SGM44601 [SGMICRO]
4Ω, High Speed, Low Voltage, Dual, DPDT Analog Switch;
| 型号： | SGM44601 |
| 厂家： | 
Shengbang Microelectronics Co, Ltd |
| 描述： | 4Ω, High Speed, Low Voltage, Dual, DPDT Analog Switch 光电二极管 |
| 文件： | 总12页 (文件大小：624K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SGM44601
4Ω, High Speed, Low Voltage
Dual, DPDT Analog Switch
GENERAL DESCRIPTION
FEATURES
The SGM44601 is a dual-independent, double-pole/
double-throw (DPDT), TTL/CMOS compatible analog
switch. It operates from a 1.8V to 5.5V single power
supply.
● Single Supply Voltage Range: 1.8V to 5.5V
● -3dB Bandwidth: 300MHz
● Low On-Resistance: 4Ω (TYP)
● Low On-Resistance Flatness
● High Off-Isolation: -75dB at 1MHz
● Low Crosstalk: -100dB at 1MHz
● Fast Switching Times (V+ = 5V):
The SGM44601 features high-speed, low on-resistance,
low voltage and high bandwidth. The high performances
make it very suitable for multiple applications, such as
portable equipment, audio and video signal routing, etc.
In addition, the SGM44601 can be used as a dual
bidirectional 2-to-1 multiplexer/demultiplexer because it
has logic control inputs. Low power consumption is also
one of the important reasons that make it a good
choice.
t
t
ON: 36ns
OFF: 30ns
● Rail-to-Rail Input and Output Operation
● TTL/CMOS Compatible
● -40℃ to +85℃ Operating Temperature Range
● Available in a Green TQFN-2.6×1.8-16L Package
The SGM44601 is available in a Green TQFN-2.6×1.8-16L
package. It operates over an ambient temperature
range of -40℃ to +85℃.
APPLICATIONS
Cellular Phones
Portable Equipment
Medical Equipment
Sample-and-Hold Circuits
Personal Digital Assistants
Battery-Powered Systems
Audio and Video Signal Routing
SG Micro Corp
MAY 2016 – REV. A. 4
www.sg-micro.com
4Ω, High Speed, Low Voltage
Dual, DPDT Analog Switch
SGM44601
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
44601
XXXXX
SGM44601 TQFN-2.6×1.8-16L
SGM44601YTQA16/TR
Tape and Reel, 3000
-40℃ to +85℃
MARKING INFORMATION
NOTE: XXXXX = Date Code and Vendor Code.
X X X X X
Vendor Code
Date Code - Week
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
OVERSTRESS CAUTION
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
V+ to GND.................................................................0V to 6V
Analog, Digital Voltage Range................ -0.3V to (V+) + 0.3V
Continuous Current NO, NC, or COM.......................±100mA
Junction Temperature.................................................+150℃
Storage Temperature Range.......................-65℃ to +150℃
Lead Temperature (Soldering, 10s)............................+260℃
ESD SENSITIVITY CAUTION
RECOMMENDED OPERATING CONDITIONS
Supply Voltage Range ........................................1.8V to 5.5V
Operating Temperature Range ......................-40℃ to +85℃
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because very small parametric changes could cause the
device not to meet its published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, or specifications without prior notice.
SG Micro Corp
www.sg-micro.com
MAY 2016
2
4Ω, High Speed, Low Voltage
Dual, DPDT Analog Switch
SGM44601
PIN CONFIGURATION
(TOP VIEW)
COM4 NO4 IN3-IN4 NC3
12
11
10
9
13
14
8
7
COM3
NO3
NC4
V+
15
16
6
5
GND
NC2
NO1
COM1
1
2
3
4
COM2
NC1 IN1-IN2 NO2
TQFN-2.6×1.8-16L
PIN DESCRIPTION
PIN
1, 5, 9, 13
2, 10
NAME
NCX
INX
FUNCTION
Normally Closed Pins.
Digital Control Input Pin to Connect the COM Pins to the NO or NC Pins.
6
GND
V+
Ground.
14
Positive Power Supply Pin.
Normally Open Pins.
Common Pins.
15, 3, 7, 11
16, 4, 8, 12
NOX
COMX
NOTE: NOX, NCX and COMX pins may be an input or output.
