SGM2036-0.75 [SGMICRO]
300mA, Low Power, Low Dropout, RF Linear Regulator;型号: | SGM2036-0.75 |
厂家: | Shengbang Microelectronics Co, Ltd |
描述: | 300mA, Low Power, Low Dropout, RF Linear Regulator |
文件: | 总11页 (文件大小:567K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SGM2036-0.75
300mA, Low Power, Low Dropout,
RF Linear Regulator
GENERAL DESCRIPTION
FEATURES
The SGM2036-0.75 is a low noise, low voltage and low
dropout voltage linear regulator. It is capable of
supplying 300mA output current with typical dropout
voltage of only 950mV. The operating input voltage
range is from 1.6V to 5.5V. The fixed output voltage is
0.75V.
Operating Input Voltage Range: 1.6V to 5.5V
Fixed Output Voltage: 0.75V
300mA Guaranteed Output Current
High Output Voltage Accuracy
Low Dropout Voltage: 950mV (TYP) at 300mA
Low Output Noise
Low Supply Current: 20μA (TYP)
Shutdown Supply Current: 0.01μA (TYP)
Short Start-Up Time
Other features include logic-controlled shutdown mode,
short-circuit current limit and thermal shutdown
protection. The SGM2036-0.75 has automatic
discharge function to quickly discharge VOUT in the
disabled status.
Short Auto-Discharge Function
Thermal Shutdown Protection
Short-Circuit Current Limit
The SGM2036-0.75 is available in Green SOT-23-5
and UTDFN-1×1-4L packages. It operates over an
operating temperature range of -40℃ to +85℃.
Fast Load and Line Transient Responses
-40℃ to +85℃ Operating Temperature Range
Available in Green SOT-23-5 and UTDFN-1×1-4L
Packages
APPLICATIONS
Modems
Cellular Telephones
PCMCIA Cards
Palmtop Computers
Portable Electronics
TYPICAL APPLICATION
INPUT
INPUT
1.6V to 5.5V
1.6V to 5.5V
OUTPUT
OUTPUT
1
5
4
4
3
1
IN
OUT
IN
OUT
CIN
1μF
CIN
1μF
COUT
1μF
COUT
1μF
3
ON
ON
EN
EN
BP
GND
2
OFF
OFF
GND
2
CBP
0.01μF
SOT-23-5
UTDFN-1×1-4L
Figure 1. Typical Application Circuits
SG Micro Corp
www.sg-micro.com
NOVEMBER 2021 – REV. A.3
300mA, Low Power, Low Dropout,
RF Linear Regulator
SGM2036-0.75
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
SGM2036-0.75
SOT-23-5
SGM2036-0.75YN5G/TR
SGM2036-0.75YUDH4G/TR
MCEXX
G9
Tape and Reel, 3000
Tape and Reel, 10000
-40℃ to +85℃
-40℃ to +85℃
SGM2036-0.75 UTDFN-1×1-4L
MARKING INFORMATION
NOTE: XX = Date Code.
SOT-23-5
UTDFN-1×1-4L
YYY X X
YY
Date Code - Month
Date Code - Year
Serial Number
Serial Number
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
OVERSTRESS CAUTION
IN to GND ............................................................ -0.3V to 6V
Output Short-Circuit Duration.......................................Infinite
EN to GND........................................................... -0.3V to 6V
OUT, BP to GND.................................... -0.3V to (VIN + 0.3V)
Power Dissipation, PD @ TA = +25℃
SOT-23-5...................................................................390mW
UTDFN-1×1-4L ..........................................................400mW
Package Thermal Resistance
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
ESD SENSITIVITY CAUTION
SOT-23-5, θJA .......................................................... 285℃/W
UTDFN-1×1-4L, θJA ................................................. 280℃/W
Junction Temperature .................................................+150℃
Storage Temperature Range.........................-65℃ to +150℃
Lead Temperature (Soldering, 10s).............................+260℃
ESD Susceptibility
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure.
Precision integrated circuits may be more susceptible to
damage because even small parametric changes could
cause the device not to meet the published specifications.
