FMET-21510 [SANKEN]
Rectifier Diode, Schottky, 1 Phase, 2 Element, 7.5A, 100V V(RRM), Silicon, TO-220AB, TO-220F, 3 PIN;型号: | FMET-21510 |
厂家: | SANKEN ELECTRIC |
描述: | Rectifier Diode, Schottky, 1 Phase, 2 Element, 7.5A, 100V V(RRM), Silicon, TO-220AB, TO-220F, 3 PIN 局域网 功效 二极管 |
文件: | 总6页 (文件大小:344K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VRSM = 100 V, IF(AV) = 15 A
Trench Schottky Diode
Preliminary
FMET-21510
Features
Package
FMET-21510 is 100 V / 15 A Schottky Diode of the
Trench structure and has the improved characteristics of
VF and IR. These characteristics realize the improving of
power supply efficiency, and the high frequency system.
TO220F-3L
● VRM------------------------------------------------------ 100 V
● IF(AV)--------------------------------------------------------15A
● VF (125 °C, IF = 3.5 A)------------------------- 0.57 V typ.
Applications
(1) Anode
(2) Cathode
(3) Anode
The high speed switching applications as follows:
● DC-DC Converter
● Adapter
(1)(2)(3)
(1)
(3)
(2)
Not to scale
Absolute Maximum Ratings
Unless otherwise specified, Tj is 25 °C
Notes
Parameter
Symbol
VRSM
VRM
Rating
100
Unit
V
Peak Repetitive Reverse Voltage
Repetitive Reverse Voltage
Average Forward Current
100
V
IF(AV)
15
A
10 ms
Half sinewave, one shot
Surge Forward Current
IFSM
100
A
Junction Temperature
Storage Temperature
Tj
−40 to 150
−40 to 150
°C
°C
Tstg
Electrical Characteristics
Unless otherwise specified, Tj is 25 °C
Parameter
Symbol
Test Conditions
IF = 3.5 A
IF = 7.5 A
Min.
Typ.
Max.
−
Unit
V
−
−
−
−
−
0.65
0.81
0.57
0.67
0.3
Forward Voltage Drop
VF
0.85
−
V
Tj = 125 °C, IF = 3.5 A
Tj = 125 °C, IF = 7.5 A
VR = VRM
V
Forward Voltage Drop
Under High Temperature
H・VF
−
V
Reverse Leakage Current
IR
50
µA
Reverse Leakage Current
Under High Temperature
VR = VRM, Tj = 150 °C
−
−
3.0
25
mA
H・IR
Rth(j-c)
Thermal Resistance*
−
4.0
°C/W
* Rth(j-c) is thermal resistance between junction and case. Case temperature (TC) is measured at the under of the screw
hole of case.
FMET-21510-DSE Rev.0.2
Apr. 12, 2016
SANKEN ELECTRIC CO.,LTD.
http://www.sanken-ele.co.jp/en
1
Preliminary
FMET-21510
Performance Curves
100
10
TJ = 150°C
TJ = 125°C
TJ = 100°C
1
TJ = 25°C
0.1
0
0.2
0.4
0.6
0.8
1
1.2
Forward Voltage Drop, VF (V)
Figure 1 Typical Forward Characteristics
1.0E-02
1.0E-03
1.0E-04
1.0E-05
1.0E-06
TJ = 150°C
TJ = 125°C
TJ = 100°C
TJ = 25°C
1.0E-07
0
20
40
60
80
100
Reverse Volatage, VR (V)
Figure 2 Typical Reverse Leakage Current Characteristics
FMET-21510-DSE Rev.0.2
Apr. 12, 2016
SANKEN ELECTRIC CO.,LTD.
2
Preliminary
FMET-21510
Power Dissipation Curves
20
Tj = 150 °C
t/T=1/6
t
T
15
t/T=1/3,sinewave
t/T=1/2
10
5
DC
0
0
3
6
9
12
15
Average Forward Current, IF(AV) (A)
Figure 3 Forward Power Dissipation, PF vs. Average Forward Current, IF(AV)
5
4
3
2
1
0
Tj = 150 °C
1-t/T=5/6
t
T
1-t/T=2/3
1-t/T=1/2
sinewave
0
20
40
60
80
100
Reverse Voltage , VR (V)
Figure 4 Reverse Power Dissipation, PR vs. Reverse Voltage , VR
FMET-21510-DSE Rev.0.2
Apr. 12, 2016
SANKEN ELECTRIC CO.,LTD.
3
Preliminary
FMET-21510
Derating Curves
VR = 0 (V)
15
12
9
t/T=1/2
DC
t/T=1/6
r/T=1/3 sinewave
6
Tj = 150 °C
3
t
T
0
50
100
150
Case Temperature (°C)
Figure 5 Average Rectified Forward Current, IF(AV) vs. Case Temperature
VR = 100 (V)
15
12
9
sinewave
DC
t/T=1/6
t/T=1/3
6
Tj = 150 °C
t/T=1/2
3
t
T
0
50
100
Case Temperature (°C)
Figure 6 Average Rectified Forward Current, IF(AV) vs. Case Temperature
150
FMET-21510-DSE Rev.0.2
Apr. 12, 2016
SANKEN ELECTRIC CO.,LTD.
4
Preliminary
FMET-21510
Package Outline
TO220F-3L
NOTES:
1) Dimension is in millimeters.
2) Pin treatment Pb-free. Device composition compliant with the RoHS directive.
Marking Diagram
ET1510
Y M D D
Part Number
Lot Number:
Y is the last digit of the year of manufacture (0 to 9)
M is the month of the year (1 to 9, O, N or D)
DD is the day of the month (01 to 31)
1
2
3
FMET-21510-DSE Rev.0.2
Apr. 12, 2016
SANKEN ELECTRIC CO.,LTD.
