LB11851M [SANYO]
Monolithic Digital IC Microprocessor Fan Motor Interface Driver; 单片数字集成电路微处理器风扇电机驱动器的接口
| 型号： | LB11851M |
| 厂家： | 
SANYO SEMICON DEVICE |
| 描述： | Monolithic Digital IC Microprocessor Fan Motor Interface Driver |
| 文件： | 总6页 (文件大小：74K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Ordering number : ENA0673A
Monolithic Digital IC
Microprocessor Fan Motor
Interface Driver
LB11851M
Overview
The LB11851M provides an interface between a microcontroller motor control signal and external MOS transistors. This
device can implement a microprocessor fan driver with a minimal number of external components. The LB11851M is
optimal for server and personal computer microprocessor fan drive in response to temperature or other external signals
when high precision and high air flow are required.
Features
• Fan motor interface driver function (FGIN)
⇒ This IC accepts a signal from a microcontroller and interfaces to external power transistors (PMOS and NMOS) to
provide high-efficiency low-power single-phase full-wave drive.
• Variable speed input pin (PWMIN)
⇒ PMOS side PWM control
NMOS side current regeneration using slow decay is used to achieve quite high-speed control.
• Built-in kickback absorption circuit (OUT1P/2P)
⇒ This circuit absorbs the kickback current that is generated at phase switching or power on/off to achieve smooth
current regeneration and protect the external transistors against destruction or degradation.
• Built-in current limiter circuit (SENSE)
⇒ This circuit implements a chopper-type current limiting control that operates at startup and during lock protection
mode.
The current detection voltage is set to a fixed 0.2V internally.
• Built-in microcontroller power supply (5VREG)
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer
's products or
equipment.
41807 MS PC 20070417-S00001 / 22107 MS PC 20070122-S00004 No.A0673-1/6
LB11851M
Specifications
Allowable Operating Ranges at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
V
Maximum supply voltage
V
max
18
20
20
18
20
0.8
CC
OUTN pin maximum output current
OUTP pin maximum output current
OUT pin voltage handling capacity
5VREG maximum output current
Allowable power dissipation
IOUTN max
mA
mA
V
IOUTP max
VOUT max
I5VREG max
Pd max
mA
W
When mounted on the specified circuit
board *1
Independent IC
0.3
-30 to +95
-55 to +150
W
°C
°C
Operating temperature
Storage temperature
Topr
Tstg
*2
*1 Specified substrate : 114.3mm × 76.1mm × 1.6mm, glass epoxy board.
*2 Do not exceed Tj max = 150°C
Recommended Operating Ranges at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
V
Supply voltage - V
V
6 to 16
2.1 to 5
0 to 0.4
2.1 to 5
0 to 0.3
0 to 5
CC
CC
PWM high-level input voltage range
VPWMINH
VPWMINL
VFGINH
VFGINL
V
PWM low-level input voltage range
FGIN high-level input voltage range
FGIN low-level input voltage range
SENSE input voltage range
V
V
V
VSENop
V
Electrical Characteristics at Ta = 25°C, V
= 12V
DD
Ratings
typ
Parameter
Symbol
Conditions
Unit
min
3.5
max
6.5
Circuit current
I
1
With no load
5VREG = 10mA
5
mA
V
CC
5VREG voltage
5VREG
VSENth
FGIhi
4.8
0.15
60
5
0.19
80
5.2
SENSE pin detection voltage
FGIN high-level input current
FGIN low-level input current
PWMIN high-level current
PWMIN low-level current
0.23
100
-15
55
V
V
V
V
V
I
= 3V
= 0V
= 3V
= 0V
µA
µA
µA
µA
V
IN
IN
IN
IN
FGIlow
PWMIhi
PWMIlow
-27
35
-21
45
-27
10
-21
11
-14
11.9
OUT1P, OUT2P high-level output
voltage
V
12PH
= 10mA *2
= 10mA *2
= 10mA *1
= 10mA *1
O
O
OUT1P, OUT2P low-level output
voltage
V
V
12PL
I
I
I
3
9
4
10
1
5
11.9
2
V
V
V
O
O
O
O
OUT1N, OUT2N high-level output
voltage
12NH
O
OUT1N, OUT2N low-level output
voltage
V
12NL
0.1
O
*1 : There is a built-in 100Ω gate protection resistor.
