SGM41100V [SGMICRO]
True Monolithic Li-Ion/Polymer Battery Protector in Tiny Thin Package;型号: | SGM41100V |
厂家: | Shengbang Microelectronics Co, Ltd |
描述: | True Monolithic Li-Ion/Polymer Battery Protector in Tiny Thin Package 电池 |
文件: | 总22页 (文件大小:947K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SGM41100V
True Monolithic Li-Ion/Polymer
Battery Protector in Tiny Thin Package
GENERAL DESCRIPTION
FEATURES
The SGM41100V is designed for primary protection of
Li-Ion/polymer rechargeable cells. The product integrates
all the protections required for safe operation of polymer
rechargeable cells. The device is packaged in a tiny and
thin package. Its small solution size leaves more space
for fitting the battery cell into a given cavity for small size
wearable devices.
● Ultra-Compact Protection Solution
● Pass Resistance: 42mΩ (TYP)
● Operation Current: 1.1μA (TYP)
● Factory Programmable OVP Threshold Options
4.20V to 4.575V with 0.025V per Step
● Charge/Discharge Over-Current Protection
3 Thresholds Combination Options
● Battery Under-Voltage Protection
2.6V/2.7V/2.8V/3.0V Options
The SGM41100V integrates all the protections and the
required low on-resistance disconnect switch on one
die. The protection features include charge and
discharge protection, detection and protection of a cell
in charge over-voltage, charge over-current, discharge
under-voltage and discharge over-current. Charge and
discharge are prohibited when the battery is lower than
the certain voltage and under-voltage. The product also
disconnects the battery pack in the case of deep
discharge.
● 50nA Deep Discharge Shutdown
● Input Surge Clamping
● Input Over-Voltage Safe
● Load Short-Circuit Safe
● Reverse Polarity Battery Safe
● Input Reversed-Attaching Safe
● Battery Pack Paralleling Safe
● Locked-Off for Delivery/Assembly
● Available in a Green UTDFN-1.5×2-6L Package
The SGM41100V operates in -40℃ to +85℃ temperature
range, and is in a thin and low profile UTDFN-1.5×2-6L
package. This package with a nominal height of 0.5mm
is convenient for small cell packing designs.
APPLICATIONS
IoT Gadgets
Wearable Devices
Battery Packs
TYPICAL APPLICATION
1
6
1μF
SGM
41100V
2
3
5
4
NOTE: The short-circuit of both ends (P and M) of the battery should be avoided during the battery assembly process.
Figure 1. Typical Application Circuit
SG Micro Corp
SEPTEMBER 2021 – REV. A. 1
www.sg-micro.com
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
PACKAGE/ORDERING INFORMATION
SPECIFIED
PACKAGE
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
TEMPERATURE
RANGE
DESCRIPTION
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
RE2
XXX
SGM41100V-420M01YUDT6G/TR
SGM41100V-420M02YUDT6G/TR
SGM41100V-420M04YUDT6G/TR
SGM41100V-420N01YUDT6G/TR
SGM41100V-420N02YUDT6G/TR
SGM41100V-420N04YUDT6G/TR
SGM41100V-420O01YUDT6G/TR
SGM41100V-420O02YUDT6G/TR
SGM41100V-420O04YUDT6G/TR
SGM41100V-420P01YUDT6G/TR
SGM41100V-420P02YUDT6G/TR
SGM41100V-420P04YUDT6G/TR
SGM41100V-423M01YUDT6G/TR
SGM41100V-423M02YUDT6G/TR
SGM41100V-423M04YUDT6G/TR
SGM41100V-423N01YUDT6G/TR
SGM41100V-423N02YUDT6G/TR
SGM41100V-423N04YUDT6G/TR
SGM41100V-423O01YUDT6G/TR
SGM41100V-423O02YUDT6G/TR
SGM41100V-423O04YUDT6G/TR
SGM41100V-423P01YUDT6G/TR
SGM41100V-423P02YUDT6G/TR
SGM41100V-423P04YUDT6G/TR
SGM41100V-425M01YUDT6G/TR
SGM41100V-425M02YUDT6G/TR
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
SGM41100V-420M01
SGM41100V-420M02
SGM41100V-420M04
SGM41100V-420N01
SGM41100V-420N02
SGM41100V-420N04
SGM41100V-420O01
SGM41100V-420O02
SGM41100V-420O04
SGM41100V-420P01
