S1SS-15-28C-T-10.00-L1 [SAMTEC]
Cable Assembly,;
| 型号： | S1SS-15-28C-T-10.00-L1 |
| 厂家： | 
SAMTEC |
| 描述： | Cable Assembly, |
| 文件： | 总2页 (文件大小：242K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
REVISION D
S1SSX-XX-XXX-XX-XX.XX-LX
PINOUT
FEP CABLE OPTION
(LEAVE BLANK FOR SINGLE END ASSEMBLY)
-1: LATCH DOWN, STRAIGHT
(PIN 1 TO PIN 1, SEE FIG 2, SHT 2)
-3: LATCH UP, STRAIGHT
-T: FEP INSULATION
LEAVE BLANK FOR PVC
(SEE NOTE 8)
DO NOT
SCALE FROM
THIS PRINT
(PIN 1 TO PIN N, SEE FIG 3, SHT 2)
No OF POSITIONS
-02 THRU -20
LATCH OPTION
-L: PLASTIC LATCH
WIRE GAUGE (AWG)
-28, -30
ASSEMBLED LENGTH
(SPECIFY IN INCHES) 01.80 IN MINIMUM
COLOR CODE
-C: COLOR CODE WIRE
(SEE TABLE 2, SHT 2)
LEAVE BLANK FOR STANDARD WIRE
(SEE TABLE 1, SHT 2 )
NOT AVAILABLE WITH S1SST
PLATING SPECIFICATION
-T: BRIGHT ACID TIN TIN CONTACT AND TAIL
-GF: 3µ" GOLD CONTACT AND TAIL
SEE NOTE 6
0.05±0.04 .002±.002 (TYP)
'B'
DETAIL 'A'
SCALE 16 : 1
C-309-01-XX
6.43 .253 REF
DETAIL 'B'
SCALE 8 : 1
C
ASSEMBLED LENGTH
(SEE NOTE 4)
4.45 .175 REF
DWCX-XX-XX-XXX
(SEE TABLE 2, SHT 2)
ISS1-XX-L
5.00 .197 REF
3.17 .125 REF
'A'
1.20 .047
REF
C
(No OF POS x 1.00[.039])
C
C
(No OF POS -1) x 1.000[.0394]
C
L
+ 3.00[.118]
REF
L
L
01
1.000 .0394 (TYP)
POS 1 INDICATOR
(TOL NON-ACCUM)
FIG 1
S1SS-05-XXX-XX-XX.XX-L SHOWN
NOTES:
1.C REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: SIGNAL: 4.445N[1.0 LB].
3. PARTS TO BE PACKAGED IN BAG.
4. FOR ASSEMBLIED LENGTHS LESS THAN 13.00 IN, TOLERANCE SHALL BE
± 3.18[.125], FOR OTHER LENGTHS, TOLERANCE SHALL BE ± 2%.
5. REFER TO CRIMP SPECIFICATIONS FOR CRIMP AND STRIP DIMENSIONS,
TOLERANCES, TOOLING, AND ITS REQUIREMENTS.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
ANGLES
2
X.X: 0.3 [.01]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
X.XX: 0.13 [.005]
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
X.XXX: 0.051 [.0020]
code 55322
SHEET SCALE: 3:1
MATERIAL:
DO NOT SCALE DRAWING
6. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS IN PLACE.
7. ALL FINISHED GOODS ARE TO BE ELECTRICALLY TESTED INCLUDING HI-POT TEST
AT 1000 VOLTS DC. AFTER FINAL ELECTRICAL TEST, LABEL WITH 1 ET STAMP
ON THE BODY.
C
C
INSULATOR: NYLON, COLOR: WHITE
CONTACT: PHOS BRONZE
1MM CABLE ASSEMBLY
DWG. NO.
S1SSX-XX-XXX-XX-XX.XX-LX
8. ASSEMBLIES USING THE FEP OPTION ARE FOR CRIMP APPLICATIONS ONLY.
SHEET 1 OF
2
BY: JESSIE W
8/22/2014
F:\DWG\MISC\MKTG\S1SSX-XX-XXX-XX-XX.XX-LX-MKT.SLDDRW
REVISION D
END 1
END 2
END 1
END 2
C
ASSEMBLED LENGTH
(SEE NOTE 4)
C
ASSEMBLED LENGTH
(SEE NOTE 4)
01
01
01
01
FIG 2
FIG 3
S1SS-05-XXX-XX-XX.XX-L1 SHOWN
S1SS-05-XXX-XX-XX.XX-L3 SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
1.16 .046 REF
FIG 4
S1SS-02-XXX-XX-XX.XX-L SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(FOR POSITIONS -02 THRU -04)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
1MM CABLE ASSEMBLY
DWG. NO.
S1SSX-XX-XXX-XX-XX.XX-LX
SHEET 2 OF
2
BY: JESSIE W
8/22/2014
F:\DWG\MISC\MKTG\S1SSX-XX-XXX-XX-XX.XX-LX-MKT.SLDDRW
相关型号：
©2020 ICPDF网 联系我们和版权申明