*2 : There is a built-in 300Ω gate protection resistor.
No.A0673-2/6
LB11851M
Truth Table
FGIN
PWMIN
SENSE
L
OUT1P
OUT1N
OUT2P
OUT2N
Mode
L
H
L
L
H
L
L
L
H
L
H
L
H
L
OUT1 → 2 drive
OUT2 → 1 drive
H
H
H
H
H
L
H
H
H
H
H
L
Regeneration mode
(low side regeneration)
H
L
H
L
H
H
L
Current limiter
(low side regeneration)
H
H
Note 1 : For the SENSE pin, the "H" state is 0.2V or higher.
Note 2 : The IC goes to regeneration mode (no motor drive applied) when the microcontroller is reset (the output high-impedance state).
Package Dimensions
unit : mm (typ)
3086B
Pd max -- Ta
Specified circuit board : 114.3×76.1×1.6mm3
1.0
0.8
0.6
When mounted on the thermal
resistance evaluation board
glass epoxy board
5.0
10
6
0.4
0.3
0.2
0.35
Independent IC
5
1
0.15
0.13
0
-30
0
30
60
90
120
(0.5)
0.35
1.0
Ambient temperature, Ta -- °C
SANYO : MFP10S(225mil)
Pin Assignment
OUT2P
OUT2N
5VREG
FGIN
1
2
3
4
5
10 OUT1P
9
8
7
6
OUT1N
V
LB11851M
CC
SENSE
GND
PWMIN
Top View
No.A0673-3/6
LB11851M
1. Power supply (V
and V ) and ground
M
CC
The wiring is separated into the control IC side (V
line) and the motor output side (V line) by the diode DI, which
CC
M
protects the IC from destruction on reverse connection. The application circuit uses 1µF capacitors to prevent line
oscillation when kickback occurs. Similarly, 1µF capacitors are also used on the V
stabilization.
line for power supply line
CC
2. PWMIN
The LB11851M accepts an open-drain output signal from the microcontroller with this pin and controls the on/off
states of the PMOS transistor (OUT1P and OUT2P) outputs accordingly. A constant-current bias is provided from
5VREG internally to the IC.
3. FGIN
The LB11851M accepts a CMOS output from the microcontroller with this pin and determines the drive phase output
(OUT1P, OUT2P, OUT1N, or OUT2N).
4. 5VREG
This is the power supply for the microcontroller, Hall effect sensors, and other circuits. A capacitor with a value of
1µF is used for output stabilization. This pin has an output current capacity of 20mA.
5. SENSE
A sensing resistor is used for current detection. If the SENSE pin voltage exceeds 0.2V, the PMOS transistors are
turned off and only low side regeneration is performed.
Block Diagram
V
CC
OUT1N
OUT1P
5VREG
20kΩ
300Ω
5VREG
100Ω
20kΩ
5VREG
Controller
PWMIN
FGIN
5VREG
OUT2N
OUT2P
20kΩ
300Ω
100Ω
20kΩ
SENSE
GND
No.A0673-4/6
LB11851M
Application Circuit Example (12V)
V
=Line
M
C=1µF
C=1µF
R1=1kΩ
1P
1N
2P
2N
RF
V
CC
C=1µF
5VREG
SENSE
V
DD
OUT2P
OUT2N
2P
2N
PWMOUT
FGOUT
PWMIN
FGIN
-
H
IN
+
IN
Microcontroller
OUT1P
OUT1N
1P
1N
PWMIN
INPUT
A/D
GND
V
SS
FG
No.A0673-5/6
LB11851M
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of April, 2007. Specifications and information herein are subject
to change without notice.
PS No.A0673-6/6
相关型号：
LB11852FV
Monolithic Digital IC For Fan Motor Single-phase Full-wave Pre-driver with Speed Control Function
SANYO
©2020 ICPDF网 联系我们和版权申明