SGM4574 [SGMICRO]
4-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications;型号: | SGM4574 |
厂家: | Shengbang Microelectronics Co, Ltd |
描述: | 4-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications |
文件: | 总9页 (文件大小:693K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SGM4574
4-Bit Bidirectional Voltage-Level Translator
for Open-Drain and Push-Pull Applications
GENERAL DESCRIPTION
FEATURES
The SGM4574 is a 4-bit, non-inverting, bidirectional
voltage-level translator which features two independent
configurable power-supply lines. The A and B ports
track the VCCA supply and VCCB supply respectively. The
supply voltage range is 1.65V to 5.5V for A ports and
2.3V to 5.5V for B ports. The device provides a
bidirectional translation function between the different
voltage nodes (including 1.8V, 2.5V, 3.3V and 5V).
● Power Supply Voltage Ranges (VCCA ≤ VCCB
A Ports: 1.65V to 5.5V
)
B Ports: 2.3V to 5.5V
● Direction-Control Signal is Not Required
● Data Rates
Push-Pull: 24Mbps
Open-Drain: 2Mbps
● No Specific Power Sequences Required for VCCA
and VCCB
The SGM4574 has an output enable (OE) function,
which controls the inputs and outputs states. When OE
goes low, all I/Os enter into the high-impedance state.
The OE should be connected to GND via a pull-down
resistor, and the minimum resistor value is depended on
the current source capability of the driver.
● -40℃ to +85℃ Operating Temperature Range
● Available in Green UTQFN-1.8×1.8-12L,
TQFN-2×2-12L and SOIC-14 Packages
APPLICATIONS
Smart Phones
Portable Devices
Handheld Devices
PC/Tablet
The SGM4574 features the OE input circuit which is
referenced to VCCA
.
The SGM4574 is available in Green UTQFN-1.8×1.8-12L,
TQFN-2×2-12L and SOIC-14 packages. It operates over
an ambient temperature range of -40℃ to +85℃.
TYPICAL APPLICATION
3.3V
1.8V
0.1μF
0.1μF
VCCA
OE
VCCB
1.8V
3.3V
Controller
Controller
SGM4574
A1
B1
B2
B3
B4
A2
A3
A4
I/O
I/O
GND
GND
GND
Figure 1. Typical Application Circuit
SG Micro Corp
JUNE 2018 – REV, A
www.sg-micro.com
4-Bit Bidirectional Voltage-Level Translator
for Open-Drain and Push-Pull Applications
SGM4574
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
4574
XXXX
UTQFN-1.8×1.8-12L
TQFN-2×2-12L
SOIC-14
SGM4574YUQN12G/TR
SGM4574YTQM12G/TR
SGM4574YS14G/TR
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 2500
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
4574
XXXX
SGM4574
SGM4574YS14
XXXXX
MARKING INFORMATION
NOTE: XXXX = Date Code. XXXXX = Date Code and Vendor Code.
X X X X
X X X X X
Vendor Code
Date Code - Week
Date Code - Year
Date Code - Week
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
OVERSTRESS CAUTION
ESD SENSITIVITY CAUTION
Stresses beyond those listed may cause permanent damage
to the device. Functional operation of the device at these or
any otherconditions beyond those indicated in the operational
sectionof thespecification is not implied. Exposureto absolute
maximum rating conditions for extended periods may affect
reliability.
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because very small parametric changes could cause the
device not to meet its published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuitdesign, specificationor other related things if necessary
without notice at any time.
SG Micro Corp
www.sg-micro.com
JUNE 2018
2
4-Bit Bidirectional Voltage-Level Translator
for Open-Drain and Push-Pull Applications
SGM4574
ABSOLUTE MAXIMUM RATINGS
Supply Voltage Range
RECOMMENDED OPERATING CONDITIONS
(3) (4)
VCCA ................................................................... -0.3V to 6V
Supply Voltage Range (5)
VCCB ................................................................... -0.3V to 6V
VCCA ................................................................1.65V to 5.5V
VCCB ..................................................................2.3V to 5.5V
High-Level Input Voltage, VIH
(1)
A Ports, B Ports, OE Input Voltage Range, VI
............................................................................. -0.3V to 6V
Output Voltage Range for the High-Impedance or Power-Off
A Port I/Os (VCCA = 1.65V, VCCB = 2.3V to 5.5V)
................................................................ VCCI - 0.1V to VCCI
A Port I/Os (VCCA = 1.95V to 5.5V, VCCB = 2.3V to 5.5V)
................................................................ VCCI - 0.4V to VCCI
B Port I/Os............................................... VCCI - 0.4V to VCCI
OE Input ................................................VCCA × 0.8V to 5.5V
Low-Level Input Voltage, VIL
(1)
State, VO
A Ports............................................................... -0.3V to 6V
B Ports............................................................... -0.3V to 6V
(1) (2)
Output Voltage Range for the High or Low State, VO
A Ports.................................................-0.3V to VCCA + 0.3V
B Ports.................................................-0.3V to VCCB + 0.3V
Input Clamp Current, IIK (VI < 0)...................................-50mA
Output Clamp Current, IOK (VO < 0)..............................-25mA
Continuous Output Current, IO ....................................±50mA
Continuous Current through VCCA, VCCB, or GND......±100mA
Junction Temperature.................................................+150℃
Storage Temperature Range........................-65℃ to +150℃
Lead Temperature (Soldering, 10s)............................+260℃
ESD Susceptibility
A Port I/Os.........................................................0V to 0.15V
B Port I/Os.........................................................0V to 0.15V
OE Input .................................................0V to VCCA × 0.25V
Operating Temperature Range...................... -40℃ to +85℃
NOTES:
