74AVC16T245 [SGMICRO]

16-Bit Dual-Supply Translating Transceiver with Configurable Voltage Translation and 3-State Outputs;
74AVC16T245
型号: 74AVC16T245
厂家: Shengbang Microelectronics Co, Ltd    Shengbang Microelectronics Co, Ltd
描述:

16-Bit Dual-Supply Translating Transceiver with Configurable Voltage Translation and 3-State Outputs

文件: 总7页 (文件大小:598K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
74AVC16T245  
16-Bit Dual-Supply Translating  
Transceiver with Configurable  
Voltage Translation and 3-State Outputs  
GENERAL DESCRIPTION  
FEATURES  
The 74AVC16T245 is a 16-bit dual-supply translating  
transceiver with configurable voltage translation and  
3-state outputs. The device can be used as two 8-bit  
transceivers or one 16-bit transceiver. The nAn and  
nBn are two 8-bit input-output data ports. nDIR are the  
VCCA Supply Voltage Range: 0.8V to 3.6V  
VCCB Supply Voltage Range: 0.8V to 3.6V  
Inputs Accept Voltages up to 3.6V  
+12mA/-12mA Output Current  
Data Rates:  
�����  
direction control inputs and nOE are the output enable  
380Mbps (≥ 1.8V to 3.3V Translation)  
200Mbps (≥ 1.1V to 3.3V Translation)  
200Mbps (≥ 1.1V to 2.5V Translation)  
200Mbps (≥ 1.1V to 1.8V Translation)  
150Mbps (≥ 1.1V to 1.5V Translation)  
100Mbps (≥ 1.1V to 1.2V Translation)  
Outputs in High-Impedance State when VCCA or  
inputs. VCCA and VCCB are the supply pins. The supply  
voltage of VCCA and VCCB can range from 0.8V to 3.6V,  
making the device suitable for bidirectional translating  
among any of the 0.8V, 1.2V, 1.5V, 1.8V, 2.5V and  
�����  
3.3V voltage nodes. The nAn, nDIR and nOE signals  
are referenced to VCCA and nBn signals are referenced  
to VCCB  
.
VCCB = 0V  
-40to +125Operating Temperature Range  
Available in a Green TSSOP-48 Package  
When nDIR is set high, it allows transmission from nAn  
to nBn. When nDIR is set low, it allows transmission  
�����  
from nBn to nAn. nOE can be used to make the  
outputs disabled so that the buses are effectively  
isolated. In suspend mode, both nAn and nBn are in the  
high-impedance state when either VCCA or VCCB input is  
at GND level.  
This device is highly suitable for partial power-down  
applications using power-off leakage current (IOFF) circuit.  
When the device is powered down, the current backflow  
will be prevented from passing through the device.  
SG Micro Corp  
JANUARY 2023 – REV. A.1  
www.sg-micro.com  
16-Bit Dual-Supply Translating Transceiver with  
74AVC16T245  
Configurable Voltage Translation and 3-State Outputs  
PACKAGE/ORDERING INFORMATION  
SPECIFIED  
TEMPERATURE  
RANGE  
PACKAGE  
DESCRIPTION  
ORDERING  
NUMBER  
PACKAGE  
MARKING  
PACKING  
OPTION  
MODEL  
74AVC16T245  
XTS48  
74AVC16T245  
TSSOP-48  
-40to +125℃  
74AVC16T245XTS48G/TR  
Tape and Reel, 2500  
XXXXX  
MARKING INFORMATION  
NOTE: XXXXX = Date Code, Trace Code and Vendor Code.  
X X X X X  
Vendor Code  
Trace Code  
Date Code - Year  
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If  
you have additional comments or questions, please contact your SGMICRO representative directly.  
ABSOLUTE MAXIMUM RATINGS (1)  
Input Transition Rise and Fall Rate, Δt/ΔV  
Supply Voltage Range, VCCA............................. -0.5V to 4.6V  
Supply Voltage Range, VCCB............................. -0.5V to 4.6V  
Input Voltage Range, VI (2) ................................ -0.5V to 4.6V  
VCCI = 0.8V to 3.6V ........................................ 10ns/V (MAX)  
Operating Temperature Range..................... -40to +125℃  
(2)  
Output Voltage Range, VO  
OVERSTRESS CAUTION  
Suspend or 3-State Mode............................... -0.5V to 4.6V  
Active Mode  
1. Stresses beyond those listed in Absolute Maximum Ratings  
may cause permanent damage to the device. Exposure to  
absolute maximum rating conditions for extended periods  
may affect reliability. Functional operation of the device at any  
conditions beyond those indicated in the Recommended  
Operating Conditions section is not implied.  
A Ports..............................-0.5V to MIN (4.6V, VCCA + 0.5V)  
B Ports..............................-0.5V to MIN (4.6V, VCCB + 0.5V)  
Output Current, IO (VO = 0V to VCC  
)
High-State or Low-State ..........................................±50mA  
Supply Current, ICC, per VCCA or VCCB Pin...................100mA  
Ground Current, IGND, per GND Pin ...........................-100mA  
Input Clamp Current, IIK (VI < 0)...................................-50mA  
Output Clamp Current, IOK (VO < 0)..............................-50mA  
Continuous Output Current.........................................±50mA  
Junction Temperature (3) .............................................+150℃  
Storage Temperature Range.......................-65to +150℃  
Lead Temperature (Soldering, 10s)............................+260℃  
ESD Susceptibility  
2. The minimum input voltage ratings and output voltage ratings  
may be exceeded if the input and output current ratings are  
observed.  
3. The performance capability of a high-performance integrated  
circuit in conjunction with its thermal environment can create  
junction temperatures which are detrimental to reliability.  
ESD SENSITIVITY CAUTION  