FUNCTION TABLE
FUNCTION
IN1-IN2
NC1 and NC2
NO1 and NO2
0
1
ON
OFF
ON
OFF
FUNCTION
IN3-IN4
NC3 and NC4
NO3 and NO4
0
1
ON
OFF
ON
OFF
SG Micro Corp
www.sg-micro.com
MAY 2016
3
4Ω, High Speed, Low Voltage
Dual, DPDT Analog Switch
SGM44601
ELECTRICAL CHARACTERISTICS
(V+ = 4.5V to 5.5V, GND = 0V, VIH = 1.6V, VIL = 0.5V, Full = -40℃ to +85℃. Typical values are at V+ = 5V, TA = +25℃, unless
otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
TEMP
MIN
TYP MAX UNITS
Analog Switch
Analog Signal Range
On-Resistance
VNO, VNC, VCOM
RON
Full
+25℃
Full
0
V+
6
V
Ω
Ω
Ω
Ω
Ω
Ω
4
0.4
2
V+ = 4.5V, 0V ≤ VNO or VNC ≤ V+,
I
COM = -100mA, Test Circuit 1
7
2.5
3
+25℃
Full
On-Resistance Match
Between Channels
V+ = 4.5V, 0V ≤ VNO or VNC ≤ V+,
COM = -100mA, Test Circuit 1
∆RON
I
3
+25℃
Full
V+ = 4.5V, 0V ≤ VNO or VNC ≤ V+,
COM = -100mA, Test Circuit 1
On-Resistance Flatness
RFLAT(ON)
I
3.5
V+ = 5.5V, VNO or VNC = 3.3V/0.3V,
COM = 0.3V/3.3V
Source Off Leakage Current
Channel On Leakage Current
INC(OFF), INO(OFF)
Full
Full
1
1
μA
μA
V
INC(ON), INO(ON)
,
V+ = 5.5V, VCOM = 0.3V/3.3V,
NO or VNC = 0.3V/3.3V or floating
ICOM(ON)
V
Digital Inputs
Input High Voltage
Input Low Voltage
Input Leakage Current
Dynamic Characteristics
Turn-On Time
VINH
VINL
IIN
Full
Full
Full
1.6
V
V
0.5
1
V+ = 5.5V, VIN = 0V or 5.5V
μA
tON
36
30
ns
ns
+25℃
+25℃
V
NC or VNO = 3V, RL = 300Ω,
CL = 35pF, Test Circuit 2
Turn-Off Time
tOFF
VNC or VNO = 3V, RL = 300Ω,
CL = 35pF, Test Circuit 4
Break-Before-Make Time Delay
Charge Injection
tD
Q
16
ns
+25℃
+25℃
VS = GND, RS = 0Ω, CL = 1nF,
Q = CL × VOUT, Test Circuit 3
3.5
pC
1MHz
-75
-55
+25℃
+25℃
+25℃
+25℃
+25℃
Signal = 0dBm, RL = 50Ω,
Test Circuit 5
Off Isolation
OISO
dB
dB
10MHz
1MHz
-100
-60
Signal = 0dBm, RL = 50Ω,
Test Circuit 6
Channel-to-Channel Crosstalk
XTALK
BW
10MHz
-3dB Bandwidth
Signal = 0dBm, RL = 50Ω, Test Circuit 7
300
MHz
pF
CNC(ON), CNO(ON)
,
Channel On Capacitance
43.2
+25℃
CCOM(ON)
Power Requirements
Power Supply Range
Power Supply Current
V+
I+
Full
Full
1.8
5.5
1
V
V+ = 5.5V, VIN = 0V or V+
μA
SG Micro Corp
www.sg-micro.com
MAY 2016
4
4Ω, High Speed, Low Voltage
Dual, DPDT Analog Switch
SGM44601
ELECTRICAL CHARACTERISTICS (continued)
(V+ = 2.7V to 3.6V, VIH = 1.6V, VIL = 0.4V, Full = -40℃ to +85℃. Typical values are at V+ = 3V, TA = +25℃, unless otherwise
noted.)
