STK4038II [SANYO]

AF Power Amplifier (Split Power Supply) (60 W min, THD = 0.4%); 自动对焦功率放大器(分体式电源) ( 60瓦分钟, THD = 0.4 % )
STK4038II
型号: STK4038II
厂家: SANYO SEMICON DEVICE    SANYO SEMICON DEVICE
描述:

AF Power Amplifier (Split Power Supply) (60 W min, THD = 0.4%)
自动对焦功率放大器(分体式电源) ( 60瓦分钟, THD = 0.4 % )

商用集成电路 放大器 功率放大器 局域网
文件: 总3页 (文件大小:49K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Ordering number : EN4546A  
Thick Film Hybrid IC  
STK4038 II  
AF Power Amplifier (Split Power Supply)  
(60 W min, THD = 0.4%)  
Features  
Package Dimensions  
• Compact packaging supports slimmer set designs  
unit: mm  
• Series designed for 20 up to 200 W and pin-  
compatibility  
4033  
[STK4038II]  
• Simpler heat sink design facilitates thermal design of  
slim stereo sets  
• The pulse noises associated with turning the power on  
and off have been reduced by the adoption of fixed  
current circuits  
• Supports addition of electronic circuits for thermal  
shutdown and load-short protection circuit as well as  
pop noise muting which occurs when the power  
supply switch is turned on and off  
Specifications  
Maximum Ratings at Ta = 25°C  
Parameter  
Symbol  
V max  
CC  
Condition  
Rating  
±57  
Unit  
V
Maximum supply voltage  
Thermal resistance  
θj-c  
1.4  
150  
125  
°C/W  
°C  
Junction temperature  
Tj  
Tc  
Operating substrate temperature  
Storage temperature  
°C  
Tstg  
–30 to +125  
2
°C  
Available time for load shorted  
t *1  
V
= ±38 V, R = 8 , f = 50 Hz, P = 60 W  
s
S
CC  
L
O
Recommended Operating Conditions at Ta = 25°C  
Parameter  
Recommended supply voltage  
Load resistance  
Symbol  
Condition  
Rating  
±38  
8
Unit  
V
V
CC  
R
L
Operating Characteristics at Ta = 25°C, V = ±38 V, R = 8 , VG = 40 dB, Rg = 600 , R (non-inductive)  
CC  
L
L
Rating  
Parameter  
Quiescent current  
Symbol  
Condition  
Unit  
min  
10  
typ  
max  
50  
I
V
= ±45.5 V  
CC  
20  
mA  
W
CCO  
P
P
(1)  
(2)  
THD = 0.4%, f = 20 Hz to 20 kHz  
60  
O
Output power  
V
P
= ±32.5 V, THD = 1.0%, R = 4 , f = 1 kHz  
60  
W
O
CC  
L
Total harmonic distortion  
Frequency response  
THD  
f , f  
= 1.0 W, f = 1kHz  
0.3  
%
O
O
O
+0  
–3  
P
= 1.0 W,  
dB  
20 to 50k  
55  
Hz  
L
H
Input resistance  
Output noise voltage  
Neutral voltage  
r
P
V
V
= 1.0 W, f = 1kHz  
kΩ  
mVrms  
mV  
i
V
*2  
= ±45.5 V, Rg = 10 kΩ  
1.2  
NO  
V
CC  
CC  
= ±45.5 V  
–70  
0
+70  
N
Note: Use rated power supply for test unless otherwise specified.  
1. Use the transformer power supply shown on the next page when measuring the available time for load shorted and the output noise voltage.  
2. Output noise voltage represents the peak value on the rms scale (VTVM). The noise voltage waveform does not include the pulse noise.  
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters  
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN  
N3096HA (OT)/83093YO 5-2308 No. 4546-1/3  
STK4038 II  
Specified Transformer Power Supply  
(RP-25 equivalent)  
Equivalent Circuit  
Application Circuit: 60 W min AF Power Amplifier  
No. 4546-2/3  
STK4038 II  
No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace  
equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of  
which may directly or indirectly cause injury, death or property loss.  
Anyone purchasing any products described or contained herein for an above-mentioned use shall:  
Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and  
distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all  
damages, cost and expenses associated with such use:  
Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on  
SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees  
jointly or severally.  
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for  
volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied  
regarding its use or any infringements of intellectual property rights or other rights of third parties.  
This catalog provides information as of November, 1996. Specifications and information herein are subject to  
change without notice.  
No. 4546-3/3  

相关型号:

STK4038V

Features of the IMST Hybird ICs
ETC

STK4038X

AF Power Amplifier (Split Power Supply) (60 W min, THD = 0.008%)
SANYO

STK4038XI

AF Power Amplifier (Split Power Supply) (60 W min, THD = 0.008%)
SANYO

STK4038XL

Features of the IMST Hybird ICs
ETC

STK404-050

1 CH AB AUDIO POWER IC
SANYO

STK404-070

1 CH AB AUDIO POWER IC
SANYO

STK404-070N-E

1ch class-AB Audio Power IC 60W
SANYO

STK404-070N-E

Audio Power Amplifier, Class AB, 1-Channel
ONSEMI

STK404-070S

IC,AUDIO AMPLIFIER,SINGLE,HYBRID,SIP,10PIN,PLASTIC
ONSEMI

STK404-090

1 CH AB AUDIO POWER IC
SANYO

STK404-090S

STK404-090S
SANYO

STK404-100

1 CH AB AUDIO POWER IC
SANYO