SGM12214A [SGMICRO]

SP4T MIPI RFFE High Power Switch;


型号：	SGM12214A
厂家：	Shengbang Microelectronics Co, Ltd
描述：	SP4T MIPI RFFE High Power Switch
文件：	总7页 (文件大小：463K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SGM12214A

SP4T MIPI RFFE High Power Switch

GENERAL DESCRIPTION

FEATURES

The SGM12214A is a single-pole/four-throw (SP4T)

switch, which supports a wide operating frequency from

0.4GHz to 5.8GHz. The device provides low insertion

loss and high isolation performance. These specifications

make the device appropriate for 2G/3G/4G/5G applications

that need high power processing and high linearity.

● Operating Frequency Range: 0.4GHz to 5.8GHz

● Low Insertion Loss

● High Isolation

● MIPI RFFE V2.1 Interface Compatible

● Input 0.1dB Compression Point: 40dBm

● Capable of 1.8V Operation

● No External DC Blocking Capacitors Required

● Available in a Green ULGA-1.1×1.1-9L Package

No external DC blocking capacitors are required on the

RF paths as long as no external DC voltage is applied,

which can save PCB area and cost.

The SGM12214A is available in a Green ULGA-1.1×1.1-9L

package.

BLOCK DIAGRAM

GND SCL SDA VIO

APPLICATIONS

MIPI RFFE Interface

2G/3G/4G/5G Applications

RF1

RF2

RFCOM

RF3

RF4

Figure 1. SGM12214A Block Diagram

SG Micro Corp

DECEMBER 2022 – REV.A.1

www.sg-micro.com

SGM12214A

SP4T MIPI RFFE High Power Switch

PACKAGE/ORDERING INFORMATION

SPECIFIED

TEMPERATURE

RANGE

PACKAGE

DESCRIPTION

ORDERING

NUMBER

PACKAGE

MARKING

PACKING

OPTION

MODEL

SGM12214A

ULGA-1.1×1.1-9L

SGM12214AYULA9G/TR

Tape and Reel, 3000

-40℃ to +85℃

MARKING INFORMATION

NOTE: Fixed character for ZT.

Serial Number

Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If

you have additional comments or questions, please contact your SGMICRO representative directly.

OVERSTRESS CAUTION

ABSOLUTE MAXIMUM RATINGS

Stresses beyond those listed in Absolute Maximum Ratings

may cause permanent damage to the device. Exposure to

absolute maximum rating conditions for extended periods

may affect reliability. Functional operation of the device at any

conditions beyond those indicated in the Recommended

Operating Conditions section is not implied.

Supply Voltage, V_IO.........................................................2.5V

SDA, SCL Control Voltage..............................................2.5V

Maximum Power Handling.....................................................

.....................................40dBm (1:1 VSWR, +90℃, 25% DC)

Junction Temperature.................................................+150℃

Storage Temperature Range.......................-55℃ to +150℃

Lead Temperature (Soldering, 10s) ............................+260℃

ESD Susceptibility

ESD SENSITIVITY CAUTION

HBM.............................................................................1000V

CDM ............................................................................2000V

This integrated circuit can be damaged if ESD protections are

not considered carefully. SGMICRO recommends that all

integrated circuits be handled with appropriate precautions.

Failureto observe proper handlingand installation procedures

can cause damage. ESD damage can range from subtle

performance degradation tocomplete device failure. Precision

integrated circuits may be more susceptible to damage

because even small parametric changes could cause the

device not to meet the published specifications.

RECOMMENDED OPERATING CONDITIONS

Operating Temperature Range ......................-40℃ to +85℃

Supply Voltage, V_IO.........................................1.65V to 1.95V

SDA Logic Output Low Voltage ....................0V to (0.2 × V_IO)

SDA Logic Output High Voltage................... (0.8 × V_IO) to V_IO

SDA, SCL Logic High Current........................... 0.1μA to 5μA

DISCLAIMER

SG Micro Corp reserves the right to make any change in

circuit design, or specifications without prior notice.

SG Micro Corp

www.sg-micro.com

DECEMBER 2022

SGM12214A

SP4T MIPI RFFE High Power Switch

PIN CONFIGURATION

(TOP VIEW)

VIO

SCL

SDA

RF2

GND

RF1

RF4

RFCOM

RF3

ULGA-1.1×1.1-9L

PIN DESCRIPTION

NAME

VIO

FUNCTION

Supply Voltage.

RF Port 2.

RF2

RF4

RF Port 4.

RFCOM

RF3

RF Common Port.

RF Port 3.

RF1

RF Port 1.

SDA

SCL

RFFE Data Signal.

RFFE Clock Signal.

Ground.

GND

SG Micro Corp

www.sg-micro.com

DECEMBER 2022

SGM12214A

SP4T MIPI RFFE High Power Switch

ELECTRICAL CHARACTERISTICS

(T_A= +25℃, V_IO= 1.65V to 1.95V, typical values are at V_IO= 1.8V, input and output resistance = 50Ω, SDA/SCL = 1.8V/0V,

unless otherwise noted.)