PARAMETER
SYMBOL
CONDITIONS
TEMP
MIN
TYP MAX UNITS
Analog Switch
Analog Signal Range
On-Resistance
VNO, VNC, VCOM
RON
Full
+25℃
Full
0
V+
15
18
3
V
Ω
Ω
Ω
Ω
Ω
Ω
10
1
V+ = 2.7V, 0V ≤ VNO or VNC ≤ V+,
I
COM = -100mA, Test Circuit 1
+25℃
Full
On-Resistance Match
Between Channels
V+ = 2.7V, 0V ≤ VNO or VNC ≤ V+,
COM = -100mA, Test Circuit 1
∆RON
I
4
6
9
+25℃
Full
V+ = 2.7V, 0V ≤ VNO or VNC ≤ V+,
COM = -100mA, Test Circuit 1
On-Resistance Flatness
RFLAT(ON)
I
12
V+ = 3.6V, VNO or VNC = 3.3V/0.3V,
COM = 0.3V/3.3V
Source Off Leakage Current
Channel On Leakage Current
INC(OFF), INO(OFF)
Full
Full
1
1
μA
μA
V
INC(ON), INO(ON)
,
V+ = 3.6V, VCOM = 0.3V/3.3V,
NO or VNC = 0.3V/3.3V or floating
ICOM(ON)
V
Digital Inputs
Input High Voltage
Input Low Voltage
Input Leakage Current
Dynamic Characteristics
Turn-On Time
VINH
VINL
IIN
Full
Full
Full
1.5
V
V
0.4
1
V+ = 2.7V, VIN = 0V or 2.7V
μA
tON
45
44
ns
ns
+25℃
+25℃
V
NC or VNO = 1.5V, RL = 300Ω,
CL = 35pF, Test Circuit 2
Turn-Off Time
tOFF
VNC or VNO = 1.5V, RL = 300Ω,
CL = 35pF, Test Circuit 4
Break-Before-Make Time Delay
Charge Injection
tD
Q
23
ns
+25℃
+25℃
VS = GND, RS = 0Ω, CL = 1nF,
Q = CL × VOUT, Test Circuit 3
2.6
pC
1MHz
-75
-55
+25℃
+25℃
+25℃
+25℃
+25℃
Signal = 0dBm, RL = 50Ω,
Test Circuit 5
Off Isolation
OISO
dB
dB
10MHz
1MHz
-100
-60
Signal = 0dBm, RL = 50Ω,
Test Circuit 6
Channel-to-Channel Crosstalk
XTALK
BW
10MHz
-3dB Bandwidth
Signal = 0dBm, RL = 50Ω, Test Circuit 7
300
MHz
pF
CNC(ON), CNO(ON)
,
Channel On Capacitance
43.2
+25℃
CCOM(ON)
SG Micro Corp
www.sg-micro.com
MAY 2016
5
4Ω, High Speed, Low Voltage
Dual, DPDT Analog Switch
SGM44601
TYPICAL PERFORMANCE CHARACTERISTICS
On Response vs. Frequency
On Response vs. Frequency
3
0
3
0
V+ = +4.2V
V+ = +3V
TA = +25℃
TA = +25℃
-3
-6
-9
-3
-6
-9
0.1
1
10
100
1000
0.1
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
Response vs. Frequency
Response vs. Frequency
20
0
20
0
-20
-40
-60
-80
-100
-120
-140
-20
-40
-60
-80
-100
-120
-140
OFF-ISOLATION
OFF-ISOLATION
CROSSTALK
CROSSTALK
V+ = +4.2V
V+ = +3V
TA = +25℃
TA = +25℃
0.01
0.1
1
10
100
1000
0.01
0.1
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
SG Micro Corp
www.sg-micro.com
MAY 2016
6
4Ω, High Speed, Low Voltage
Dual, DPDT Analog Switch
SGM44601
TEST CIRCUITS
ICOM
V1
NO or NC
COM
VNO or VNC
IN
GND
RON = V1/ICOM
Test Circuit 1. On-Resistance
V+
V+
tR < 5ns
tF < 5ns
0.1μF
50%
50%
V+
VIN
0V
NO or NC
IN
COM
VOUT
VNO or VNC
VNO or VNC
VOUT
90%
90%
RL
CL
GND
VIN
0V
tOFF
tON
Test Circuit 1. Switching Times (tON, tOFF
)
V+
0.1μF
V
+
V+
VIN
tR < 5ns
tF < 5ns
RS
NO or NC
IN
COM
0V
VOUT
VS
CL
VOUT
ΔVOUT
GND
VIN
Q = ΔVOUT × CL
Test Circuit 2. Charge Injection
SG Micro Corp
www.sg-micro.com
MAY 2016
7
4Ω, High Speed, Low Voltage
Dual, DPDT Analog Switch
SGM44601
TEST CIRCUITS (continued)
V+
tR < 5ns
tF < 5ns
V
+
0.1μF
V+
VIN
0V
50%
NC
VNO or VNC
COM
VOUT
NO
VNO or VNC
VOUT
90%
IN
RL
CL
GND
VIN
0V
tD
Test Circuit 4. Break-Before-Make Time Delay (tD)
V+
0.1μF
V+
VIN
50Ω
NO or NC
COM
IN
50Ω
VOUT
Network
Analyzer
50Ω
GND
CL
Test Circuit 3. Off Isolation
V+
0.1μF
V+
COM
NO or NC
VIN
50Ω
IN1
CL
RL
IN2
Network
Analyzer
VOUT
50Ω
NO or NC
COM
N.C.