HBM.............................................................................8000V  
CDM ............................................................................1000V  
This integrated circuit can be damaged if ESD protections are  
not considered carefully. SGMICRO recommends that all  
integrated circuits be handled with appropriate precautions.  
Failureto observe proper handlingand installation procedures  
can cause damage. ESD damage can range from subtle  
performance degradation tocomplete device failure. Precision  
integrated circuits may be more susceptible to damage  
because even small parametric changes could cause the  
device not to meet the published specifications.  
RECOMMENDED OPERATING CONDITIONS  
Supply Voltage Range, VCCA...............................0.8V to 3.6V  
Supply Voltage Range, VCCB...............................0.8V to 3.6V  
Input Voltage Range, VI .........................................0V to 3.6V  
Output Voltage Range, VO  
Suspend or 3-State Mode....................................0V to 3.6V  
Active Mode  
A Ports.................................................................0V to VCCA  
B Ports.................................................................0V to VCCB  
High-State or Low-State Output Current, IO ................±12mA  
DISCLAIMER  
SG Micro Corp reserves the right to make any change in  
circuit design, or specifications without prior notice.  
SG Micro Corp  
www.sg-micro.com  
JANUARY 2023  
2
16-Bit Dual-Supply Translating Transceiver with  
74AVC16T245  
Configurable Voltage Translation and 3-State Outputs  
LOGIC SYMBOL  
1OE  
2OE  
1DIR  
2DIR  
1A1  
1A2  
2A1  
1B1  
1B2  
2B1  
2B2  
2A2  
1A8  
2A8  
1B8  
2B8  
FUNCTION TABLE  
SUPPLY VOLTAGE  
CONTROL INPUT  
INPUT/OUTPUT  
(1)  
�����  
VCCA, VCCB  
nDIR  
nAn  
nBn  
nOE  
0.8V to 3.6V  
0.8V to 3.6V  
0.8V to 3.6V  
GND (2)  
L
L
H
X
X
nAn = nBn  
Inputs  
L
Inputs  
nBn = nAn  
H
Z
Z
Z
Z
X
H = High Voltage Level  
L = Low Voltage Level  
Z = High-Impedance State  
X = Don’t Care  
NOTES:  
�����  
1. The nAn, nDIR and nOE signals are referenced to VCCA. The nBn signals are referenced to VCCB  
.
2. If at least one of VCCA or VCCB is at GND level, the device enters suspend mode.  
SG Micro Corp  
www.sg-micro.com  
JANUARY 2023  
3
16-Bit Dual-Supply Translating Transceiver with  
74AVC16T245  
Configurable Voltage Translation and 3-State Outputs  
PIN CONFIGURATION  
(TOP VIEW)  
1DIR  
1
2
3
4
5
6
7
8
9
48 1OE  
1A1  
46 1A2  
GND  
1B1  
1B2  
GND  
1B3  
1B4  
VCCB  
1B5  
1B6  
47  
45  
44 1A3  
43 1A4  
VCCA  
42  
1A5  
41  
40 1A6  
GND 10  
39 GND  
1B7  
1B8  
2B1  
2B2  
GND  
2B3  
2B4  
VCCB  
1A7  
1A8  
2A1  
2A2  
GND  
2A3  
2A4  
VCCA  
11  
12  
13  
14  
15  
16  
17  
18  
38  
37  
36  
35  
34  
33  
32  
31  
2B5 19  
2B6 20  
GND 21  
30 2A5  
29 2A6  
28 GND  
2B7  
2B8 23  
2DIR  
2A7  
26 2A8  
2OE  
22  
27  
24  
25  
TSSOP-48  
PIN DESCRIPTION  
PIN  
1, 24  
NAME  
1DIR, 2DIR  
FUNCTION  
Direction Control Inputs.  
2, 3, 5, 6, 8, 9, 11, 12  
13, 14, 16, 17, 19, 20, 22, 23  
4, 10, 15, 21, 28, 34, 39, 45  
7, 18  
1B1, 1B2, 1B3, 1B4, 1B5, 1B6, 1B7, 1B8 Data Inputs/Outputs.  
2B1, 2B2, 2B3, 2B4, 2B5, 2B6, 2B7, 2B8 Data Inputs/Outputs.  
GND  
VCCB  
Ground.  
Supply Voltage VCCB. The nBn signals are  
referenced to VCCB.  
����� �����  
48, 25  
Output Enable Inputs (Active Low).  
1OE, 2OE  
47, 46, 44, 43, 41, 40, 38, 37  
36, 35, 33, 32, 30, 29, 27, 26  
31, 42  
1A1, 1A2, 1A3, 1A4,1A5, 1A6, 1A7, 1A8 Data Inputs/Outputs.  
2A1, 2A2, 2A3, 2A4,2A5, 2A6, 2A7, 2A8 Data Inputs/Outputs.  
�����  
Supply Voltage VCCA. The nAn, nDIR and nOE  
signals are referenced to VCCA  
VCCA  
.
SG Micro Corp  
www.sg-micro.com  
JANUARY 2023  
4
PACKAGE INFORMATION  
PACKAGE OUTLINE DIMENSIONS  
TSSOP-48  
D
E
E1  
7.50  
1.50  
b
e
0.30  
0.50  
RECOMMENDED LAND PATTERN (Unit: mm)  
L1  
0.25  
A
A1  
θ
L
A2  
c
Dimensions In Millimeters  
MOD  
Symbol  
MIN  
MAX  
1.20  
0.15  
1.05  
0.26  
0.19  
12.60  
8.30  
6.20  
A
A1  
A2  
b
0.05  
0.85  
0.18  
0.15  
12.40  
7.90  
6.00  
0.10  
0.95  
c
D
12.50  
8.10  
E
E1  
e
6.10  
0.50 BSC  
1.00 REF  
L
L1  
θ
0.45  
0°  
0.75  
8°  
SG Micro Corp  
TX00180.000  
www.sg-micro.com  
PACKAGE INFORMATION  
TAPE AND REEL INFORMATION  
REEL DIMENSIONS  
TAPE DIMENSIONS  
P2  
P0  
W
Q2  
Q4  
Q2  
Q4  
Q2  
Q4  
Q1  
Q3  
Q1  
Q3  
Q1  
Q3  
B0  
Reel Diameter  
P1  
A0  
K0  
Reel Width (W1)  
DIRECTION OF FEED  
NOTE: The picture is only for reference. Please make the object as the standard.  
KEY PARAMETER LIST OF TAPE AND REEL  
Reel Width  
Reel  
Diameter  
A0  
B0  
K0  
P0  
P1  
P2  
W
Pin1  
Package Type  
W1  
(mm)  
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant  
TSSOP-48  
13’’  
24.4  
8.60  
13.00  
1.80  
4.0  
12.0  
2.0  
24.0  
Q1  
SG Micro Corp  
TX10000.000  
www.sg-micro.com  
PACKAGE INFORMATION  
CARTON BOX DIMENSIONS  
NOTE: The picture is only for reference. Please make the object as the standard.  
KEY PARAMETER LIST OF CARTON BOX  
Length  
(mm)  
Width  
(mm)  
Height  
(mm)  
Reel Type  
Pizza/Carton  
13″  
386  
280  
370  
5
SG Micro Corp  
www.sg-micro.com  
TX20000.000  

