SGM13001C [SGMICRO]
Low Noise Amplifier for GNSS;型号: | SGM13001C |
厂家: | Shengbang Microelectronics Co, Ltd |
描述: | Low Noise Amplifier for GNSS |
文件: | 总6页 (文件大小:436K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SGM13001C
Low Noise Amplifier for GNSS
GENERAL DESCRIPTION
FEATURES
The SGM13001C is a low noise amplifier (LNA) for
GLONASS, Galileo, Beidou and GPS applications. The
device delivers 19.1dB gain at an extremely low noise
figure of 0.83dB. It also features high gain and excellent
linearity performance that operates from 1550MHz to
1615MHz.
● High Gain: 19.1dB at 1575.42MHz
● Low Noise Figure: 0.83dB at 1575.42MHz
● Low Operation Current: 6.4mA
● Current Less than 2.3μA in Power Down Mode
● Operating Frequency Range:
1550MHz to 1615MHz
● Single Supply Voltage Range: 1.6V to 3.6V
● Low Cost BOM
The device requires 6.4mA from a single 1.6V to 3.6V
supply, dropping to below 2.3μA in power down mode.
● Lead-Free and RoHS Compliant
● Available in a Green UTDFN-1.5×1.0-6AL
Package
No external DC blocking capacitors are required on the
RF paths as long as no external DC voltage is applied,
which can save PCB area and cost.
The SGM13001C is available in a Green UTDFN-
1.5×1.0-6AL package.
BLOCK DIAGRAM
VDD
APPLICATIONS
Bias
EN
GND
Car Navigation
Personal Navigation Equipment
Mobile Phone with GPS
RF Front End Modules
RFOUT
RFIN
Digital Video Camera, Digital Camera
GNDRF
Figure 1. SGM13001C Block Diagram
SG Micro Corp
MAY 2023 – REV.A.2
www.sg-micro.com
SGM13001C
Low Noise Amplifier for GNSS
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
6R
XX
SGM13001C UTDFN-1.5×1.0-6AL
-40℃ to +85℃
SGM13001CYUGF6G/TR
Tape and Reel, 4000
MARKING INFORMATION
NOTE: XX = Date Code.
Serial Number
YY
X X
Date Code - Week
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
OVERSTRESS CAUTION
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
Supply Voltage, VDD.......................................... -0.3V to 4.0V
EN to GND........................................................ -0.3V to 4.0V
RFIN, RFOUT to GND ...................................... -0.3V to 0.3V
RF Input Power, PIN ....................................................10dBm
Junction Temperature.................................................+150℃
Storage Temperature Range.......................-55℃ to +150℃
Lead Temperature (Soldering, 10s)............................+260℃
ESD Susceptibility
ESD SENSITIVITY CAUTION
HBM.............................................................................4000V
CDM ..............................................................................500V
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
RECOMMENDED OPERATING CONDITIONS
Operating Temperature Range......................-40℃ to +85℃
Supply Voltage Range, VDD ................................1.6V to 3.6V
Operating Frequency Range, f0 ..........1550MHz to 1615MHz
Control Voltage High, VCTL_H.............................. 1.35V to VDD
Control Voltage Low, VCTL_L.................................0V to 0.45V
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, or specifications without prior notice.
SG Micro Corp
www.sg-micro.com
MAY 2023
2
SGM13001C
Low Noise Amplifier for GNSS
PIN CONFIGURATION
(TOP VIEW)
1
6
GNDRF
RFOUT
2
5
GND
EN
3
4
RFIN
VDD
UTDFN-1.5×1.0-6AL
PIN DESCRIPTION
PIN
1
NAME
FUNCTION
GNDRF RF Ground.
2
GND
RFIN
VDD
EN
Analog Ground.
3
LNA Input from Antenna.
Power Supply.
4
5
Active High Enable Input for the Device. Pull high enable, pull low into power down mode.
6
RFOUT LNA Output.
SG Micro Corp
www.sg-micro.com
MAY 2023
3
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
UTDFN-1.5×1.0-6AL
D
b
N6
L
E
N1
e
L1
PIN 1#
BOTTOM VIEW
TOP VIEW
0.20
C
SEATING PLANE
0.55
0.60
0.85
A
A2
A1
eee C
0.50
SIDE VIEW
RECOMMENDED LAND PATTERN (Unit: mm)
Dimensions In Millimeters
Symbol
MIN
MOD
MAX
0.600
0.050
A
A1
A2
b
0.500
0.000
-
-
0.127 REF
0.150
1.400
0.900
-
0.250
1.600
1.100
D
-
E
-
e
0.500 BSC
L
0.250
0.300
-
-
0.450
0.500
L1
eee
0.050
NOTE: This drawing is subject to change without notice.
SG Micro Corp
TX00300.000
www.sg-micro.com
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
UTDFN-1.5×1.0-6AL
7″
9.5
1.12
1.72
0.7
4.0
4.0
2.0
8.0
Q1
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
7″ (Option)
7″
368
442
227
410
224
224
8
18
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明