RL
CL
GND
Channel-to-Channel Crosstalk = -20 log (VNO or VNC/VOUT
)
Test Circuit 4. Channel-to-Channel Crosstalk
SG Micro Corp
www.sg-micro.com
MAY 2016
8
4Ω, High Speed, Low Voltage
Dual, DPDT Analog Switch
SGM44601
TEST CIRCUITS (continued)
V+
0.1μF
V+
VIN
50Ω
NO or NC
IN
COM
VOUT
Network
Analyzer
50Ω
GND
CL
Test Circuit 5. -3dB Bandwidth
REVISION HISTORY
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
MAY 2016 ‒ REV.A.3 to REV.A.4
Page
Updated Tape and Reel Information section ......................................................................................................................................................11
JANUARY 2013 ‒ REV.A.2 to REV.A.3
Page
Added Recommended Land Pattern Information ..............................................................................................................................................10,
Added Tape and Reel Information................................................................................................................................................................11, 12
MAY 2011 ‒ REV.A.1 to REV.A.2
Page
Updated Package Description ...........................................................................................................................................................................All
DECEMBER 2008 ‒ REV.A to REV.A.1
Page
Changed Absolute Maximum Ratings section......................................................................................................................................................2
Changes from Original (MAY 2008) to REV.A
Page
Changed from product preview to production data.............................................................................................................................................All
SG Micro Corp
www.sg-micro.com
MAY 2016
9
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
TQFN-2.6×1.8-16L
2.600± 0.050
0.400± 0.050
0.400 TYP
PIN #1 IDENTIFICATION
(×15)
CHAMFER 0.100×45
°
1.800± 0.050
1.200 Ref.
0.500± 0.050
N16
N2
N1
0.200± 0.050
PIN #1 DOT
BY MARKING
BOTTOM VIEW
TOP VIEW
3.2
1.8
0.750± 0.050
1.0
2.4
0.050± 0.050
0.203 Ref.
0.8
0.7
SIDE VIEW
0.4
0.2
RECOMMENDED LAND PATTERN
NOTE: All linear dimensions are in millimeters.
SG Micro Corp
TX00078.001
www.sg-micro.com
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
TQFN-2.6×1.8-16L
7″
9.0
2.01
2.81
0.93
4.0
4.0
2.0
8.0
Q1
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
7″ (Option)
7″
368
442
227
410
224
224
8
18
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号：
SGM44602
4Ω, High Speed, Low Voltage, Dual, DPDT Analog SwitchWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SGMICRO
SGM44603
4.5Ω, High Speed, Low Voltage, Quad, SPDT Analog SwitchWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SGMICRO
SGM447
1.5V Dual-Gain Analog Temperature Sensor with Class-AB OutputWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SGMICRO
SGM4511
Quad SPST CMOS Analog SwitchWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SGMICRO
SGM4512
Quad SPST CMOS Analog SwitchWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SGMICRO
SGM4514
70V RF Antenna Switch DriverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SGMICRO
SGM4517
0.9Ω, High Voltage, Dual, SPDT Analog SwitchWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SGMICRO
SGM4518
36V High Voltage, CMOS Analog MultiplexerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SGMICRO
SGM4519
36V High Voltage, CMOS Analog MultiplexerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SGMICRO
SGM4520
36V High Voltage, CMOS Analog SwitchWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SGMICRO
SGM4546
Dual-Channel, High Speed, High SPL Piezo-Sounder DriverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SGMICRO
SGM4547
High Speed Piezo-Sounder and Ultra-Sound Transducer DriverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SGMICRO
©2020 ICPDF网 联系我们和版权申明