74AVC8T245 [SGMICRO]

8-Bit Dual-Supply Translating Transceiver with Configurable Voltage Translation; 3-State Outputs;
74AVC8T245
型号: 74AVC8T245
厂家: Shengbang Microelectronics Co, Ltd    Shengbang Microelectronics Co, Ltd
描述:

8-Bit Dual-Supply Translating Transceiver with Configurable Voltage Translation; 3-State Outputs

文件: 总7页 (文件大小:537K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
74AVC8T245  
8-Bit Dual-Supply Translating  
Transceiver with Configurable  
Voltage Translation and 3-State Outputs  
GENERAL DESCRIPTION  
FEATURES  
The 74AVC8T245 is an 8-bit, dual-supply bus  
transceiver with configurable voltage translation. The  
An and Bn are 8-bit data input-output ports, DIR is the  
VCCA Supply Voltage Range: 0.8V to 3.6V  
VCCB Supply Voltage Range: 0.8V to 3.6V  
Inputs Accept Voltages up to 3.6V  
+12mA/-12mA Output Current  
�����  
direction control input. OE is an output enable input  
and VCCA and VCCB are dual supply pins. The supply  
voltage of VCCA and VCCB can range from 0.8V to 3.6V,  
making the device suitable for bidirectional translating  
among any of the 0.8V, 1.2V, 1.5V, 1.8V, 2.5V and  
Data Rates:  
380Mbps (1.8V to 3.3V Translation)  
260Mbps (1.1V to 3.3V Translation)  
260Mbps (1.1V to 2.5V Translation)  
210Mbps (1.1V to 1.8V Translation)  
150Mbps (1.1V to 1.5V Translation)  
100Mbps (1.1V to 1.2V Translation)  
Outputs in High-Impedance State when VCCA or  
�����  
3.3V voltage nodes. The An, OE and DIR pins are  
referenced to VCCA and Bn pins are referenced to VCCB  
.
The direction control (DIR) input determines the  
direction of the data flow. The DIR (active high) enables  
data from An ports to Bn ports. The DIR (active low)  
enables data from Bn ports to An ports. The output  
VCCB = 0V  
-40to +125Operating Temperature Range  
Available in Green TQFN-5.5×3.5-24L and  
TSSOP-24 Packages  
�����  
enable (OE) input, when high, disables both An and Bn  
ports, so the buses are effectively isolated.  
LOGIC DIAGRAM  
FUNCTION TABLE  
22  
OE  
CONTROL INPUT  
INPUT/OUTPUT  
2
DIR  
�����  
DIR  
L
An  
An = Bn  
Inputs  
Z
Bn  
Inputs  
Bn = An  
Z
OE  
L
3
A1  
L
H
21  
B1  
H
X
X
X
Z
Z
4
A2  
H = High Voltage Level  
L = Low Voltage Level  
Z = High-Impedance State  
X = Don’t Care  
20  
B2  
10  
A8  
14  
B8  
SG Micro Corp  
OCTOBER 2022 – REV. A. 2  
www.sg-micro.com  
8-Bit Dual-Supply Translating Transceiver with  
74AVC8T245  
Configurable Voltage Translation and 3-State Outputs  
PACKAGE/ORDERING INFORMATION  
SPECIFIED  
TEMPERATURE  
RANGE  
PACKAGE  
DESCRIPTION  
ORDERING  
NUMBER  
PACKAGE  
MARKING  
PACKING  
OPTION  
MODEL  
R43  
XTQQ  
XXXXX  
TQFN-5.5×3.5-24L -40to +12574AVC8T245XTQQ24G/TR  
Tape and Reel, 3000  
Tape and Reel, 4000  
74AVC8T245  
74AVC8T245  
XTS24  
TSSOP-24  
-40to +125℃  
74AVC8T245XTS24G/TR  
XXXXX  
MARKING INFORMATION  
NOTE: XXXXX = Date Code, Trace Code and Vendor Code.  
X X X X X  
Vendor Code  
Trace Code  
Date Code - Year  
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If  
you have additional comments or questions, please contact your SGMICRO representative directly.  
ABSOLUTE MAXIMUM RATINGS (1)  
Input Transition Rise and Fall Rate, Δt/ΔV...... 10ns/V (MAX)  
Supply Voltage Range, VCCA............................. -0.5V to 4.6V  
Supply Voltage Range, VCCB............................. -0.5V to 4.6V  
Input Voltage Range, VI (2) ................................ -0.5V to 4.6V  
Operating Temperature Range..................... -40to +125℃  
OVERSTRESS CAUTION  
(2)  
Output Voltage Range, VO  
1. Stresses beyond those listed in Absolute Maximum Ratings  
may cause permanent damage to the device. Exposure to  
absolute maximum rating conditions for extended periods may  
affect reliability. Functional operation of the device at any  
conditions beyond those indicated in the Recommended  
Operating Conditions sectionis not implied.  
3-State Mode .................................................. -0.5V to 4.6V  
High-State or Low-State  
A ports ..............................-0.5V to MIN (4.6V, VCCA + 0.5V)  
B ports ..............................-0.5V to MIN (4.6V, VCCB + 0.5V)  
Output Current, IO  
High-State or Low-State ..........................................±50mA  
Input Clamp Current, IIK (VI < 0)...................................-50mA  
Output Clamp Current, IOK (VO < 0)..............................-50mA  
Supply Current, ICCA or ICCB.........................................100mA  
Ground Current, IGND..................................................-100mA  
Junction Temperature (3) .............................................+150℃  
Storage Temperature Range.......................-65to +150℃  
Lead Temperature (Soldering, 10s)............................+260℃  
ESD Susceptibility  
2. The input and output voltage ratings may be exceeded if the  
input and output clamp current ratings are observed.  
3. The performance capability of a high-performance integrated  
circuit in conjunction with its thermal environment can create  
junction temperatures which are detrimental to reliability.  
ESD SENSITIVITY CAUTION  
This integrated circuit can be damaged if ESD protections are  
not considered carefully. SGMICRO recommends that all  