SGM41100V-420P02
SGM41100V-420P04
SGM41100V-423M01
SGM41100V-423M02
SGM41100V-423M04
SGM41100V-423N01
SGM41100V-423N02
SGM41100V-423N04
SGM41100V-423O01
SGM41100V-423O02
SGM41100V-423O04
SGM41100V-423P01
SGM41100V-423P02
SGM41100V-423P04
SGM41100V-425M01
SGM41100V-425M02
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
RE3
XXX
RE4
XXX
RE5
XXX
RE6
XXX
RE7
XXX
RE8
XXX
RE9
XXX
REA
XXX
REB
XXX
REC
XXX
RED
XXX
REE
XXX
REF
XXX
RF0
XXX
RF1
XXX
RF2
XXX
RF3
XXX
RF4
XXX
RF5
XXX
RF6
XXX
RF7
XXX
RF8
XXX
RF9
XXX
RFA
XXX
RFB
XXX
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
2
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
RFC
XXX
SGM41100V-425M04YUDT6G/TR
SGM41100V-425N01YUDT6G/TR
SGM41100V-425N02YUDT6G/TR
SGM41100V-425N04YUDT6G/TR
SGM41100V-425O01YUDT6G/TR
SGM41100V-425O02YUDT6G/TR
SGM41100V-425O04YUDT6G/TR
SGM41100V-425P01YUDT6G/TR
SGM41100V-425P02YUDT6G/TR
SGM41100V-425P04YUDT6G/TR
SGM41100V-428M01YUDT6G/TR
SGM41100V-428M02YUDT6G/TR
SGM41100V-428M04YUDT6G/TR
SGM41100V-428N01YUDT6G/TR
SGM41100V-428N02YUDT6G/TR
SGM41100V-428N04YUDT6G/TR
SGM41100V-428O01YUDT6G/TR
SGM41100V-428O02YUDT6G/TR
SGM41100V-428O04YUDT6G/TR
SGM41100V-428P01YUDT6G/TR
SGM41100V-428P02YUDT6G/TR
SGM41100V-428P04YUDT6G/TR
SGM41100V-430M01YUDT6G/TR
SGM41100V-430M02YUDT6G/TR
SGM41100V-430M04YUDT6G/TR
SGM41100V-430N01YUDT6G/TR
SGM41100V-430N02YUDT6G/TR
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
SGM41100V-425M04
SGM41100V-425N01
SGM41100V-425N02
SGM41100V-425N04
SGM41100V-425O01
SGM41100V-425O02
SGM41100V-425O04
SGM41100V-425P01
SGM41100V-425P02
SGM41100V-425P04
SGM41100V-428M01
SGM41100V-428M02
SGM41100V-428M04
SGM41100V-428N01
SGM41100V-428N02
SGM41100V-428N04
SGM41100V-428O01
SGM41100V-428O02
SGM41100V-428O04
SGM41100V-428P01
SGM41100V-428P02
SGM41100V-428P04
SGM41100V-430M01
SGM41100V-430M02
SGM41100V-430M04
SGM41100V-430N01
SGM41100V-430N02
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
RFD
XXX
RFE
XXX
RFF
XXX
RG0
XXX
RG1
XXX
RG2
XXX
RG3
XXX
RG4
XXX
RG5
XXX
RG6
XXX
RG7
XXX
RG8
XXX
RG9
XXX
RGA
XXX
RGB
XXX
RGC
XXX
RGD
XXX
RGE
XXX
RGF
XXX
RH0
XXX
RH1
XXX
RH2
XXX
RH3
XXX
RH4
XXX
RH5
XXX
RH6
XXX
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
3
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
RH7
XXX
SGM41100V-430N04YUDT6G/TR
SGM41100V-430O01YUDT6G/TR
SGM41100V-430O02YUDT6G/TR
SGM41100V-430O04YUDT6G/TR
SGM41100V-430P01YUDT6G/TR
SGM41100V-430P02YUDT6G/TR
SGM41100V-430P04YUDT6G/TR
SGM41100V-433M01YUDT6G/TR
SGM41100V-433M02YUDT6G/TR
SGM41100V-433M04YUDT6G/TR
SGM41100V-433N01YUDT6G/TR
SGM41100V-433N02YUDT6G/TR
SGM41100V-433N04YUDT6G/TR
SGM41100V-433O01YUDT6G/TR
SGM41100V-433O02YUDT6G/TR
SGM41100V-433O04YUDT6G/TR
SGM41100V-433P01YUDT6G/TR
SGM41100V-433P02YUDT6G/TR
SGM41100V-433P04YUDT6G/TR
SGM41100V-435M01YUDT6G/TR
SGM41100V-435M02YUDT6G/TR
SGM41100V-435M04YUDT6G/TR
SGM41100V-435N01YUDT6G/TR
SGM41100V-435N02YUDT6G/TR
SGM41100V-435N04YUDT6G/TR
SGM41100V-435O01YUDT6G/TR
SGM41100V-435O02YUDT6G/TR
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
SGM41100V-430N04
SGM41100V-430O01
SGM41100V-430O02
SGM41100V-430O04
SGM41100V-430P01
SGM41100V-430P02
SGM41100V-430P04
SGM41100V-433M01
SGM41100V-433M02
SGM41100V-433M04
SGM41100V-433N01
SGM41100V-433N02
SGM41100V-433N04
SGM41100V-433O01
SGM41100V-433O02
SGM41100V-433O04
SGM41100V-433P01
SGM41100V-433P02
SGM41100V-433P04
SGM41100V-435M01
SGM41100V-435M02
SGM41100V-435M04
SGM41100V-435N01
SGM41100V-435N02
SGM41100V-435N04
SGM41100V-435O01
SGM41100V-435O02
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
RH8
XXX
RH9
XXX
RHA
XXX
R48
XXX
R49
XXX
R4A
