SFM-103-02-S-D-LC-K-TR [SAMTEC]

.050'' X .050;


型号：	SFM-103-02-S-D-LC-K-TR
厂家：	SAMTEC
描述：	.050'' X .050
文件：	总4页 (文件大小：504K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

NOTES:

REVISION DV

ANY CHANGES MADE TO THIS PRINT MUST ALSO BE MADE TO THE SFC PRINT

REPRESENTS A CRITICAL DIMENSION.

2. MINIMUM PUSHOUT FORCE: .5 LB.

SFM-1XX-XX-XXX-D-XXX

3. COPLANARITY: .004[0.10] = POS 05 THRU 26

.006[0.15] = POS 27 THRU 50

OPTIONS

DO NOT

SCALE FROM

THIS PRINT

(LEAVE BLANK FOR STANDARD

No OF POSITIONS

4. TUBE ALL POSITIONS. PARTS TO BE TUBED WITH

NOTCH GOING WITH ARROW.

AND USE SFM-XX-D)

ALL POSITIONS AVAILABLE

-N: NO POLARIZATION NOTCH

(USE SFM-XX-D-XX-N)

5. PINS CAN BE ORIENTED IN ANY DIRECTION;

BOTH ROWS MUST FACE SAME WAY.

-02 THRU -50

(USE BODY: SFM-XX-D-XX-X)

-A: ALIGNMENT PIN (USE SFM-XX-D-A-X)

(SEE FIG 4, SHT 2)

6. SEE NOTCH FOR PROPER ORIENTATION.

7. MAXIMUM PIN HEIGHT VARIATION: .003[0.08]

FROM PIN TO PIN AND ROW TO ROW, MUST BE

MEASURED BETWEEN ADJACENT PINS.

-LC: LOCKING CLIP (SEE FIG 6, SHT 3 & NOTE 8)

(AVAILABLE ON ALL LEADS)

LEAD STYLE

-P: PICK AND PLACE PAD

8. DUE TO HIGH AMOUNT OF INSERTION FORCE

NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH

AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL

PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.

9. DIMENSION TO BE MEASURED AT BEND.

10. -TR OPTION ORDERS INVOLVING PARTIAL REEL QUANTITIES

MAY BE PACKAGED ACCORDING TO THE SAMTEC

PACKAGING EFFICIENCY STANDARDS (SPES) FOUND

ON WWW.SAMTEC.COM.

(SEE FIG 5, SHT 2)

-01: THROUGH HOLE

(AVAILABLE ON 5 THRU 50 POSITION ONLY)

-TR: TAPE & REEL (SEE SHT 4)

(USE CONTACT: C-44-01-XXX)

(SEE FIG 1, SHT 1)

(NOT AVAILABLE WITH -DS OPTION)

(SEE NOTE 10)

-02: SURFACE MOUNT

(USE CONTACT: C-44-02-XXX)

(SEE FIG 2, SHT 2)

-K: POLYIMIDE FILM PAD (.005[0.13] THICKNESS)

(SEE FIG 3, SHT 2) (USE K-DOT-.157-.250-.005)

-SN: SOLDER NAIL FOR .062 BOARD

(SFM-XX-D-SN AND WT-27-01-T)

(AVAILABLE WITH LEAD STYLE -02, -L2 & -T2)

(NOT AVAILABLE WITH -A & -LC)

-SN2: SOLDER NAIL FOR .093 BOARD

(SFM-XX-D-SN AND WT-27-02-T)

(AVAILABLE WITH LEAD STYLE -02, -L2 & -T2)

(NOT AVAILABLE WITH -A & -LC)

-DS: DUAL SCREW DOWN FOR .062 BOARD

(SEE FIG 8, SHT 3)

-03: STRAIGHT MODIFIED

(USE CONTACT: C-44-03-XXX)

(SEE FIG 1, SHT 1)

11.-FR OPTIONS WILL BE SHIPPED AT THE MAX QUANTITY

PER REEL, BASED ON OPTIONS SELECTED.

12. LOAD VISION TRAYS WITH PIN #1 OPPOSITE STANDARD -

AWAY FROM THE TERMINAL INDICATOR SIDE OF TRAY.