HBM.............................................................................4000V
MM.................................................................................400V
CDM ............................................................................1000V
RECOMMENDED OPERATING CONDITIONS
Operating Voltage Range....................................1.6V to 5.5V
Enable Input Voltage Range ..................................0V to 5.5V
Input Effective Capacitance, CIN ......................... 0.1μF (MIN)
Output Effective Capacitance, COUT.................0.5μF to 10μF
Operating Junction Temperature Range .........-40℃ to +85℃
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, or specifications without prior notice.
SG Micro Corp
www.sg-micro.com
NOVEMBER 2021
2
300mA, Low Power, Low Dropout,
RF Linear Regulator
SGM2036-0.75
PIN CONFIGURATIONS
(TOP VIEW)
(TOP VIEW)
IN
EN
4
3
IN
GND
EN
1
2
3
5
4
OUT
BP
1
2
OUT
GND
SOT-23-5
UTDFN-1×1-4L
PIN DESCRIPTION
PIN
NAME
FUNCTION
SOT-23-5
UTDFN-1×1-4L
Input Voltage Supply Pin. It is recommended to use a 1μF or larger ceramic
capacitor from IN pin to ground. This ceramic capacitor should be placed as
close as possible to IN pin.
1
2
3
4
2
3
IN
GND
EN
Ground.
Enable Pin. Drive EN high to turn on the regulator. Drive EN low to turn off the
regulator. This pin must be pulled high by an external resistor connected to IN
pin if EN pin is not used.
Reference-Noise Bypass Pin. Bypass with an external capacitor CBP can
reduce output noise to very low level. The capacitor is recommended to be
placed very close to the pin for high PSRR.
Regulator Output Pin. It is recommended to use a ceramic capacitor with
effective capacitance in the range of 0.5μF to 10μF to get good power supply
decoupling. This ceramic capacitor should be placed as close as possible to
OUT pin.
Exposed Pad. Connect it to GND internally. Connect it to a large ground
plane to maximize thermal performance; this pad is not an electrical
connection point.
4
5
‒
‒
BP
OUT
‒
1
Exposed Pad
SG Micro Corp
www.sg-micro.com
NOVEMBER 2021
3
300mA, Low Power, Low Dropout,
RF Linear Regulator
SGM2036-0.75
ELECTRICAL CHARACTERISTICS
(VIN = 2.5V, Full = -40℃ to +85℃, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
TEMP
+25℃
+25℃
+25℃
+25℃
+25℃
+25℃
MIN
1.6
TYP
MAX
5.5
UNITS
V
Input Voltage
VIN
Output Voltage Accuracy
Maximum Output Current
Current Limit
IOUT = 0.1mA
-2.5
300
360
+2.5
%
mA
mA
µA
ILIM
IQ
560
20
Supply Pin Current
Dropout Voltage (1)
No load, VEN = VIN
IOUT = 300mA
26
VDROP
∆VOUT
950
1300
mV
Line Regulation
VIN = 1.6V to 5.5V, IOUT = 1mA
0.01
0.1
40
%/V
+25℃
∆V × VOUT
IN
Load Regulation
ΔVOUT
IOUT = 0.1mA to 300mA
VOUT = 0V
12
200
74
61
82
70
40
76
12
40
mV
mA
+25℃
+25℃
+25℃
+25℃
+25℃
+25℃
+25℃
+25℃
+25℃
+25℃
Short Current Limit
ISHORT
CBP = 0µF, IOUT = 30mA,
COUT = 1μF, VIN = 1.75V,
∆VRIPPLE = 0.2VP-P
f = 217Hz
f = 1kHz
f = 217Hz
f = 1kHz
Power Supply Rejection Ratio
Output Voltage Noise
PSRR
dB
CBP = 0.01μF, IOUT = 30mA,
COUT = 1μF, VIN = 1.75V,
∆VRIPPLE = 0.2VP-P
I
OUT = 0mA
IOUT = 30mA
OUT = 0mA
IOUT = 30mA
C
BP = 0µF, COUT = 1µF,
f = 10Hz to 100kHz
en
µVRMS
I
CBP = 0.01µF, COUT = 1µF,
f = 10Hz to 100kHz
Shutdown
VIH
VIL
Full
Full
Full
Full
Full
1.5
EN Input Threshold
V
IN = 1.6V to 5.5V
V
0.4
2
IBH
VEN = 5.5V
VEN = 0V
VEN = 0V
0.8
EN Input Bias Current
µA
IBL
0.01
0.01
1
Shutdown Supply Current
Start-Up Time
ISHDN
1
µA
µs
Ω
COUT = 1μF, no load, from assertion of VEN to
VOUT = 90% × VOUT (NOM)
tSTR
30
50
+25℃
+25℃
RON of Discharge MOSFET
Thermal Protection
VIN = 4.0V, VEN = 0V
Thermal Shutdown Temperature
Thermal Shutdown Hysteresis
TSHDN
140
15
℃
℃
ΔTSHDN
NOTE:
1. The dropout voltage is defined as the difference between VIN and VOUT when VOUT falls to VOUT(NOM) - 60mV for VIN = 2.5V.