XXX
RHB
XXX
RHC
XXX
RHD
XXX
RHE
XXX
RHF
XXX
RI0
XXX
RI1
XXX
RI2
XXX
RI3
XXX
RI4
XXX
RI5
XXX
RI6
XXX
RI7
XXX
RI8
XXX
RI9
XXX
RIA
XXX
RIB
XXX
RIC
XXX
RID
XXX
RIE
XXX
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
4
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
RIF
XXX
SGM41100V-435O04YUDT6G/TR
SGM41100V-435P01YUDT6G/TR
SGM41100V-435P02YUDT6G/TR
SGM41100V-435P04YUDT6G/TR
SGM41100V-438M01YUDT6G/TR
SGM41100V-438M02YUDT6G/TR
SGM41100V-438M04YUDT6G/TR
SGM41100V-438N01YUDT6G/TR
SGM41100V-438N02YUDT6G/TR
SGM41100V-438N04YUDT6G/TR
SGM41100V-438O01YUDT6G/TR
SGM41100V-438O02YUDT6G/TR
SGM41100V-438O04YUDT6G/TR
SGM41100V-438P01YUDT6G/TR
SGM41100V-438P02YUDT6G/TR
SGM41100V-438P04YUDT6G/TR
SGM41100V-440M01YUDT6G/TR
SGM41100V-440M02YUDT6G/TR
SGM41100V-440M04YUDT6G/TR
SGM41100V-440N01YUDT6G/TR
SGM41100V-440N02YUDT6G/TR
SGM41100V-440N04YUDT6G/TR
SGM41100V-440O01YUDT6G/TR
SGM41100V-440O02YUDT6G/TR
SGM41100V-440O04YUDT6G/TR
SGM41100V-440P01YUDT6G/TR
SGM41100V-440P02YUDT6G/TR
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
SGM41100V-435O04
SGM41100V-435P01
SGM41100V-435P02
SGM41100V-435P04
SGM41100V-438M01
SGM41100V-438M02
SGM41100V-438M04
SGM41100V-438N01
SGM41100V-438N02
SGM41100V-438N04
SGM41100V-438O01
SGM41100V-438O02
SGM41100V-438O04
SGM41100V-438P01
SGM41100V-438P02
SGM41100V-438P04
SGM41100V-440M01
SGM41100V-440M02
SGM41100V-440M04
SGM41100V-440N01
SGM41100V-440N02
SGM41100V-440N04
SGM41100V-440O01
SGM41100V-440O02
SGM41100V-440O04
SGM41100V-440P01
SGM41100V-440P02
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
RJ0
XXX
RJ1
XXX
RJ2
XXX
RJ3
XXX
RJ4
XXX
RJ5
XXX
RJ6
XXX
RJ7
XXX
RJ8
XXX
RJ9
XXX
RJA
XXX
RJB
XXX
RJC
XXX
RJD
XXX
RJE
XXX
RJF
XXX
RK0
XXX
RK1
XXX
RK2
XXX
RK3
XXX
RK4
XXX
RK5
XXX
RK6
XXX
RK7
XXX
RK8
XXX
RK9
XXX
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
5
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
RKA
XXX
SGM41100V-440P04YUDT6G/TR
SGM41100V-443M01YUDT6G/TR
SGM41100V-443M02YUDT6G/TR
SGM41100V-443M04YUDT6G/TR
SGM41100V-443N01YUDT6G/TR
SGM41100V-443N02YUDT6G/TR
SGM41100V-443N04YUDT6G/TR
SGM41100V-443O01YUDT6G/TR
SGM41100V-443O02YUDT6G/TR
SGM41100V-443O04YUDT6G/TR
SGM41100V-443P01YUDT6G/TR
SGM41100V-443P02YUDT6G/TR
SGM41100V-443P04YUDT6G/TR
SGM41100V-445M01YUDT6G/TR
SGM41100V-445M02YUDT6G/TR
SGM41100V-445M04YUDT6G/TR
SGM41100V-445N01YUDT6G/TR
SGM41100V-445N02YUDT6G/TR
SGM41100V-445N04YUDT6G/TR
SGM41100V-445O01YUDT6G/TR
SGM41100V-445O02YUDT6G/TR
SGM41100V-445O04YUDT6G/TR
SGM41100V-445P01YUDT6G/TR
SGM41100V-445P02YUDT6G/TR
SGM41100V-445P04YUDT6G/TR
SGM41100V-448M01YUDT6G/TR
SGM41100V-448M02YUDT6G/TR
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
SGM41100V-440P04
SGM41100V-443M01
SGM41100V-443M02
SGM41100V-443M04
SGM41100V-443N01
SGM41100V-443N02
SGM41100V-443N04
SGM41100V-443O01
SGM41100V-443O02
SGM41100V-443O04
SGM41100V-443P01
SGM41100V-443P02
SGM41100V-443P04
SGM41100V-445M01
SGM41100V-445M02
SGM41100V-445M04
SGM41100V-445N01
SGM41100V-445N02
SGM41100V-445N04
SGM41100V-445O01
SGM41100V-445O02
SGM41100V-445O04
SGM41100V-445P01
SGM41100V-445P02
SGM41100V-445P04
SGM41100V-448M01
SGM41100V-448M02
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
RKB
XXX
RKC
XXX
RKD
XXX
RKE
XXX
RKF
XXX
RL0
XXX
RL1
XXX
RL2
XXX
RL3
XXX
RL4
XXX
RL5
XXX
RL6
XXX
RL7
XXX
RL8
XXX
RL9
XXX
RLA
XXX
RLB
XXX
RLC
XXX
RLD
XXX
RLE
XXX
RLF
XXX
RM0
XXX
RM1
XXX
RM2
XXX
RM3
XXX
RM4
XXX
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
6
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
RM5
XXX
SGM41100V-448M04YUDT6G/TR
SGM41100V-448N01YUDT6G/TR
SGM41100V-448N02YUDT6G/TR
