-PP-C-GF-ST-CA8)
PLATING
5: 10μ" MIN. GOLD CENTER CONTACT
2: 30μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: MBNC7-P-C-HN-ST-CA8)
10μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: DIN7A-PP-C-GG-ST-CA8)
6: 30μ" MIN. GOLD CENTER CONTACT
30μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: DIN7A-PP-C-HH-ST-CA8)
3: 10μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: MBNC7-P-C-GN-ST-CA8)
8: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: DIN7A-PP-C-HF-ST-CA8)
NOTE: ALL CRITICAL DIMENSIONS ON MBNC7-P-C-XX-ST-CA8
THAT APPLY MUST BE VERIFIED.
NOTE: ALL CRITICAL DIMENSIONS ON DIN7A-PP-C-XX-ST-CA8
THAT APPLY MUST BE VERIFIED.
-79RP
-H4SP
(RIGHT ANGLE PLUG)
(STRAIGHT PLUG)
(USE DRAWING No. MBNC7-P-C-XX-RA-CA8
FOR ASSEMBLY INSTRUCTIONS)
(USE DRAWING No. HDBNC-P-C-XX-ST-CA8
FOR ASSEMBLY INSTRUCTIONS)
AVAILABLE TO EXISTING CUSTOMERS ONLY
PLATING
2: 30μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: HDBNC-P-C-HN-ST-CA8)
3: 10μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: HDBNC-P-C-GN-ST-CA8)
PLATING
PROPRIETARY NOTE
2: 30μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: MBNC7-P-C-HN-RA-CA8)
4: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: HDBNC-P-C-GF-ST-CA8)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
3: 10μ" MIN. GOLD CENTER CONTACT
8: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: HDBNC-P-C-HF-ST-CA8)
100μ" MIN. NICKEL OUTER CONTACT
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: MBNC7-P-C-GN-RA-CA8)
TRUE 75 OHM, RF8T CABLE ASSEMBLY
DWG. NO.
NOTE: ALL CRITICAL DIMENSIONS ON HDBNC-P-C-XX-ST-CA8
THAT APPLY MUST BE VERIFIED.
RFB8T-XXXXX-XXXXXX-XXXX
NOTE: ALL CRITICAL DIMENSIONS ON MBNC7-P-C-XX-RA-CA8
THAT APPLY MUST BE VERIFIED.
F:\DWG\MISC\MKTG\RFB8T-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
BY:J. BROWNING
05/13/2010 SHEET 2 OF 2
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明