FMET-23010 [SANKEN]

Rectifier Diode, Schottky, 1 Phase, 2 Element, 15A, 100V V(RRM), Silicon, TO-220AB, TO-220F, 3 PIN;


型号：	FMET-23010
厂家：	SANKEN ELECTRIC
描述：	Rectifier Diode, Schottky, 1 Phase, 2 Element, 15A, 100V V(RRM), Silicon, TO-220AB, TO-220F, 3 PIN 局域网功效二极管
文件：	总6页 (文件大小：293K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

V_RSM= 100 V, I_F(AV)= 30 A

Trench Schottky Diode

FMET-23010

Data Sheet

Description

Package

The FMET-23010 is a 100 V, 30 A, Schottky diode of

trench structure and has the improved characteristics of

V_Fand I_R. These characteristics realize the improving of

power supply efficiency, and the high frequency system.

TO220F-3L

Features

● V_RM------------------------------------------------------ 100 V

● I_F(AV)-------------------------------------------------------30 A

● V_F(125 °C, I_F= 7.5 A)--------------------------0.57 V typ

● RoHS Compliant

Application

(1)(2)(3)

(2)

The high speed switching applications as follows:

● DC-DC Converter

● Adapter

(1)

(3)

(1) Anode

(2) Cathode

(3) Anode

Not to scale

FMET-23010-DSE Rev.1.0

Oct. 28, 2016

SANKEN ELECTRIC CO., LTD.

http://www.sanken-ele.co.jp/en/

FMET-23010

Absolute Maximum Ratings

Unless otherwise specified, T_A= 25 °C

Parameter

Peak Repetitive Reverse Voltage⁽¹⁾

Repetitive Reverse Voltage⁽¹⁾

Average Forward Current⁽²⁾

Symbol

V_RSM

V_RM

Rating

100

Unit

Remarks

100

I_F(AV)

Half cycle sine wave,

positive side,

Surge Forward Current⁽¹⁾

I_FSM

120

10 ms, one shot

Junction Temperature

Storage Temperature

T_J

−40 to 150

°C

T_STG

Electrical Characteristics

Unless otherwise specified, T_A= 25 °C

Parameter

Symbol

Conditions

Min.

—

Typ.

0.67

0.81

0.57

0.67

0.6

Max.

Unit

Remarks

I_F= 7.5 A

—

Forward Voltage Drop⁽¹⁾

V_F

I_F= 15 A

—

0.85

—

T_J= 125 °C, I_F= 7.5 A

T_J= 125 °C, I_F= 15 A

V_R= V_RM

—

Forward

Voltage

Drop

H∙V_F

Under High Temperature⁽¹⁾

Reverse Leakage Current⁽¹⁾

—

100

—

I_R

—

µA

Reverse Leakage Current

H∙I_R

V_R= V_RM, T_J= 150 °C

—

6.0

Under High Temperature⁽¹⁾

Thermal Resistance⁽³⁾

R_th(J-C)

—

4.0

°C/W

⁽¹⁾The rating of one chip.

⁽²⁾The rating of two chips. The rating of one chip is 15A.

(3)

th(J-C)

is thermal resistance between junction and case. Case temperature (T_C) is measured at the under of the screw

hole of case.

FMET-23010-DSE Rev.1.0

Oct. 28, 2016

SANKEN ELECTRIC CO., LTD.

http://www.sanken-ele.co.jp/en/

FMET-23010

Rating and Characteristics Curves

Sine wave

t/T = 1/3

t/T = 1/2

t /T = 1/6

t/T = 1/6

t/T = 1/3

t/T = 1/2

Sine wave

T_J= 150 °C

100

150

100

150

Case Temperature (°C)

Figure 1. I_F(AV)vs. Case Temperature Curves

V_R= 0 V

Figure 2. I_F(AV)vs. Case Temperature Curves

V_R= 100 V

1E-02

100

T_J= 150 °C

1E-03

T_J= 125 °C

T_J= 150 °C

1E-04

1E-05

1E-06

1E-07

T_J= 100 °C

T_J= 125 °C

T_J= 100 °C

T_J= 25 °C

0.1

Reverse Volatage, V_R(V)

100

0.5

Forward Voltage Drop, V_F(V)

Figure 3. I_F－V_FTypical Characteristics

Figure 4. I_R－V_RTypical Characteristics

FMET-23010-DSE Rev.1.0

Oct. 28, 2016

SANKEN ELECTRIC CO., LTD.

http://www.sanken-ele.co.jp/en/

FMET-23010

Physical Dimensions

● TO220F-3L

NOTES:

- Dimensions in millimeters

- Bare lead frame: Pb-free (RoHS compliant)

- When soldering the products, be sure to minimize the working time, within the following limits:

Flow: 260 ± 5 °C / 10 ± 1 s, 2 times

Soldering Iron: 380 ± 10 °C / 3.5 ± 0.5 s, 1 time (Soldering should be at a distance of at least 1.5 mm from the

body of the products.)