SGM41100V-448N04YUDT6G/TR
SGM41100V-448O01YUDT6G/TR
SGM41100V-448O02YUDT6G/TR
SGM41100V-448O04YUDT6G/TR
SGM41100V-448P01YUDT6G/TR
SGM41100V-448P02YUDT6G/TR
SGM41100V-448P04YUDT6G/TR
SGM41100V-450M01YUDT6G/TR
SGM41100V-450M02YUDT6G/TR
SGM41100V-450M04YUDT6G/TR
SGM41100V-450N01YUDT6G/TR
SGM41100V-450N02YUDT6G/TR
SGM41100V-450N04YUDT6G/TR
SGM41100V-450O01YUDT6G/TR
SGM41100V-450O02YUDT6G/TR
SGM41100V-450O04YUDT6G/TR
SGM41100V-450P01YUDT6G/TR
SGM41100V-450P02YUDT6G/TR
SGM41100V-450P04YUDT6G/TR
SGM41100V-453M01YUDT6G/TR
SGM41100V-453M02YUDT6G/TR
SGM41100V-453M04YUDT6G/TR
SGM41100V-453N01YUDT6G/TR
SGM41100V-453N02YUDT6G/TR
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
SGM41100V-448M04
SGM41100V-448N01
SGM41100V-448N02
SGM41100V-448N04
SGM41100V-448O01
SGM41100V-448O02
SGM41100V-448O04
SGM41100V-448P01
SGM41100V-448P02
SGM41100V-448P04
SGM41100V-450M01
SGM41100V-450M02
SGM41100V-450M04
SGM41100V-450N01
SGM41100V-450N02
SGM41100V-450N04
SGM41100V-450O01
SGM41100V-450O02
SGM41100V-450O04
SGM41100V-450P01
SGM41100V-450P02
SGM41100V-450P04
SGM41100V-453M01
SGM41100V-453M02
SGM41100V-453M04
SGM41100V-453N01
SGM41100V-453N02
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
RM6
XXX
RM7
XXX
RM8
XXX
RM9
XXX
RMA
XXX
RMB
XXX
RMC
XXX
RMD
XXX
RME
XXX
RMF
XXX
RN0
XXX
RN1
XXX
RN2
XXX
RN3
XXX
RN4
XXX
RN5
XXX
RN6
XXX
RN7
XXX
RN8
XXX
RN9
XXX
RNA
XXX
RNB
XXX
RNC
XXX
RND
XXX
RNE
XXX
RNF
XXX
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
7
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
RO0
XXX
SGM41100V-453N04YUDT6G/TR
SGM41100V-453O01YUDT6G/TR
SGM41100V-453O02YUDT6G/TR
SGM41100V-453O04YUDT6G/TR
SGM41100V-453P01YUDT6G/TR
SGM41100V-453P02YUDT6G/TR
SGM41100V-453P04YUDT6G/TR
SGM41100V-455M01YUDT6G/TR
SGM41100V-455M02YUDT6G/TR
SGM41100V-455M04YUDT6G/TR
SGM41100V-455N01YUDT6G/TR
SGM41100V-455N02YUDT6G/TR
SGM41100V-455N04YUDT6G/TR
SGM41100V-455O01YUDT6G/TR
SGM41100V-455O02YUDT6G/TR
SGM41100V-455O04YUDT6G/TR
SGM41100V-455P01YUDT6G/TR
SGM41100V-455P02YUDT6G/TR
SGM41100V-455P04YUDT6G/TR
SGM41100V-458M01YUDT6G/TR
SGM41100V-458M02YUDT6G/TR
SGM41100V-458M04YUDT6G/TR
SGM41100V-458N01YUDT6G/TR
SGM41100V-458N02YUDT6G/TR
SGM41100V-458N04YUDT6G/TR
SGM41100V-458O01YUDT6G/TR
SGM41100V-458O02YUDT6G/TR
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
SGM41100V-453N04
SGM41100V-453O01
SGM41100V-453O02
SGM41100V-453O04
SGM41100V-453P01
SGM41100V-453P02
SGM41100V-453P04
SGM41100V-455M01
SGM41100V-455M02
SGM41100V-455M04
SGM41100V-455N01
SGM41100V-455N02
SGM41100V-455N04
SGM41100V-455O01
SGM41100V-455O02
SGM41100V-455O04
SGM41100V-455P01
SGM41100V-455P02
SGM41100V-455P04
SGM41100V-458M01
SGM41100V-458M02
SGM41100V-458M04
SGM41100V-458N01
SGM41100V-458N02
SGM41100V-458N04
SGM41100V-458O01
SGM41100V-458O02
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
RO1
XXX
RO2
XXX
RO3
XXX
RO4
XXX
RO5
XXX
RO6
XXX
RO7
XXX
RO8
XXX
RO9
XXX
ROA
XXX
ROB
XXX
ROC
XXX
ROD
XXX
ROE
XXX
ROF
XXX
RP0
XXX
RP1
XXX
RP2
XXX
RP3
XXX
RP4
XXX
RP5
XXX
RP6
XXX
RP7
XXX
RP8
XXX
RP9
XXX
RPA
XXX
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
8
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
RPB
XXX
SGM41100V-458O04YUDT6G/TR
SGM41100V-458P01YUDT6G/TR
SGM41100V-458P02YUDT6G/TR
SGM41100V-458P04YUDT6G/TR
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
SGM41100V-458O04
SGM41100V-458P01
SGM41100V-458P02
SGM41100V-458P04
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
UTDFN-1.5×2-6L
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
RPC
XXX
RPD
XXX
RPE
XXX
MARKING INFORMATION
NOTE: XXX = Date Code and Trace Code.