integrated circuits be handled with appropriate precautions.  
Failureto observe proper handlingand installation procedures  
can cause damage. ESD damage can range from subtle  
performance degradation tocomplete device failure. Precision  
integrated circuits may be more susceptible to damage  
because even small parametric changes could cause the  
device not to meet the published specifications.  
HBM.............................................................................8000V  
CDM ............................................................................1000V  
RECOMMENDED OPERATING CONDITIONS  
Supply Voltage Range, VCCA...............................0.8V to 3.6V  
Supply Voltage Range, VCCB...............................0.8V to 3.6V  
Input Voltage Range, VI .........................................0V to 3.6V  
Output Voltage Range, VO  
3-State Mode .......................................................0V to 3.6V  
High-State or Low-State  
DISCLAIMER  
SG Micro Corp reserves the right to make any change in  
A ports .................................................................0V to VCCA  
B ports .................................................................0V to VCCB  
High-State or Low-State Output Current, IO ................±12mA  
circuit design, or specifications without prior notice.  
SG Micro Corp  
www.sg-micro.com  
OCTOBER 2022  
2
8-Bit Dual-Supply Translating Transceiver with  
74AVC8T245  
Configurable Voltage Translation and 3-State Outputs  
PIN CONFIGURATIONS  
(TOP VIEW)  
(TOP VIEW)  
VCCA  
1
VCCB  
24  
VCCA  
1
2
3
4
5
6
24 VCCB  
VCCB  
OE  
B1  
DIR  
A1  
A2  
A3  
A4  
A5  
A6  
A7  
2
3
4
5
6
23  
22  
21  
20  
DIR  
A1  
A2  
A3  
A4  
23  
22  
21  
VCCB  
OE  
B1  
B2  
20 B2  
B3  
18 B4  
17  
19 B3  
GND  
19  
B4  
18  
7
8
9
A5  
A6  
A7  
7
8
9
17  
16  
15  
B5  
B6  
B7  
B5  
A8 10  
11  
16 B6  
15 B7  
14 B8  
13 GND  
14 B8  
GND  
A8 10  
12  
13  
GND  
GND  
GND 11  
GND 12  
TQFN-5.5×3.5-24L  
TSSOP-24  
PIN DESCRIPTION  
PIN  
NAME  
VCCA  
DIR  
FUNCTION  
Supply Voltage VCCA. The An, DIR and OE signals are  
�����  
1
referenced to VCCA  
.
2
3, 4, 5, 6, 7, 8, 9, 10  
11, 12, 13  
Direction Control Input.  
A1, A2, A3, A4, A5, A6, A7, A8 Data Inputs/Outputs.  
GND Ground.  
14, 15, 16, 17, 18, 19, 20, 21  
22  
B8, B7, B6, B5, B4, B3, B2, B1 Data Inputs/Outputs.  
�����  
OE  
Output Enable Input (Active Low).  
Supply Voltage VCCB. The Bn signals are referenced to  
VCCB.  
Connect it to GND internally. This pad is not an electrical  
connection point.  
23, 24  
VCCB  
GND  
Exposed Pad  
SG Micro Corp  
www.sg-micro.com  
OCTOBER 2022  
3
PACKAGE INFORMATION  
PACKAGE OUTLINE DIMENSIONS  
TQFN-5.5×3.5-24L  
k
e1  
D
N24  
N1  
N2  
N23  
D1  
E1  
E
e
N13  
N12  
b
L
b1  
TOP VIEW  
BOTTOM VIEW  
4.1  
2.7  
0.70  
2.05  
A
6.1  
4.7  
4.05  
A1  
0.5  
A2  
SIDE VIEW  
0.25  
0.20  
1.5  
RECOMMENDED LAND PATTERN (Unit: mm)  
Dimensions  
In Millimeters  
Dimensions  
In Inches  
Symbol  
MIN  
MAX  
0.800  
0.050  
MIN  
0.028  
0.000  
MAX  
0.031  
0.002  
A
A1  
A2  
D
0.700  
0.000  
0.203 REF  
0.325 REF  
0.008 REF  
0.013 REF  
3.400  
1.950  
5.400  
3.950  
3.600  
2.150  
5.600  
4.150  
0.134  
0.077  
0.213  
0.156  
0.142  
0.085  
0.220  
0.163  
D1  
E
E1  
k
b
0.200  
0.150  
0.300  
0.300  
0.250  
0.500  
0.008  
0.006  
0.012  
0.012  
0.010  
0.020  
b1  
L
e
0.500 BSC  
1.500 BSC  
0.020 BSC  
0.059 BSC  
e1  
NOTE: This drawing is subject to change without notice.  
SG Micro Corp  
TX00122.000  
www.sg-micro.com  
PACKAGE INFORMATION  
PACKAGE OUTLINE DIMENSIONS  
TSSOP-24  
D
5.94  
E1  
E
1.78  
b
e
0.42  
0.65  
RECOMMENDED LAND PATTERN (Unit: mm)  
L
ccc  
C
A
SEATING PLANE  
A2  
A1  
c
θ
C
H
Dimensions In Millimeters  
Symbol  
MIN  
-
MOD  
MAX  
1.200  
0.150  
1.050  
0.300  
0.200  
7.900  
4.500  
6.600  
A
A1  
A2  
b
-
0.050  
0.800  
0.190  
0.090  
7.700  
4.300  
6.200  
-
-
-
c
-
D
-
E
-
E1  
e
-
0.650 BSC  
L
0.450  
0°  
-
0.250 TYP  
-
0.750  
8°  
H
θ
ccc  
0.100  
NOTES:  
1. This drawing is subject to change without notice.  
2. The dimensions do not include mold flashes, protrusions or gate burrs.  
3. Reference JEDEC MO-153.  
SG Micro Corp  
TX00022.001  
www.sg-micro.com  
PACKAGE INFORMATION  
TAPE AND REEL INFORMATION  
REEL DIMENSIONS  
TAPE DIMENSIONS  
P2  
P0  
W
Q2  
Q4  
Q2  
Q4  
Q2  
Q4  
Q1  
Q3  
Q1  
Q3  
Q1  
Q3  
B0  
Reel Diameter  
P1  
A0  
K0  
Reel Width (W1)  
DIRECTION OF FEED  
NOTE: The picture is only for reference. Please make the object as the standard.  
KEY PARAMETER LIST OF TAPE AND REEL  
Reel Width  
Reel  
Diameter  
A0  
B0  
K0  
P0  
P1  
P2  
W
Pin1  
Package Type  
W1  
(mm)  
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant  
TQFN-5.5×3.5-24L  
TSSOP-24  
13″  
13″  
12.4  
16.4  
3.80  
6.80  
5.80  
8.30  
1.00  
1.60  
4.0  
4.0  
8.0  
8.0  
2.0  
2.0  
12.0  
16.0  
Q1  
Q1  
SG Micro Corp  
TX10000.000  
www.sg-micro.com  
PACKAGE INFORMATION  
CARTON BOX DIMENSIONS  
NOTE: The picture is only for reference. Please make the object as the standard.  
KEY PARAMETER LIST OF CARTON BOX  
Length  
(mm)  
Width  
(mm)  
Height  
(mm)  
Reel Type  
Pizza/Carton  
13″  
386  
280  
370  
5
SG Micro Corp  
www.sg-micro.com  
TX20000.000  