PARAMETER

SYMBOL

CONDITIONS

MIN

TYP

MAX

UNITS

DC Characteristics

Supply Voltage

Supply Current

V_IO

I_VIO

1.65

1.8

1.95

100

Active mode

μA

Low power mode

Turn-On Time

t_ON

t_SW

t_WK

t_RST

50% V_DDto 90% RF

μs

RF Path Switching Time

Wake Up Time

Switching CMD 50% SCL to 90%/10% RF

End of low power state 50% SCL to 90% RF

VIO off to it starts to re-power up

VIO Reset Time

RF Characteristics

f₀= 0.4GHz to 1.0GHz

f₀= 1.0GHz to 2.0GHz

f₀= 2.0GHz to 2.7GHz

f₀= 3.0GHz to 3.8GHz

f₀= 4.8GHz to 5.8GHz

f₀= 0.4GHz to 1.0GHz

f₀= 1.0GHz to 2.0GHz

f₀= 2.0GHz to 2.7GHz

f₀= 3.0GHz to 3.8GHz

f₀= 4.8GHz to 5.8GHz

f₀= 900MHz, P_IN= 26dBm

f₀= 900MHz, P_IN= 35dBm

f₀= 1900MHz, P_IN= 32dBm

f₀= 900MHz, P_IN= 26dBm

f₀= 900MHz, P_IN= 35dBm

f₀= 1900MHz, P_IN= 32dBm

f₀= 0.4GHz to 2.7GHz

f₀= 2.7GHz to 5.8GHz

f₀= 0.4GHz to 2.7GHz, CW

f₀= 3.0GHz to 5.8GHz, CW

0.35

0.40

0.47

0.51

0.68

0.50

0.70

0.78

0.97

1.01

Insertion Loss

(RF1/RF2/RF3/RF4 to RFCOM)

Isolation

(RF1/RF2/RF3/RF4 to RFCOM)

ISO

-101

-90

-93

-96

-80

-93

-95

-86

-80

-94

-75

-85

2^ndHarmonics

(RF1/RF2/RF3/RF4 to RFCOM)

2f₀

dBc

3^rdHarmonics

(RF1/RF2/RF3/RF4 to RFCOM)

3f₀

dBc

Input Return Loss

(RFCOM to RF1/RF2/RF3/RF4)

Input 0.1dB Compression Point

(RFCOM to RF1/RF2/RF3/RF4)

P_0.1dB

IMD2

dBm

dBc

f₀= 836.5MHz, P_IN= 20dBm

f₁= 1718MHz, P_IN= 20dBm

f₀= 836.5MHz, P_IN= 20dBm

f₁= 791.5MHz, P_IN= 20dBm

f₀= 1760MHz, P_IN= 20dBm

f₁= 1950MHz, P_IN= 20dBm

f₀= 2535MHz, P_IN= 20dBm

f₁= 2415MHz, P_IN= 20dBm

2^ndOrder Intermodulation

3^rdOrder Intermodulation

IMD3

dBc

SG Micro Corp

www.sg-micro.com

DECEMBER 2022

PACKAGE INFORMATION

PACKAGE OUTLINE DIMENSIONS

ULGA-1.1×1.1-9L

PIN 1#

TOP VIEW

BOTTOM VIEW

0.20

0.40

SIDE VIEW

RECOMMENDED LAND PATTERN (Unit: mm)

Dimensions In Millimeters

Symbol

MIN

MOD

0.580

MAX

0.630

0.210

0.530

0.150

0.180

0.400 BSC

1.100

1.000

1.200

1.100

0.400 BSC

0.200

0.150

0.250

0.050 REF

NOTE: This drawing is subject to change without notice.

SG Micro Corp

TX00213.000

www.sg-micro.com

PACKAGE INFORMATION

TAPE AND REEL INFORMATION

REEL DIMENSIONS

TAPE DIMENSIONS

Reel Diameter

Reel Width (W1)

DIRECTION OF FEED

NOTE: The picture is only for reference. Please make the object as the standard.

KEY PARAMETER LIST OF TAPE AND REEL

Reel Width

Reel

Diameter

Pin1

Package Type

(mm)

(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant

ULGA-1.1×1.1-9L

7″

8.6

1.26

0.72

4.0

2.0

8.0

SG Micro Corp

TX10000.000

www.sg-micro.com

PACKAGE INFORMATION

CARTON BOX DIMENSIONS

NOTE: The picture is only for reference. Please make the object as the standard.

KEY PARAMETER LIST OF CARTON BOX

Length

(mm)

Width

(mm)

Height

(mm)

Reel Type

Pizza/Carton

7″ (Option)

7″

368

442

227

410

224

SG Micro Corp

www.sg-micro.com

TX20000.000

相关型号：