SGM11102G [SGMICRO]

SPDT Switch for High Power Applications;


型号：	SGM11102G
厂家：	Shengbang Microelectronics Co, Ltd
描述：	SPDT Switch for High Power Applications 光电二极管
文件：	总6页 (文件大小：371K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SGM11102G

SPDT Switch for High Power Applications

GENERAL DESCRIPTION

FEATURES

The SGM11102G is a single-pole/double-throw (SPDT)

2G/3G/4G/5G transmit and receive switch, which

supports from 0.1GHz to 5.8GHz. The device features

low control voltage and high isolation.

● Operation Frequency Range: 0.1GHz to 5.8GHz

● Supply Voltage Range: 1.65V to 3.3V

● High Isolation:

f₀= 0.8GHz, P_IN= 0dBm: 40dB (TYP)

f₀= 1.7GHz, P_IN= 0dBm: 34dB (TYP)

f₀= 2.7GHz, P_IN= 0dBm: 30dB (TYP)

f₀= 3.8GHz, P_IN= 0dBm: 27dB (TYP)

f₀= 5.8GHz, P_IN= 0dBm: 20dB (TYP)

● Low Insertion Loss:

The SGM11102G has the ability to integrate SPDT RF

switch and GPIO controller on an SOI chip. Internal

driver and decoder for switch control signals are offered

by the GPIO controller, which makes it flexible in RF

path band and routing selection.

f₀= 0.8GHz, P_IN= 0dBm: 0.26dB (TYP)

f₀= 1.7GHz, P_IN= 0dBm: 0.28dB (TYP)

f₀= 2.7GHz, P_IN= 0dBm: 0.30dB (TYP)

f₀= 3.8GHz, P_IN= 0dBm: 0.36dB (TYP)

f₀= 5.8GHz, P_IN= 0dBm: 0.68dB (TYP)

● Available in a Green XTDFN-1.1×0.7-6L Package

No external DC blocking capacitors are required on the

RF paths as long as no external DC voltage is applied,

which can save PCB area and cost.

The SGM11102G is available in a Green XTDFN-1.1×

0.7-6L package.

BLOCK DIAGRAM

APPLICATIONS

VDD VCTL

2G/3G/4G/5G Applications

Supply and Logic

RF1

RFCOM

RF2

Figure 1. SGM11102G Block Diagram

SG Micro Corp

MARCH 2023 – REV. A

www.sg-micro.com

SGM11102G

SPDT Switch for High Power Applications

PACKAGE/ORDERING INFORMATION

SPECIFIED

TEMPERATURE

RANGE

PACKAGE

DESCRIPTION

ORDERING

NUMBER

PACKAGE

MARKING

PACKING

OPTION

MODEL

SGM11102G XTDFN-1.1×0.7-6L

SGM11102GYXGG6G/TR

Tape and Reel, 10000

-40℃ to +90℃

MARKING INFORMATION

NOTE: Fixed character for 6S.

Serial Number

Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If

you have additional comments or questions, please contact your SGMICRO representative directly.

ABSOLUTE MAXIMUM RATINGS

OVERSTRESS CAUTION

Supply Voltage, V_DD.......................................... -0.3V to 3.6V

Control Voltage, V_CTL........................................ -0.3V to 3.6V

RF Input Power, P_IN....................................................39dBm

Junction Temperature.................................................+150℃

Storage Temperature Range.......................-55℃ to +150℃

Lead Temperature (Soldering, 10s)............................+260℃

ESD Susceptibility

Stresses beyond those listed in Absolute Maximum Ratings

may cause permanent damage to the device. Exposure to

absolute maximum rating conditions for extended periods

may affect reliability. Functional operation of the device at any

conditions beyond those indicated in the Recommended

Operating Conditions section is not implied.

HBM.............................................................................2000V

CDM ............................................................................2000V

ESD SENSITIVITY CAUTION

This integrated circuit can be damaged if ESD protections are

not considered carefully. SGMICRO recommends that all

integrated circuits be handled with appropriate precautions.

Failureto observe proper handlingand installation procedures

can cause damage. ESD damage can range from subtle

performance degradation tocomplete device failure. Precision

integrated circuits may be more susceptible to damage

because even small parametric changes could cause the

device not to meet the published specifications.

RECOMMENDED OPERATING CONDITIONS

Operating Temperature Range......................-40℃ to +90℃

Operating Frequency Range, f₀................ 0.1GHz to 5.8GHz

Supply Voltage, V_DD..........................................1.65V to 3.3V

Control High Voltage, V_{CTL_H}...............................1.3V to 3.3V

Control Low Voltage, V_{CTL_L}...................................0V to 0.3V

DISCLAIMER

SG Micro Corp reserves the right to make any change in

circuit design, or specifications without prior notice.

SG Micro Corp

www.sg-micro.com

MARCH 2023

SGM11102G

SPDT Switch for High Power Applications

PIN CONFIGURATION

(TOP VIEW)

RF2

VCTL

GND

RFCOM

RF1

VDD

XTDFN-1.1×0.7-6L

PIN DESCRIPTION

NAME

RF2

FUNCTION

RF Port 2.

GND

Ground.

RF1

RF Port 1.

VDD

DC Power Supply.

RF Common Port.

DC Control Voltage.

RFCOM

VCTL

LOGIC TRUTH TABLE

VCTL

Low

ON PATH

RFCOM to RF1

RFCOM to RF2

High

SG Micro Corp

www.sg-micro.com

MARCH 2023

PACKAGE INFORMATION

PACKAGE OUTLINE DIMENSIONS

XTDFN-1.1×0.7-6L

PIN 1#

TOP VIEW

BOTTOM VIEW

0.20

SEATING PLANE

0.40

eee C

SIDE VIEW

RECOMMENDED LAND PATTERN (Unit: mm)

Dimensions In Millimeters

Symbol

MIN

MOD

MAX

0.400

0.050

0.340

0.000

0.100 REF

0.150

1.000

0.600

0.250

1.200

0.800

0.400 BSC

0.100

0.000

0.300

0.100

eee

0.050

NOTE: This drawing is subject to change without notice.

SG Micro Corp

TX00312.000

www.sg-micro.com

PACKAGE INFORMATION

TAPE AND REEL INFORMATION

REEL DIMENSIONS

TAPE DIMENSIONS

Reel Diameter

Reel Width (W1)

DIRECTION OF FEED

NOTE: The picture is only for reference. Please make the object as the standard.

KEY PARAMETER LIST OF TAPE AND REEL

Reel Width

Reel

Diameter

Pin1

Package Type

(mm)

(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant

XTDFN-1.1×0.7-6L

7″

9.5

0.80

1.20

0.55

4.0

2.0

8.0

SG Micro Corp

TX10000.000

www.sg-micro.com

PACKAGE INFORMATION

CARTON BOX DIMENSIONS

NOTE: The picture is only for reference. Please make the object as the standard.

KEY PARAMETER LIST OF CARTON BOX

Length

(mm)

Width

(mm)

Height

(mm)

Reel Type

Pizza/Carton

7″ (Option)

7″

368

442

227

410

224

SG Micro Corp

www.sg-micro.com

TX20000.000

相关型号：