相关型号:

74AVC8T245-Q100

8-bit dual supply translating transceiver with configurable voltage translation 3-state
NEXPERIA

74AVC8T245BQ

8-bit dual supply translating transceiver with configurable voltage translation; 3-state
NXP

74AVC8T245BQ

8-bit dual supply translating transceiver with configurable voltage translation; 3-stateProduction
NEXPERIA

74AVC8T245BQ,115

74AVC8T245 - 8-bit dual supply translating transceiver with configurable voltage translation; 3-state QFN 24-Pin
NXP

74AVC8T245BQ,118

74AVC8T245 - 8-bit dual supply translating transceiver with configurable voltage translation; 3-state QFN 24-Pin
NXP

74AVC8T245BQ-Q100

8-bit dual supply translating transceiver with configurable voltage translation 3-state
NEXPERIA

74AVC8T245BZ

8-bit dual supply translating transceiver with configurable voltage translation; 3-stateProduction
NEXPERIA

74AVC8T245DGVRE4

8-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS
TI

74AVC8T245DGVRG4

8-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS
TI

74AVC8T245PW

8-bit dual supply translating transceiver with configurable voltage translation; 3-state
NXP

74AVC8T245PW

8-bit dual supply translating transceiver with configurable voltage translation; 3-stateProduction
NEXPERIA

74AVC8T245PW,118

74AVC8T245 - 8-bit dual supply translating transceiver with configurable voltage translation; 3-state TSSOP2 24-Pin
NXP