SG Micro Corp
www.sg-micro.com
NOVEMBER 2021
4
300mA, Low Power, Low Dropout,
RF Linear Regulator
SGM2036-0.75
FUNCTIONAL BLOCK DIAGRAM
IN
OUT
Current Limit
R1
&
Sub-Regulator
Thermal Protection
R2
GND
RDIS
R3
Voltage
Reference
BP
C1
EN
Shutdown
SGM2036-0.75
Figure 2. Block Diagram
SG Micro Corp
www.sg-micro.com
NOVEMBER 2021
5
300mA, Low Power, Low Dropout,
RF Linear Regulator
SGM2036-0.75
APPLICATION INFORMATION
The SGM2036-0.75 is a low input voltage, ultra-low
noise and low dropout LDO and provides 300mA output
current. These features make the device a reliable
solution to solve many challenging problems in the
generation of clean and accurate power supply. The
high performance also makes the SGM2036-0.75
useful in a variety of applications. The SGM2036-0.75
provides the protection function for output overload,
output short -circuit condition and overheating.
automatic discharge function.
When the EN pin voltage is lower than 0.4V, the device
is in shutdown state, there is no current flowing from IN
to OUT pins. In this state, the automatic discharge
transistor is active to discharge the output voltage
through a 50Ω (TYP) resistor.
When the EN pin voltage is higher than 1.5V, the device
is in active state, the input voltage is regulated to the
output voltage and the automatic discharge transistor is
turned off.
The SGM2036-0.75 provides an EN pin as an external
chip enable control to enable/disable the device. When
the regulator is in shutdown state, the shutdown current
consumes as low as 0.04μA (TYP).
The EN pin is pulled down by internal 0.8μA (TYP)
current source when the EN pin is floated. This current
source will ensure the SGM2036-0.75 in shutdown
state and reduce the power dissipation in system.
Input Capacitor Selection (CIN)
The input decoupling capacitor is necessary to be
connected as close as possible to the IN pin for
ensuring the device stability. 1μF or greater X7R or
X5R ceramic capacitor is selected to get good dynamic
performance.
Output Current Limit and Short-Circuit
Protection
When overload events happen, the output current is
internally limited to 560mA (TYP). When the OUT pin is
shorted to ground, the short-circuit protection will limit
the output current to 200mA (TYP).
When VIN is required to provide large current
instantaneously, a large effective input capacitor is
required. Multiple input capacitors can limit the input
tracking inductance. Adding more input capacitors is
available to restrict the ringing and to keep it below the
device absolute maximum ratings.
Thermal Shutdown
The SGM2036-0.75 can detect the temperature of die.
When the die temperature exceeds the threshold value
of thermal shutdown, the SGM2036-0.75 will be in
shutdown state and it will remain in this state until the
die temperature decreases to +125℃.