相关型号:

74AVC16T245BX

16-bit dual supply translating transceiver with configurable voltage translation; 3-state
NXP

74AVC16T245DGG

16-bit dual supply translating transceiver with configurable voltage translation; 3-state
NXP

74AVC16T245DGG

16-bit dual supply translating transceiver with configurable voltage translation; 3-stateProduction
NEXPERIA

74AVC16T245DGG,512

74AVC16T245 - 16-bit dual supply translating transceiver TSSOP 48-Pin
NXP

74AVC16T245DGG,518

74AVC16T245 - 16-bit dual supply translating transceiver TSSOP 48-Pin
NXP

74AVC16T245DGGRE4

16-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS
TI

74AVC16T245DGGRG4

16-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS
TI

74AVC16T245DGV

16-bit dual supply translating transceiver with configurable voltage translation; 3-state
NXP

74AVC16T245DGV

16-bit dual supply translating transceiver with configurable voltage translation; 3-stateProduction
NEXPERIA

74AVC16T245DGV-Q100

AVC SERIES, DUAL 8-BIT TRANSCEIVER, TRUE OUTPUT, PDSO48, 4.40 MM, 0.40 MM PITCH, PLASTIC, MO-153, SOT480-1, TSSOP-48
NXP

74AVC16T245DGV-Q100

16-bit dual supply translating transceiver with configurable voltage translation; 3-stateProduction
NEXPERIA

74AVC16T245DGV-Q1J

74AVC16T245-Q100 - 16-bit dual supply translating transceiver with configurable voltage translation; 3-state TSSOP 48-Pin
NXP