The recommended screw torque for TO220F-3L: 0.490 to 0.686 N∙m (5 to 7 kgf∙cm)

FMET-23010-DSE Rev.1.0

Oct. 28, 2016

SANKEN ELECTRIC CO., LTD.

http://www.sanken-ele.co.jp/en/

FMET-23010

Marking Diagram

Specific Device Code (See Table 1)

Y M D D

Lot Number:

Y is the last digit of the year of manufacture (0 to 9)

M is the month of the year (1 to 9, O, N or D)

DD is the day of the month (01 to 31)

Table 1 Specific Device Code

Specific Device Code

ET3010

Part Number

FMET-23010

FMET-23010-DSE Rev.1.0

Oct. 28, 2016

SANKEN ELECTRIC CO., LTD.

http://www.sanken-ele.co.jp/en/

FMET-23010

Important Notes

● All data, illustrations, graphs, tables and any other information included in this document as to Sanken’s products listed herein (the

“Sanken Products”) are current as of the date this document is issued. All contents in this document are subject to any change

without notice due to improvement of the Sanken Products, etc. Please make sure to confirm with a Sanken sales representative

that the contents set forth in this document reflect the latest revisions before use.

● The Sanken Products are intended for use as components of general purpose electronic equipment or apparatus (such as home

appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Prior to use of the Sanken Products,

please put your signature, or affix your name and seal, on the specification documents of the Sanken Products and return them to

Sanken. When considering use of the Sanken Products for any applications that require higher reliability (such as transportation

equipment and its control systems, traffic signal control systems or equipment, disaster/crime alarm systems, various safety

devices, etc.), you must contact a Sanken sales representative to discuss the suitability of such use and put your signature, or affix

your name and seal, on the specification documents of the Sanken Products and return them to Sanken, prior to the use of the

Sanken Products. The Sanken Products are not intended for use in any applications that require extremely high reliability such as:

aerospace equipment; nuclear power control systems; and medical equipment or systems, whose failure or malfunction may result

in death or serious injury to people, i.e., medical devices in Class III or a higher class as defined by relevant laws of Japan

(collectively, the “Specific Applications”). Sanken assumes no liability or responsibility whatsoever for any and all damages and

losses that may be suffered by you, users or any third party, resulting from the use of the Sanken Products in the Specific

Applications or in manner not in compliance with the instructions set forth herein.

● In the event of using the Sanken Products by either (i) combining other products or materials therewith or (ii) physically,

chemically or otherwise processing or treating the same, you must duly consider all possible risks that may result from all such

uses in advance and proceed therewith at your own responsibility.

● Although Sanken is making efforts to enhance the quality and reliability of its products, it is impossible to completely avoid the

occurrence of any failure or defect in semiconductor products at a certain rate. You must take, at your own responsibility,

preventative measures including using a sufficient safety design and confirming safety of any equipment or systems in/for which

the Sanken Products are used, upon due consideration of a failure occurrence rate or derating, etc., in order not to cause any human

injury or death, fire accident or social harm which may result from any failure or malfunction of the Sanken Products. Please refer

to the relevant specification documents and Sanken’s official website in relation to derating.

● No anti-radioactive ray design has been adopted for the Sanken Products.

● No contents in this document can be transcribed or copied without Sanken’s prior written consent.

● The circuit constant, operation examples, circuit examples, pattern layout examples, design examples, recommended examples, all

information and evaluation results based thereon, etc., described in this document are presented for the sole purpose of reference of

use of the Sanken Products and Sanken assumes no responsibility whatsoever for any and all damages and losses that may be

suffered by you, users or any third party, or any possible infringement of any and all property rights including intellectual property

rights and any other rights of you, users or any third party, resulting from the foregoing.

● All technical information described in this document (the “Technical Information”) is presented for the sole purpose of reference

of use of the Sanken Products and no license, express, implied or otherwise, is granted hereby under any intellectual property

rights or any other rights of Sanken.

● Unless otherwise agreed in writing between Sanken and you, Sanken makes no warranty of any kind, whether express or implied,

including, without limitation, any warranty (i) as to the quality or performance of the Sanken Products (such as implied warranty

of merchantability, or implied warranty of fitness for a particular purpose or special environment), (ii) that any Sanken Product is

delivered free of claims of third parties by way of infringement or the like, (iii) that may arise from course of performance, course

of dealing or usage of trade, and (iv) as to any information contained in this document (including its accuracy, usefulness, or

reliability).

● In the event of using the Sanken Products, you must use the same after carefully examining all applicable environmental laws and

regulations that regulate the inclusion or use of any particular controlled substances, including, but not limited to, the EU RoHS

Directive, so as to be in strict compliance with such applicable laws and regulations.

● You must not use the Sanken Products or the Technical Information for the purpose of any military applications or use, including

but not limited to the development of weapons of mass destruction. In the event of exporting the Sanken Products or the Technical

Information, or providing them for non-residents, you must comply with all applicable export control laws and regulations in each

country including the U.S. Export Administration Regulations (EAR) and the Foreign Exchange and Foreign Trade Act of Japan,

and follow the procedures required by such applicable laws and regulations.

● Sanken assumes no responsibility for any troubles, which may occur during the transportation of the Sanken Products including

the falling thereof, out of Sanken’s distribution network.

● Although Sanken has prepared this document with its due care to pursue the accuracy thereof, Sanken does not warrant that it is

error free and Sanken assumes no liability whatsoever for any and all damages and losses which may be suffered by you resulting

from any possible errors or omissions in connection with the contents included herein.

● Please refer to the relevant specification documents in relation to particular precautions when using the Sanken Products, and refer

to our official website in relation to general instructions and directions for using the Sanken Products.

● All rights and title in and to any specific trademark or tradename belong to Sanken or such original right holder(s).

DSGN-CEZ-16002

FMET-23010-DSE Rev.1.0

Oct. 28, 2016

SANKEN ELECTRIC CO., LTD.

http://www.sanken-ele.co.jp/en/

FMET-23010 [SANKEN]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E