Output Capacitor Selection (COUT
)
The output decoupling capacitor should be located as
close as possible to the OUT pin. 1μF or greater X7R or
X5R ceramic capacitor is selected to get good dynamic
performance. The minimum effective capacitance of
COUT that SGM2036-0.75 can remain stable is 0.5μF.
For ceramic capacitor, temperature, DC bias and
package size will change the effective capacitance, so
enough margin of COUT must be considered in design.
Larger capacitance and lower ESR COUT will help
improve the load transient response and increase the
high frequency PSRR.
Negatively Biased Output
When the output is negative voltage, the chip may not
start up due to parasitic effects. Ensure that the output
is greater than -0.3V under all conditions. If excessive
negatively biased output is expected in the application,
a Schottky diode can be added between the OUT pin
and GND pin.
Reverse Current
The pass transistor has an inherent body diode which
will be forward biased in the case when VOUT > (VIN
0.3V). If extended reverse voltage operation is
anticipated, external limiting might be appropriate.
+
Enable Control
The SGM2036-0.75 uses the EN pin to enable/disable
its device and to deactivate/activate the output
SG Micro Corp
www.sg-micro.com
NOVEMBER 2021
6
300mA, Low Power, Low Dropout,
RF Linear Regulator
SGM2036-0.75
REVISION HISTORY
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
NOVEMBER 2021 ‒ REV.A.2 to REV.A.3
Page
Updated Recommended Operating Conditions section............................................................................................................................................2
FEBRUARY 2021 ‒ REV.A.1 to REV.A.2
Page
Updated ABSOLUTE MAXIMUM RATINGS.............................................................................................................................................................2
JUNE 2019 ‒ REV.A to REV.A.1
Page
Added UTDFN-1×1-4L package..............................................................................................................................................................................All
Updated ABSOLUTE MAXIMUM RATINGS.............................................................................................................................................................2
Changes from Original (APRIL 2018) to REV.A
Page
Changed from product preview to production data .................................................................................................................................................All
SG Micro Corp
www.sg-micro.com
NOVEMBER 2021
7
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
SOT-23-5
1.90
D
e1
2.59
E1
E
0.99
b
e
0.95
0.69
RECOMMENDED LAND PATTERN (Unit: mm)
L
A
A1
c
θ
0.2
A2
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
1.250
0.100
1.150
0.500
0.200
3.020
1.700
2.950
MIN
MAX
0.049
0.004
0.045
0.020
0.008
0.119
0.067
0.116
A
A1
A2
b
1.050
0.000
1.050
0.300
0.100
2.820
1.500
2.650
0.041
0.000
0.041
0.012
0.004
0.111
0.059
0.104
c
D
E
E1
e
0.950 BSC
1.900 BSC
0.037 BSC
0.075 BSC
e1
L
0.300
0°
0.600
8°
0.012
0°
0.024
8°
θ
SG Micro Corp
www.sg-micro.com
TX00033.000
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
UTDFN-1×1-4L
e
D
D1
E1
E
f
b
L
BOTTOM VIEW
TOP VIEW
0.25
3-C0.18
0.48
A
0.2
45°
A1
A2
0.48
SIDE VIEW
0.65
RECOMMENDED LAND PATTERN (Unit: mm)
Dimensions
In Millimeters
Symbol
MIN
MOD
MAX
0.600
0.050
A
A1
A2
D
0.500
0.000
0.550
0.152 REF
1.000
0.950
0.450
0.950
0.450
0.175
1.050
0.550
1.050
0.550
0.275
D1
E
0.500
1.000
E1
b
0.500
0.225
e
0.625 BSC
0.195 REF
0.250
f
L
0.200
0.300
SG Micro Corp
TX00066.000
www.sg-micro.com
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
SOT-23-5
7″
7″
9.5
9.0
3.20
1.18
3.20
1.18
1.40
0.68
4.0
4.0
4.0
2.0
2.0
2.0
8.0
8.0
Q3
Q1
UTDFN-1×1-4L
SG Micro Corp
www.sg-micro.com
TX10000.000
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
7″ (Option)
7″
368
442
227
410
224
224
8
18
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明