3. VCCI is the supply voltage associated with the input ports.
4. VCCO is the supply voltage associated with the output ports.
5. Ensure that VCCA ≤ VCCB and VCCA must not exceed 5.5V.
HBM.............................................................................4000V
MM.................................................................................300V
CDM ............................................................................1000V
NOTES:
1. When the input and output current ratings are observed,
the input and I/O negative voltage ratings may be exceeded.
2. VCCA and VCCB values are shown in the recommended
operating conditions table.
SG Micro Corp
www.sg-micro.com
JUNE 2018
3
4-Bit Bidirectional Voltage-Level Translator
for Open-Drain and Push-Pull Applications
SGM4574
PIN CONFIGURATIONS
(TOP VIEW)
(TOP VIEW)
VCCA
VCCB
B1
10
B1
12
B2
B3
B4
9
12
11
10
11
9
8
B2
B3
A1
A2
1
2
VCCB
OE
1
2
8
7
GND
VCCA
GND
A3
3
7
B4
3
4
5
6
4
5
6
A1
A2
A3
A4
A4
GND
OE
UTQFN-1.8×1.8-12L
TQFN-2×2-12L
(TOP VIEW)
VCCA
A1
1
2
3
4
5
6
7
14 VCCB
B1
12 B2
13
A2
B3
B4
11
10
9
A3
A4
NC
GND
NC
OE
8
SOIC-14
PIN DESCRIPTION
PIN
NAME TYPE
FUNCTION
TQFN-
2×2-12L 1.8×1.8-12L
UTQFN-
SOIC-14
1
2
3
4
–
5
3
4
5
6
–
7
2
3
A1
A2
I/O
I/O
I/O
I/O
–
Input/Output 1. It tracks the VCCA supply.
Input/Output 2. It tracks the VCCA supply.
Input/Output 3. It tracks the VCCA supply.
Input/Output 4. It tracks the VCCA supply.
No Connection. Not internally connected.
Ground.
4
A3
5
A4
6, 9
7
NC
GND
S
Output Enable Control Pin. Active high. When OE goes low, all outputs
enter into the high-impedance state. It tracks the VCCA supply.
6
8
8
OE
I
7
8
9
10
11
12
13
14
B4
B3
I/O
I/O
I/O
I/O
S
Input/Output 4. It tracks the VCCB supply.
10
11
12
1
Input/Output 3. It tracks the VCCB supply.
9
B2
Input/Output 2. It tracks the VCCB supply.
10
11
B1
Input/Output 1. It tracks the VCCB supply.
VCCB
Supply Voltage on B Ports. It can be operated from 2.3V to 5.5V.
Supply Voltage on A Ports. It can be operated from 1.65V to 5.5V, and
12
2
–
1
–
VCCA
GND
S
–
VCCA is always ≤ VCCB
.
Exposed
Pad
Exposed pad should be soldered to PCB board and connected to GND
or left floating.
SG Micro Corp
www.sg-micro.com
JUNE 2018
4
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
TQFN-2×2-12L
NOTE: All linear dimensions are in millimeters.
SG Micro Corp
TX00075.000
www.sg-micro.com
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
UTQFN-1.8×1.8-12L
NOTE: All linear dimensions are in millimeters.
SG Micro Corp
TX00092.000
www.sg-micro.com
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
SOIC-14
D
E
E1
5.2
2.2
e
b
0.6
1.27
RECOMMENDED LAND PATTERN (Unit: mm)
L1
h
h
L
R1
R
A3
A2
A
L2
θ
A1
Dimensions
Dimensions
In Millimeters
In Inches
Symbol
MIN
1.35
0.10
1.25
0.55
0.36
8.53
5.80
3.80
MAX
1.75
0.25
1.65
0.75
0.49
8.73
6.20
4.00
MIN
MAX
0.069
0.010
0.065
0.030
0.019
0.344
0.244
0.157
A
A1
A2
A3
b
0.053
0.004
0.049
0.022
0.014
0.336
0.228
0.150
D
E
E1
e
1.27 BSC
0.050 BSC
L
0.45
0.80
0.018
0.032
L1
L2
R
1.04 REF
0.25 BSC
0.040 REF
0.01 BSC
0.07
0.07
0.30
0°
0.003
0.003
0.012
0°
R1
h
0.50
8°
0.020
8°
θ
SG Micro Corp
www.sg-micro.com
TX00011.001
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
TQFN-2×2-12L
UTQFN-1.8×1.8-12L
SOIC-14
7″
7″
9.5
9.0
2.30
2.10
6.60
2.30
2.10
9.30
0.90
0.80
2.10
4.0
4.0
4.0
4.0
4.0
8.0
2.0
2.0
2.0
8.0
8.0
Q2
Q2
Q1
13″
16.4
16.0
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
7″ (Option)
368
442
386
227
410
280
224
224
370
8
18
5
7″
13″
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明