Serial Number
Y Y Y
X X X
Trace Code
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
DEVICE DESCRIPTION
Model : SGM41100V-AAABCC
Over-Voltage Threshold Options
Option Code "AAA"
420
4.20
440
423
4.225
443
425
4.25
445
428
4.275
448
430
4.30
450
433
4.325
453
435
4.35
455
438
4.375
458
Over-Voltage Threshold
VOV (V)
Option Code "AAA"
Over-Voltage Threshold
VOV (V)
4.40
4.425
4.45
4.475
4.50
4.525
4.55
4.575
Under-Voltage Threshold Options
N
Option Code "B"
M
O
P
Under-Voltage Threshold
VUV (V)
2.6
2.7
2.8
3.0
Current Threshold Combination Options
Option Code "CC"
01
02
04
Charge Over-Current
IOC (A)
Discharge Over-Current
IOD (A)
0.156
0.19
0.35
0.56
0.169
0.30
Short-Circuit Current (A)
4 × 0.169
4 × 0.30
4 × 0.56
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
9
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING CONDITIONS
Supply Voltage Range..............................................0V to 6V
Battery Voltage Range ............................................ 0 to 4.5V
Junction Temperature Range ........................ -40℃ to +85℃
PCKP to PCKN, 13V (1), 10mA Clamping (2) ........................5s
PCKP to PCKN...........................-4.5V or +9V (3), Continuous
PCKP to BATN ............................................-4.5V (3) or +5.5V
PCKP to PCKN Short-Circuit (4)............................ Continuous
PCKP to PCKN Attachment Inrush/Outrush (5)....... +9V/-4.5V
PCKP to BATN Attachment Inrush/Outrush (6) ..............±4.5V
Surge Current (7) ............................................................±20A
Junction Temperature.................................................+150℃
Storage Temperature Range.......................-65℃ to +150℃
Lead Temperature (Soldering, 10s)............................+260℃
ESD Susceptibility
OVERSTRESS CAUTION
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
HBM.............................................................................4000V
CDM ............................................................................1000V
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
NOTES:
1. Evaluation at VBAT = 4.5V.
2. The clamping may reach 10mA at an input voltage > 13V.
3. Test with a voltage regulated supply that has 2A current
limit and increase the voltage progressively for less than
1V/ms slope rate. Apply a voltage to the device under test
from 0V to given voltages.
4. The device is tested after being installed on the circuit
board in Figure 1. Clip a 4.5V 5A power source onto the P
and M to simulate a battery and short the Pack P and the
Pack N with an 80mΩ wire.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
5. The device is tested after being installed on the circuit
board in Figure 1. Connect a 3.2V supply and 2A sinking
resistor RSINK as showed in Figure 2 to the P and M for inrush
test. Clip a 4.5V 5A supply for outrush test.
circuit design, or specifications without prior notice.
6. The device is tested after being installed on the circuit
board in Figure 1 with the circuit in Figure 3.
7. Parallel or connect in reverse polarity two battery packs of
Figure 1. Limit the battery pack impedance to limit the surge
current to 20A.
Outrush Inrush
CBAT
100μF
Inrush test: to Pack P
RSLMT RSRC 80mΩ
P
Outrush test: to Pack N
Pack P
Power Source
Outrush Test: 4.5V
Inrush Test: 9V
The DUT
in Figure 1
Circuit
Power Source
Inrush Test: 3.2V
Outrush Test: 4.5V
CSRC
100μF
RSINK
M
Pack N
(No Battery)
RSLMT
Inrush test: 0Ω
Outrush test: 4.5Ω
:
RSINK:
Inrush test: 1.6Ω
Inrush test: to Pack N
Outrush test: to Pack P
Outrush test: open
Figure 2. Test Set-Up for Pack P to Pack N Attachment Inrush/Outrush
Outrush Inrush
Inrush test: to N
RSRC 80mΩ RSLMT 4.5Ω
P
Pack P
Outrush test: to P
The DUT
in Figure 1
Circuit
CLOAD
100μF
Power Source
4.5V
CSRC
100μF
RLOAD
M
Pack N
(No Battery)
Inrush test: to P
Outrush test: to N
Figure 3. Test Set-Up for Pack P to BATN Attachment Inrush/Outrush
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
10
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
PIN CONFIGURATION
(TOP VIEW)
PCKP
1
2
3
6
5
4
BYPS
PCKN
PCKN
BATN
BATN
NC
UTDFN-1.5×2-6L
PIN DESCRIPTION
PIN
NAME
TYPE
FUNCTION
1
PCKP
P
Internal Connection. No external connection.
Power Input and Output, the Battery Pack Cathode. Short this pin to BATN pin to
release off the locked-open state, and make the output path closed.
2, 3
4, 5
PCKN
BATN
P
G
Ground of Internal Circuit. Connect to the battery cathode end.
Power Supply Pin and Disconnection Locked-Off Triggering Input. Place a 1μF
capacitor between this pin and BATN pin, and place a 1kΩ resistor between the pin
and the positive connection of the battery pack.
6
BYPS
NC
P
Shorting this pin to PCKN pin momentarily places the circuit into locked-open state.
Exposed
Pad
NC
Not Connected Internally. Connect to BATN pin externally is recommended.
NOTE: G = Ground, P = Power for the Circuit, NC = Not Connected.