5
Preliminary
FMET-21510
IMPORTANT NOTES
● All data, illustrations, graphs, tables and any other information included in this document as to Sanken’s products listed herein (the
“Sanken Products”) are current as of the date this document is issued. All contents in this document are subject to any change
without notice due to improvement of the Sanken Products, etc. Please make sure to confirm with a Sanken sales representative
that the contents set forth in this document reflect the latest revisions before use.
● The Sanken Products are intended for use as components of general purpose electronic equipment or apparatus (such as home
appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Prior to use of the Sanken Products,
please put your signature, or affix your name and seal, on the specification documents of the Sanken Products and return them to
Sanken. When considering use of the Sanken Products for any applications that require higher reliability (such as transportation
equipment and its control systems, traffic signal control systems or equipment, disaster/crime alarm systems, various safety
devices, etc.), you must contact a Sanken sales representative to discuss the suitability of such use and put your signature, or affix
your name and seal, on the specification documents of the Sanken Products and return them to Sanken, prior to the use of the
Sanken Products. The Sanken Products are not intended for use in any applications that require extremely high reliability such as:
aerospace equipment; nuclear power control systems; and medical equipment or systems, whose failure or malfunction may result
in death or serious injury to people, i.e., medical devices in Class III or a higher class as defined by relevant laws of Japan
(collectively, the “Specific Applications”). Sanken assumes no liability or responsibility whatsoever for any and all damages and
losses that may be suffered by you, users or any third party, resulting from the use of the Sanken Products in the Specific
Applications or in manner not in compliance with the instructions set forth herein.
● In the event of using the Sanken Products by either (i) combining other products or materials therewith or (ii) physically,
chemically or otherwise processing or treating the same, you must duly consider all possible risks that may result from all such
uses in advance and proceed therewith at your own responsibility.
● Although Sanken is making efforts to enhance the quality and reliability of its products, it is impossible to completely avoid the
occurrence of any failure or defect in semiconductor products at a certain rate. You must take, at your own responsibility,
preventative measures including using a sufficient safety design and confirming safety of any equipment or systems in/for which
the Sanken Products are used, upon due consideration of a failure occurrence rate or derating, etc., in order not to cause any human
injury or death, fire accident or social harm which may result from any failure or malfunction of the Sanken Products. Please refer
to the relevant specification documents and Sanken’s official website in relation to derating.
● No anti-radioactive ray design has been adopted for the Sanken Products.
● No contents in this document can be transcribed or copied without Sanken’s prior written consent.
● The circuit constant, operation examples, circuit examples, pattern layout examples, design examples, recommended examples, all
information and evaluation results based thereon, etc., described in this document are presented for the sole purpose of reference of
use of the Sanken Products and Sanken assumes no responsibility whatsoever for any and all damages and losses that may be
suffered by you, users or any third party, or any possible infringement of any and all property rights including intellectual property
rights and any other rights of you, users or any third party, resulting from the foregoing.
● All technical information described in this document (the “Technical Information”) is presented for the sole purpose of reference
of use of the Sanken Products and no license, express, implied or otherwise, is granted hereby under any intellectual property
rights or any other rights of Sanken.
● Unless otherwise agreed in writing between Sanken and you, Sanken makes no warranty of any kind, whether express or implied,
including, without limitation, any warranty (i) as to the quality or performance of the Sanken Products (such as implied warranty
of merchantability, or implied warranty of fitness for a particular purpose or special environment), (ii) that any Sanken Product is
delivered free of claims of third parties by way of infringement or the like, (iii) that may arise from course of performance, course
of dealing or usage of trade, and (iv) as to any information contained in this document (including its accuracy, usefulness, or
reliability).
● In the event of using the Sanken Products, you must use the same after carefully examining all applicable environmental laws and
regulations that regulate the inclusion or use of any particular controlled substances, including, but not limited to, the EU RoHS
Directive, so as to be in strict compliance with such applicable laws and regulations.
● You must not use the Sanken Products or the Technical Information for the purpose of any military applications or use, including
but not limited to the development of weapons of mass destruction. In the event of exporting the Sanken Products or the Technical
Information, or providing them for non-residents, you must comply with all applicable export control laws and regulations in each
country including the U.S. Export Administration Regulations (EAR) and the Foreign Exchange and Foreign Trade Act of Japan,
and follow the procedures required by such applicable laws and regulations.
● Sanken assumes no responsibility for any troubles, which may occur during the transportation of the Sanken Products including
the falling thereof, out of Sanken’s distribution network.
● Although Sanken has prepared this document with its due care to pursue the accuracy thereof, Sanken does not warrant that it is
error free and Sanken assumes no liability whatsoever for any and all damages and losses which may be suffered by you resulting
from any possible errors or omissions in connection with the contents included herein.
● Please refer to the relevant specification documents in relation to particular precautions when using the Sanken Products, and refer
to our official website in relation to general instructions and directions for using the Sanken Products.
DSGN-CEZ-16001
FMET-21510-DSE Rev.0.2
Apr. 12, 2016
SANKEN ELECTRIC CO.,LTD.
6
相关型号:
FMET-21515
Rectifier Diode, Schottky, 1 Phase, 15A, 150V V(RRM), Silicon, TO-220AB, TO-220F, 3 PIN
SANKEN
FMET-23010
Rectifier Diode, Schottky, 1 Phase, 2 Element, 15A, 100V V(RRM), Silicon, TO-220AB, TO-220F, 3 PIN
SANKEN
©2020 ICPDF网 联系我们和版权申明