6051.2008 [SCHURTER]
Mains Power Connector, 10A, 250VAC, Female, Plug, ROHS COMPLIANT;
| 型号： | 6051.2008 |
| 厂家： | 
SCHURTER INC. |
| 描述： | Mains Power Connector, 10A, 250VAC, Female, Plug, ROHS COMPLIANT 连接器 电源连接器 |
| 文件： | 总3页 (文件大小：336K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Cord Sets
6051.2008
https://www.schurter.com /PG07
UK Power Supply Cord with IEC Connector C13, V-Lock, angled
C13
BS 1363
See below:
Approvals and Compliances
70° C
Description
- Power Cord
- Protection class I , Pin temperature 70 °C ,
- with V-Lock interlocking system
- with fuse 13 A
Technical Data
Ratings IEC
10A / 250VAC; 50Hz
appliance inlet/-outlet
C13 acc. to 60320-2-2
(for cold conditions) pin-temperature 70
°C, 10A, Protection Class I
Dielectric Strength
> 2kVDC between L-N
> 2kVAC between L/N-PE
(1min/50Hz)
Allowable Operation Tempe-
rature
-25°C to 70°C
IP-Protection
Insulation cover
from front side IP 20 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
moulded
Terminal
Material: Housing
PVC, black
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: 6051.2008
Approval Logo
Certificates
Certification Body
Description
ASTA Approvals
ASTA
ASTA Test Certificates provide authoritative objective evidence that the
component is compliant to relevant safety standards. The certificate can
be used for supporting technical files related to CE Marking for the Euro-
pean Union.
Product standards
Product standards that are referenced
Organization
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Designed according to
60320-2-2
Appliance couplers for household and similar general purposes
Application standards
Application standards where the product can be used
Organization
Design
Standard
Description
Designed for applications acc.
IEC/UL 60950
IEC 60950-1 includes the basic requirements for the safety of information
technologyequipment.
1
Connectors
Cord Sets
6051.2008
https://www.schurter.com /PG07
Compliances
The product complies with following Guide Lines
Identification
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS
SCHURTER AG
SCHURTER AG
SCHURTER AG
EU Directive RoHS 2011/65/EU
China RoHS
REACH
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
MicrositeV-Lock
SCHURTER AG
V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
All Variants
Connector
cable
Plug
Type
Order Number
Type
V-Lock
Cord Type
Conductor cross
section
Length [m]
Color
Country Standard
Style
C13
l
H05VV-
F3G1.0
3 x 1 mm²
2.0
black
United King-
dom
UK
BS 1363
angled
-
6051.2008
█
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
60 Pcs
Packaging unit
Mating Inlets/Plugs shuttered
Category / Description
Appliance Inlet Overview complete
6010, Mounting: Snap-in, Solder, quick-connect, screw, PCB, Appliance Inlet: IEC C14
6015, Mounting: Snap-in, Solder, quick-connect, screw, PCB, Appliance Inlet: IEC C18
6048, Mounting: Screw, Appliance Inlet: IEC C14
6010
6015
6048
6061
6061, Mounting: Screw, Appliance Inlet: IEC C14
GSP1, Mounting: Screw, Appliance Inlet, IEC C14, For PCB mounting, IP 40, Quick connect terminals 4.8 x 0.8 mm
angled or straight, Suitable for appliances with protection class I or II
GSP1
...
Appliance Inlet further types to 6051.2008
IEC Inlet Filter Overview complete
5123, Mounting: Screw, Front-/Rear-Side, Filter: Standard and Medical Version, Without fuse holder: 10 A, Themoplast
/ steel tin-plated Appliance Inlet: IEC C14, Suitable for appliances with protection class I or II
5123
5120
5150
KFS
5120, Mounting: Screw with plastic flange, Front-/Rear-Side, Filter: Standard and Medical Version, Without fuse holder:
10 A, Themoplast / steel tin-plated Appliance Inlet: IEC C14, Suitable for appliances with protection class I or II
5150, Mounting: Screw, Front-/Rear-Side, Filter: Standard, medical and industrial version, Without fuse holder: 10 A,
Themoplast / steel tin-plated Appliance Inlet: IEC C14, Suitable for appliances with protection class I
KFS, Mounting: Screw, Front Side, Filter: Standard Version, Without fuse holder: 10 A, Appliance Inlet: IEC C14, pre-
wired
IEC Inlet Filter further types to 6051.2008
2
Connectors
Cord Sets
6051.2008
https://www.schurter.com /PG07
Category / Description
Power Entry Module Overview complete
DD11, Mounting: Screw-on mounting, Rocker switch: non-illuminated or illuminated 2-pole, Quick connect terminals
4.8 x 0.8 mm, Appliance Inlet: IEC C14, With or without protection cover, Fuse holder: 1 or 2 pole, Suitable for appli-
ances with protection class I
DD11
DD21, Mounting: Screw-on mounting Rear Side, Rocker switch: non-illuminated or illuminated 2-pole, additional quick
connect 4.8 x 0.8 mm Appliance Inlet: IEC C14, Fuse holder: 1 or 2 pole
DD21
DC11
DC21
DC11, Mounting: Screw, Rocker switch: non-illuminated or illuminated 1 or 2 pole, Quick connect terminals 4.8 x 0.8
mm, Appliance Inlet: IEC C14, Without fuse holder: Suitable for appliances with protection class I or II
DC21, Mounting: Screw Rear Side, Rocker switch: non-illuminated or illuminated 2-pole, Quick connect terminals 4.8
x 0.8 mm Appliance Inlet: IEC C14, Without fuse holder:
KD, Mounting:Screw, Quick connect terminals 4.8 x 0.8 mm, voltage selector: 2-4 digits, Fuse holder: 1 or 2 pole,
Rocker switch, non-illuminated, 2-pole, V-Lock cord retaining, Appliance Inlet: IEC C14, 250 VAC, prewired, Suitable for KD
appliances with protection class I
Power Entry Module further types to 6051.2008
...
Power Entry Module with line filter Overview complete
Mounting: Screw, from rear-side, A, Filter: Standard Version, Rocker switch: 2-pole, non-illuminated, : IEC C14, Suitable
for appliances with protection class I or II
DA22
DC12
DC22
DD12
DC12, Mounting: Screw, Front-/Rear-Side, Filter, Standard and Medical Version, Without fuse holder:10 A, Rocker
switch: 1 or 2 pole, non-illuminated or illuminated Appliance Inlet: IEC C14, prewired
DC22 Mounting: Screw, Rear Side, PCB, 10 A, Filter: Standard and Medical Version, Without fuse holder: Rocker switch:
1 or 2 pole, non-illuminated or illuminated, Appliance Inlet: IEC C14, Suitable for appliances with protection class I
DD12, Mounting: Screw-on mounting, Front Side, Filter, Standard and Medical Version, Fuse holder:1 or 2 pole, 10 A,
Rocker switch: 2-pole, non-illuminated Appliance Inlet: IEC C14, prewired
DD22 Mounting: Screw-on mounting, Rear Side, PCB, 10 A, Filter: Standard and Medical Version, Fuse holder: 1 or 2
pole, Rocker switch: 2-pole, non-illuminated, Appliance Inlet: IEC C14, Suitable for appliances with protection class I
DD22
...
Power Entry Module with line filter further types to 6051.2008
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
3
Connectors
相关型号：
©2020 ICPDF网 联系我们和版权申明