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
11
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
ELECTRICAL CHARACTERISTICS
(TJ = +25℃, ICHG = IDIS = 200mA, VBAT = 3.7V, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
4.220
4.235
4.255
4.245
4.260
4.280
4.270
4.285
4.305
4.295
4.310
4.330
4.320
4.335
4.355
4.345
4.360
4.380
4.370
4.385
4.405
4.395
4.410
4.430
4.420
4.435
4.455
4.445
4.460
4.480
4.470
4.485
4.505
4.495
4.510
4.530
4.520
4.535
4.555
UNITS
4.180
4.165
4.145
4.205
4.190
4.170
4.230
4.215
4.195
4.255
4.240
4.220
4.280
4.265
4.245
4.305
4.290
4.270
4.330
4.315
4.295
4.355
4.340
4.320
4.380
4.365
4.345
4.405
4.390
4.370
4.430
4.415
4.395
4.455
4.440
4.420
4.480
4.465
4.445
TJ = +25℃
SGM41100V-420_ _ _
SGM41100V-423_ _ _
SGM41100V425_ _ _
SGM41100V-428_ _ _
SGM41100V-430_ _ _
SGM41100V-433_ _ _
SGM41100V-435_ _ _
SGM41100V-438_ _ _
SGM41100V-440_ _ _
SGM41100V-443_ _ _
SGM41100V-445_ _ _
SGM41100V-448_ _ _
SGM41100V-450_ _ _
4.200
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
4.225
4.250
4.275
4.300
4.325
4.350
4.375
4.400
4.425
4.450
4.475
4.500
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
Charge Over-Voltage Threshold
VOV
V
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
12
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
ELECTRICAL CHARACTERISTICS (continued)
(TJ = +25℃, ICHG = IDIS = 200mA, VBAT = 3.7V, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
4.505
4.490
4.470
4.530
4.515
4.495
4.555
4.540
4.520
100
TYP
MAX
4.545
4.560
4.580
4.570
4.585
4.605
4.595
4.610
4.630
200
UNITS
TJ = +25℃
SGM41100V-453_ _ _
SGM41100V-455_ _ _
4.525
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
Charge Over-Voltage Threshold
VOV
4.550
4.575
V
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
SGM41100V-458_ _ _
Charger voltage is
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
OV Release Hysteresis
VOVHYS lower than battery
voltage
150
mV
95
205
TJ = -40℃ to +85℃
TJ = +25℃
2.545
2.515
2.645
2.615
2.745
2.715
2.945
2.915
75
2.655
2.685
2.755
2.785
2.855
2.885
3.055
3.085
125
SGM41100V-_ _
SGM41100V-_ _
SGM41100V-_ _
SGM41100V-_ _
_
M_ _
N_ _
O_ _
P_ _
2.600
2.700
2.800
3.000
100
TJ = -40℃ to +85℃
TJ = +25℃
_
_
_
TJ = -40℃ to +85℃
TJ = +25℃
Battery Under-Voltage Threshold (1)
VUV
V
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -40℃ to +85℃
TJ = +25℃
When a charging
supply is applied
UV Release Hysteresis
Shutdown Voltage
VUVHYS
mV
V
70
130
TJ = -40℃ to +85℃
1.40
1.95
TJ = +25℃
VSHDN
1.67
1.18
2.15
TJ = -40℃ to +85℃
TJ = +25℃
2.43
2.57
Charging Prohibition Voltage (1)
VNOCHG
2.5
V
2.40
2.60
TJ = -40℃ to +85℃
0.140
0.105
0.270
0.225
0.500
0.435
0.130
0.100
0.165
0.120
0.310
0.250
0.200
0.235
0.330
0.375
0.620
0.685
0.200
0.225
0.215
0.260
0.390
0.450
TJ = +25℃
SGM41100V-_ _
SGM41100V-_ _
SGM41100V-_ _
SGM41100V-_ _
SGM41100V-_ _
SGM41100V-_ _
_
_
_
_
_
_
_ 01
_ 02
_ 04
_ 01
_ 02
_ 04
0.169
0.300
0.560
0.156
0.190
0.350
TJ = -40℃ to +85℃
TJ = +25℃
Discharge Over-Current
IOD
A
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -40℃ to +85℃
TJ = +25℃
Charge Over-Current
IOC
A
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -40℃ to +85℃
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
13
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
ELECTRICAL CHARACTERISTICS (continued)
(TJ = +25℃, ICHG = IDIS = 200mA, VBAT = 3.7V, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
52
UNITS
TJ = +25℃
Pass Resistance
RP
42
mΩ
62
TJ = -40℃ to +85℃
TJ = +25℃
1.5
2.0
Operating Current
Shutdown Current
IOP
1.1
μA
TJ = -40℃ to +85℃
The stable current
flowing into the device
when it is in any of
following shutdown
conditions that the
battery voltage is lower
0.05
0.30
TJ = +25℃
ISHDN
μA
than VUV (then VSHDN
,
VNOCHG if the battery
voltage further drops), TJ = -40℃ to +85℃
the device is set into
latched-off
923
537
115
67
1209
1342
188
208
113
125
609
676
113
125
0.5
TJ = +25℃
Over-Voltage Detection Delay (2)
tOVPD
tUVPD
tODD
1066
144
80
ms
ms
ms
ms
ms
TJ = -40℃ to +85℃
TJ = +25℃
Under-Voltage Detection Delay (2)
TJ = -40℃ to +85℃
TJ = +25℃
57
Discharge Over-Current Detection Delay (2)
Discharge Over-Current Retry Time (2)
Charge Over-Current Detection Delay (2)
33
TJ = -40℃ to +85℃
TJ = +25℃
461
268
57
tRETRY
528
80
TJ = -40℃ to +85℃
TJ = +25℃
tOCD
33
TJ = -40℃ to +85℃
TJ = +25℃
0.196
0.14
Discharge Short-Circuit Detection Delay
Discharge Short-Circuit Current
NOTES:
tOCSD
ISC
0.3
ms
A
0.7
TJ = -40℃ to +85℃
4 × IOD
1. VUV and VSHDN variation seat in the same side deviation and no range overlaps.
2. The TYP value and MAX value are combination of the detection delay time and a possible polling period of about 32ms, while
the MIN value represents the minimum detection delay with portion of a polling period added, as the pass path cutting action is
synchronized to the internal polling.