-L1: THROUGH HOLE (LOW INSERTION)

(USE CONTACT: C-61-01-XXX)

(SEE FIG 1, SHT 1)

-L2: SURFACE MOUNT (LOW INSERTION)

(USE CONTACT: C-61-02-XXX)

(SEE FIG 2, SHT 2)

*DIMENSIONS N/A FOR -N OPTION

*.145 3.68 REF

*.020 0.51 REF

*.080 2.03 REF

-L3: STRAIGHT MODIFIED (LOW INSERTION)

(USE CONTACT: C-61-03-XXX)

(SEE FIG 1, SHT 1)

.120 3.05 REF

(ONLY AVAILABLE WITH -01, -02 AND -03 LEAD

STYLE)(NOT AVAILABLE WITH OPTIONS -N, -A,

-LC, -P, -TR, -K, -SN AND SN2), (USES SFM-XX-D-DS,

CPS-RR-XX-XX-X, ACCRT-01 AND WT-27-XX-T

ALWAYS FILLED)

.050 1.27

REF

-T1: THROUGH HOLE (PHOS BRONZE)

(USE CONTACT: C-119-01-XXX)

(SEE FIG 1, SHT 1)

-T2: SURFACE MOUNT (PHOS BRONZE)

(USE CONTACT: C-119-02-XXX)

(SEE FIG 2, SHT 2)

-FR: FULL REEL QTY. TAPE & REEL

(NOT AVAILABLE WITH -DS OPTION)

(SEE NOTE 11)

BODY SPECIFICATION

-D: DOUBLE ROW

.050 1.27 REF

PLATING SPECIFICATION

-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,

(No OF POS x .050[1.27]) + .015[0.38] REF

(No OF POS x .050[1.27]) + .155[3.94] REF

MATTE TIN ON TAIL

-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

SFM-XX-D-LC-X

"A"

-H: 30µ" HEAVY GOLD IN CONTACT AREA,

3µ" GOLD ON TAIL

C-XX-01-XXX

(SEE NOTE 5)

-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

.180 4.57 REF

.015 0.38 REF

.110 2.79 REF

-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA,

TIN/LEAD (90/10+/-5%) TAIL

(ONLY AVAILABLE ON -02 OR -L2 LEADSTYLES)

-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

"A"

(SEE TABLE 1)

MAX SWAY

(EITHER DIRECTION)

-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

"B" REF

-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

.050 1.27

.005 0.13 REF

(NO OF POS x .050[1.27]) - .050[1.27] REF

MAX SWAY

(EITHER DIRECTION)

SECTION "A"-"A"

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS CONFIDENTIAL AND

PROPRIETARY INFORMATION AND ALL DESIGN,

MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS

AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,

INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE

OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR

REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY

OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS

WRITTEN CONSENT OF SAMTEC, INC.

FIG 1

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

THROUGH HOLE/STRAIGHT MODIFIED

DECIMALS

ANGLES

.XX: .01 [0.3]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

.XXX: .005 [0.13]

.XXXX: .0020 [0.051]

SHEET SCALE: 3:1

MATERIAL:

DO NOT SCALE DRAWING

DESCRIPTION:

.050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY

INSULATOR: LCP UL 94V-O, COLOR: BLACK

CONTACT: TIGER EYE: BeCu

DWG. NO.

TIGER EYE LITE: PHOSPHOR BRONZE

SFM-1XX-XX-XXX-D-XXX

BY:

JORDAN 12/11/89

SHEET 1 OF 4

F:\DWG\MISC\MKTG\SFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW

"R"

REVISION DV

(SEE NOTE)

"S"

(No OF POS x .050[1.27]) - .050[1.27] REF

(TOL ACCUM ±.005[0.13] OVER 50 POS)

(SEE NOTE)

C-XX-02-XXX

.190

+.003

-.007

+0.08

4.83

-0.18

(SEE NOTE 9)

.190 4.83

.1575±.0050 4.000±0.127

.019±.020 0.48±0.51

IN-PROCESS

-X2

FIG 3

MAX SWAY

-K: POLYIMIDE FILM PAD

(EITHER DIRECTION)

(SAME AS FIG 1, DIFFERENT AS SHOWN)

FOR HAND FILL ONLY

NOTE: DIMENSION APPLIES PRIOR

TO RE-PRESS, SEE SECTION "B"-"B"

FOR FINISHED DIMENSION

NOTE: "R" = USED MEASURED DIMENSION REF

"S" = {("R" - .1575[4.000])/2}±.020[0.51]

SFM-XX-D-LC-X

"B"

+.002

-.005

+0.051

C .185

4.70

-0.127

4°

(SEE NOTES 7 & 9)

SEE NOTE 3

SEE NOTE

SEE NOTE 7

.161 4.09 REF

SEE NOTE 7

2°

FIG 2

-X2: SURFACE MOUNT

(SAME AS FIG 1, DIFFERENT AS SHOWN)

SECTION "B"-"B"

.394 10.01

REF

PPP-02

.225 5.72

REF

"A"±.010[0.25] (SEE TABLE 2)