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
14
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
TYPICAL PERFORMANCE CHARACTERISTICS
TJ = +25℃, ICHG = IDIS = 50mA, VBAT = 3.7V, unless otherwise noted.
Normalized Charge Over-Voltage vs. Charge Current
Normalized Charge Over-Voltage vs. Temperature
1.5%
1.0%
0.5%
0.0%
-0.5%
-1.0%
-1.5%
0.6%
0.4%
0.2%
0.0%
-0.2%
-0.4%
-0.6%
Normalized to ICHG = 0.035A at TJ = +25℃
Normalized to ICHG = 0.035A at TJ = +25℃
ICHG = 0.035A
I
I
CHG = 0.135A
CHG = 0.235A
0
0.05
0.1
0.15
0.2
0.25
0.3
-10
0
10 20 30 40 50 60 70 80 90
Charge Current (A)
Temperature (℃)
Normalized Charge Over-Current vs. Battery Voltage
Normalized Charge Over-Current vs. Temperature
3%
2%
3.0%
2.0%
1.0%
0.0%
-1.0%
-2.0%
-3.0%
Normalized to VBAT = 3.7V at TJ = +25℃
Normalized to VBAT = 3.7V at TJ = +25℃
1%
0%
-1%
-2%
-3%
VBAT = 3.7V
V
V
BAT = 4.0V
BAT = 4.3V
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5
Battery Voltage (V)
-10
0
10 20 30 40 50 60 70 80 90
Temperature (℃)
Normalized Discharge Over-Current vs. Battery Voltage
3%
Normalized Discharge Over-Current vs. Temperature
1.5%
1.0%
0.5%
0.0%
-0.5%
-1.0%
-1.5%
Normalized to VBAT = 3.7V at TJ = +25℃
Normalized to VBAT = 3.7V at TJ = +25℃
2%
1%
0%
-1%
-2%
-3%
VBAT = 3.7V
V
V
BAT = 4.0V
BAT = 4.3V
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5
Battery Voltage (V)
-10
0
10 20 30 40 50 60 70 80 90
Temperature (℃)
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
15
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
TJ = +25℃, ICHG = IDIS = 50mA, VBAT = 3.7V, unless otherwise noted.
On-Resistance vs. Battery Voltage
On-Resistance vs. Discharge Current
VBAT = 3.7V
44.0
43.5
43.0
42.5
42.0
41.5
41.0
43.8
43.6
43.4
43.2
43.0
42.8
42.6
42.4
42.2
42.0
41.8
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5
Battery Voltage (V)
0
0.1
0.2
0.3
0.4
0.5
Discharge Current (A)
On-Resistance vs. Temperature
VBAT = 3.7V
60
55
50
45
40
35
30
-10
0
10 20 30 40 50 60 70 80 90
Temperature (℃)
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
16
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
DETAILED DESCRIPTION
The SGM41100V monitors voltage and current applied
on battery cell connected between PCKP and BATN,
and opens the connection between battery and pack
terminal with its internal switches when a fault condition
is detected.
Current Related Protections
When discharge over-current condition occurs and
keeps for discharge over-current detection delay (tODD),
the discharge path opens. The path closes again after
tRETRY for retrying. The SGM41100V keeps retrying until
the over-current condition is released or the battery
discharges to low when the SGM41100V turns into
battery under-voltage protection state.
Voltage Related Protections
When battery voltage reaches over-voltage threshold
(VOV), the charge path is open-circuit. The path closes
again when the charger voltage is lower than battery
voltage and the battery voltage falls back about VOVHYS
below the over-voltage threshold (VOV).
During a charging condition if a charge over-current is
identified, the SGM41100V enters the locked-off state.
This state can be reset by charger removal (pack
removal).
In order to protect the battery from discharge
under-voltage status when battery voltage falls below
VUV for tUVPD or VSHDN instantly, the discharge path is
open-circuit, the device enters into shutdown with only
very low resistive leakage flowing into it, which helps to
keep the battery from harmful exhausted condition as
long as possible. The path closes again when a
charging supply is applied and the battery voltage rises
to about VUVHYS above the VUV threshold.
Short-circuit protection: When discharge current
exceeds the over-current threshold, discharge path
disconnects instantly in tOCSD, in order to protect the
battery from potential over-current stress. After this
disconnection, the SGM41100V stays in the locked-off
non-conducting state until being reactivated.
Burst load outrush: In many systems, overload
conditions will occur momentarily. The device allows for
this short duration discharge condition by allowing the
discharge path to remain closed even after a discharge
over-current is detected for duration of discharge
over-current detection delay.
Charge an exhausted battery: While the battery is
over-discharged the battery could be in the following
states.
a) Battery voltage below VNOCHG: The charge path or
discharge path is open correspondingly when the
applied bias condition is settled.
When a charge over-current condition is identified, and
after charge over-current detection deglitch, the charge
path is cut off. The device restores to the conducting
state when the PCKP to PCKN voltage drops about
3mV lower than the battery voltage.
b) Battery voltage is in the range of VNOCHG to VUV (if
there is such voltage gap): The path switch is on for
144ms (tUVPD) in every 132ms and off for 2ms when
charge current flows through the body diode. During
this period, the charger will see the terminal voltage
steps up/down.
Parallel battery packs: When paralleling two battery
packs utilizing SGM41100Vs, a momentary current
surge may cause charge over-current protection in the
pack with the lower voltage. The higher voltage pack
can enter a discharge over-current protection. The
charge over-current or discharge over-current protection
resets only after the higher voltage battery pack
discharges to a voltage slightly lower than the lower
c) Battery voltage above under-voltage threshold: In
this condition, the chip enters normal operation and
charge and discharge modes are allowed.