(NO. OF POS x .050[1.27]) + .125[3.18] REF

SFM-XX-D-A-X

.062 1.57

.050 1.27

REF

FIG 5

-P: PICK AND PLACE PAD

(PAD TO BE ORIENTED A SHOWN FOR 5-12 POSITION PARTS)

(FOR 13-50 POSITION PARTS, PAD MAY BE ORIENTED IN EITHER DIRECTION)

(SAME AS FIG 1, DIFFERENT AS SHOWN)

.050 1.27

REF

R REF

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS CONFIDENTIAL AND

(NO. OF POS x .050[1.27]) + .075[1.91] REF

PROPRIETARY INFORMATION AND ALL DESIGN,

MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS

AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,

INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE

OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR

REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY

OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS

WRITTEN CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

FIG 4

-A: ALIGNMENT PIN

DO NOT SCALE DRAWING

SHEET SCALE: 3:1

.050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY

(SAME AS FIG 1, DIFFERENT AS SHOWN)

DWG. NO.

SFM-1XX-XX-XXX-D-XXX

F:\DWG\MISC\MKTG\SFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW

BY:

JORDAN 12/11/89

SHEET 2 OF 4

REVISION DV

SFM-XX-D-LC-X

(NO OF POS x .050[1.27] + .360[9.14]

.218 5.52

REF

.065 1.65

MAX SWAY

.056 1.42 REF (EITHER DIRECTION)

MAX SWAY

(EITHER DIRECTION)

LC-05-TM

(NO OF POS x .050[1.27] + .075[1.91] REF

.010 0.25 REF

FIG 6

-LC: LOCKING CLIP

(SAME AS FIG 1, DIFFERENT AS SHOWN)

(AVAILABLE IN ALL LEADS)

CPS-RR-M2-01-X

'E'

SFM-XX-D-DS

.070 1.78

REF

.145 3.68

.335 8.50

REF

"D"

WT-27-XX-T

(NO OF POS x .050[1.27] + .600[15.24] REF

.114 2.90 REF

.012 0.30

REF

ACCRT-01

DETAIL 'E'

(NO OF POS x .050[1.27] + .185[4.70] REF

SFM-XX-D-SN

SCALE 6 : 1

FLUSH TO .005[0.13] ABOVE

"C"

FIG 8

-DS: DUAL SCREW DOWN

(SAME AS FIG 2, DIFFERENT AS SHOWN)

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS CONFIDENTIAL AND

PROPRIETARY INFORMATION AND ALL DESIGN,

"C" REF

MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS

AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,

INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE

OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR

REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY

OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS

WRITTEN CONSENT OF SAMTEC, INC.

"C"

WT-27-XX-T

.026 0.66

REF

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

(NO OF POS x .050[1.27] + .085[2.16] REF

MAX SWAY

SECTION "C"-"C"

(EITHER DIRECTION)

DO NOT SCALE DRAWING

SHEET SCALE: 3:1

.050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY

FIG 7

DWG.

^NO.SFM-1XX-XX-XXX-D-XXX

-SNX: SOLDER NAIL

(SAME AS FIG 1, DIFFERENT AS SHOWN)

SHEET 3 OF 4

F:\DWG\MISC\MKTG\SFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW

BY:

JORDAN 12/11/89

PT-1-24-13-09

REVISION DV

.630 16.00

PT-SFM004-X1-X3-D

PT-1-24-01-60

2.205 56.00

"D"

*FOR MACHINE LOADING OF TUBES FOR PARTS W/O PADS USE PT-1-24-14-09, TP-24-02

UNWINDING DIRECTION

5 POS -01 AND -03 LEAD STYLES MAY BE TUBED USING PT-1-24-15-09, TP-24-02

2 POS -X1 STYLE TO BE TUBED IN PT-1-24-15-09

(SEE NOTE 6)

PACKAGING VIEW

PACKAGE PARTS IN TUBES AS SHOWN (SEE NOTE 4)

F:\DWG\MISC\MKTG\SFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW

SECTION "D"-"D"

SCALE 2 : 1

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS CONFIDENTIAL AND

PROPRIETARY INFORMATION AND ALL DESIGN,

MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS

AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,

INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE

OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR

REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY

OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS

WRITTEN CONSENT OF SAMTEC, INC.

PACKAGING VIEW

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

-TR: TAPE AND REEL

DO NOT SCALE DRAWING

SHEET SCALE: 1.5:1

.050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY

DWG. NO.

SFM-1XX-XX-XXX-D-XXX

BY:

JORDAN 12/11/89

SHEET 4 OF 4

SFM-103-02-S-D-LC-K-TR [SAMTEC]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E