When battery voltage is between VSHDN and VNOCHG
there is about 150μs circuit settle time when a pulse
charge current may flow through.
,
voltage pack. After this discharge, both packs will
conduct.
When the battery voltage is in the range of 0.5V ~ 0.7V,
and the external voltage applied on the device is also
too low to start full operation, the charging current flows
through the path switch's body diode.
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
17
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
DETAILED DESCRIPTION (continued)
It is highly recommended that the packs should be
placed into a locked-open non-conducting state first (by
connecting PCKP to PCKN momentarily) before being
paralleled to avoid current overstress. When a charge
supply is applied to the paralleled packs, the
locked-open state will release.
of guided discharge path is desired for the equipment
case sealing air-gap discharge over the battery and
those connect to the battery closely.
Caution on electrochemical corrosion: As a battery
can apply potential over the electrodes continuously
and cause electrochemical corrosion, the corrosion
product may spread in the hollow beneath a surface
mount device and cause leakage. Moisture-proof
coating is recommended, especially when using
compact devices.
Battery delivery state: It is recommended to deliver a
battery pack in a locked-off non-conducting state to
avoid unintentional shorting during production handling
or transportation. The circuit of Figure 1 places the
SGM41100V into a locked-off state after battery
attachment by momentarily shorting BYPS and PCKN.
Cautions for Evaluation Test
Some types of electronic load simulators may have
excessive inrush current, and some BPM testers may
have voltage transition surges, which may trigger the
protection of the SGM41100V. Careful attention is
required for doing such evaluations with these kinds of
equipment. External voltage and current limits within
the conditions specified in the Absolute Maximum
Ratings section of this datasheet are required.
Pack activation: In order to release the pack from
locked-off state and to place it into a conducting state,
apply a charging input, or connect PCKN to BATN
momentarily.
Caution: The battery short or load side terminal short
outside the protection circuit′s loop during battery
attaching may cause excessive high surge current and
excessive high current-breaking voltage surge, which
may cause damage or degrade the life duration of
battery and protection circuit. It is recorded that the
accidental anode to ground plane shorting causes
heavy surge, which can actually be avoided by leaving
enough clearance around the anode pad on PCB or
soldering/attaching the anode firstly in assembly (as the
short between cathode to ground will not cause
excessive surge).
Select Protection Parameters
Battery models from different vendors may be
customized for different applications. Consult the
battery vendor for protection limits for specific battery
model.
Parameters for the protection circuit and of the charger
circuit affecting same variables should be set for proper
charge or discharge protection sequence. For example,
the over-voltage threshold of the battery should be
50mV ~ 100mV higher than constant voltage threshold
of the charger.
Surge, ESD and Reversed Attachment
The SGM41100V absorbs voltage surge applied
between PCKP and PCKN, by passing the surge
current through its switch and the battery. Surge may
occur when attaching the pack or battery cell.
Cautions on parameter misalignment: If the VOV is
lower than the full charge voltage of the battery charger,
the protection circuit cuts off the battery charge path
before the battery is fully charged, and turns into the
non-conductive locked-off state; if the IOC is lower than
the charge current, the protection circuit also turns itself
into the locked-off state. In either VOV or IOC, the charger
input should be removed and then reapplied for
activating the protection circuit from the locked-off state
to the conducting state. If the charger is not removed
after a VOV or IOV event, the battery will not be charged
even if the battery voltage is depleted.
The SGM41100V survives either if a cell is placed in
reverse or a charge input is attached in reverse, but not
both at the same time. Any of these reverse
attachments, short circuits, inrush surges and outrush
will cause overstress. Do not test those cases in normal
production inspection, as this kind of test itself may
cause performance degradation or even damage the
device.
Caution about ESD damage to the battery: The
battery pack might be the biggest element in equipment
and induce much during an ESD event. Careful design
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
18
True Monolithic Li-Ion/Polymer
SGM41100V
Battery Protector in Tiny Thin Package
REVISION HISTORY
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
SEPTEMBER 2021 ‒ REV.A to REV.A.1
Page
Updated Electrical Characteristics section.........................................................................................................................................................14
Changes from Original (APRIL 2021) to REV.A
Page
Changed from product preview to production data.............................................................................................................................................All
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
19
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
UTDFN-1.5×2-6L
D
e
N6
D1
L
E1
E
k
N3
N1
b1
b
BOTTOM VIEW
TOP VIEW
1.10
0.55
A
0.90
2.60
A1
A2
SIDE VIEW
0.25
0.50
RECOMMENDED LAND PATTERN (Unit: mm)
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
0.600
0.050
MIN
0.020
0.000
MAX
0.024
0.002
A
A1
A2
D
0.500
0.000
0.152 REF
0.006 REF
1.400
1.000
1.900
0.800
1.600
1.200
2.100
1.000
0.055
0.039
0.075
0.031
0.063
0.047
0.083
0.039
D1
E
E1
k
0.300 REF
0.012 REF
b
0.200
0.200
0.300
0.300
0.008
0.008
0.012
0.012
b1
e
0.180 REF
0.500 BSC
0.007 REF
0.020 BSC
L
SG Micro Corp
www.sg-micro.com
TX00115.001
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
UTDFN-1.5×2-6L
7″
9.5
1.70
2.30
0.75
4.0
4.0
2.0
8.0
Q2
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
7″ (Option)
7″
368
442
227
410
224
224
8
18
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明