SGM4588 [SGMICRO]
8-CH High-Performance CMOS Analog Multiplexer;型号: | SGM4588 |
厂家: | Shengbang Microelectronics Co, Ltd |
描述: | 8-CH High-Performance CMOS Analog Multiplexer |
文件: | 总7页 (文件大小:429K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SGM4588/9
8-CH/Dual 4-CH High-Performance
CMOS Analog Multiplexers
GENERAL DESCRIPTION
FEATURES
The SGM4588 is an 8-channel single-ended CMOS
analog multiplexer. The SGM4589 is a dual 4-channel
differential CMOS analog multiplexer. The SGM4588
has eight input terminals and a common output terminal,
which is determined by the 3-bit binary address (A0, A1,
A2). The SGM4589 has four differential input terminals
and a common output terminal, which is determined by
its 2-bit binary address (A0, A1).
● ±4.5V to ±20V Dual Supply Operation
● 4.5V to 40V Single Supply Operation
● Low On-Resistance: 23Ω (TYP)
● Low Charge Injection: 18pC
● Fast Transition Time: 180ns
● 1.8V Control Logic
● Reduced Switching Errors
● Reduced Glitching
● Improved Data Throughput
● Reduced Power Consumption
● Increased Ruggedness
The SGM4588 and SGM4589 can be enabled/disabled
by controlling the EN pin. Besides, all control terminals
support 1.8V input logic over the full temperature range.
Other key features include low on-resistance, low power
consumption and low charge injection. When multiple
devices are stacked, the presence of the EN function
allows resetting the multiplexer/demultiplexer to a state
where all switches are off. Each channel blocks the
voltage to the power track in the off state.
● -40℃ to +85℃ Operating Temperature Range
● Available in Green SOIC-16 and TSSOP-16
Packages
APPLICATIONS
Communications Systems
Battery Powered Systems
Data Acquisition Systems
Single/Dual Signal Power Supply Systems
Medical Equipment
The high performances of SGM4588 and SGM4589
make them ideal for applications such as single/dual
signal power supply systems, ATE systems, high-speed
data acquisition systems and medical equipment.
The SGM4588 and SGM4589 are available in Green
SOIC-16 and TSSOP-16 packages. It is specified -40℃
to +85℃ temperature range.
SG Micro Corp
MAY 2015–REV. A
www.sg-micro.com
8-CH/Dual 4-CH High-Performance
CMOS Analog Multiplexers
SGM4588/9
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
SGM4588YS16
XXXXX
SOIC-16
TSSOP-16
SOIC-16
SGM4588YS16G/TR
Tape and Reel, 2500
Tape and Reel, 4000
Tape and Reel, 2500
Tape and Reel, 4000
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
SGM4588
SGM4588
YTS16
XXXXX
SGM4588YTS16G/TR
SGM4589YS16G/TR
SGM4589YTS16G/TR
SGM4589YS16
XXXXX
SGM4589
SGM4589
YTS16
XXXXX
TSSOP-16
MARKING INFORMATION
NOTE: XXXXX = Date Code and Vendor Code.
X X X X X
Vendor Code
Date Code - Week
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
OVERSTRESS CAUTION
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
Voltages Referenced to VEE
VCC ...............................................................................44V
GND .............................................................................25V
Digital Inputs (1), VS, VD
(VEE - 0.3V) to (VCC + 0.3V) or 20mA, whichever occurs first
Current (Any Terminal) .................................................30mA
Peak Current, SX or DX
ESD SENSITIVITY CAUTION
(Pulsed at 1ms, 10% Duty Cycle Max.) ......................100mA
Storage Temperature Range........................-65℃ to +150℃
Junction Temperature...................................................150℃
Lead Temperature (Soldering, 10s)..............................260℃
ESD Susceptibility
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
HBM.............................................................................4000V
MM.................................................................................300V
NOTE:
1. Internal diodes will clamp any signals on Sx, Dx, or INx that
exceed VCC or VEE. Limit the current through the forward
diode to the maximum ratings.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
RECOMMENDED OPERATING CONDITIONS
circuit design, or specifications without prior notice.
Operating Temperature Range.......................-40℃ to +85℃
SG Micro Corp
www.sg-micro.com
MAY 2015
2
8-CH/Dual 4-CH High-Performance
CMOS Analog Multiplexers
SGM4588/9
PIN CONFIGURATIONS
SGM4588 (TOP VIEW)
SGM4589 (TOP VIEW)
A1
A2
A1
A0
EN
VEE
S1
1
2
3
4
5
6
7
8
16
15
A0
EN
VEE
S1A
S2A
S3A
S4A
DA
1
2
3
4
5
6
7
8
16
15 GND
14 VCC
13 S1B
12 S2B
11 S3B
10 S4B
Decoders/Drivers
Decoders/Drivers
14 GND
13 VCC
12 S5
S2
S3
11 S6
S4
10 S7
D
9
S8
9
DB
SOIC-16/TSSOP-16
SOIC-16/TSSOP-16
SG Micro Corp
www.sg-micro.com
MAY 2015
3
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
SOIC-16
D
e
1.75
E1
E
5.60
0.65
1.27
RECOMMENDED LAND PATTERN (Unit: mm)
L
A
b
c
θ
A1
A2
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
1.750
0.250
1.550
0.510
0.250
MIN
MAX
0.069
0.010
0.061
0.020
0.010
0.402
0.157
0.244
A
A1
A2
b
1.350
0.100
1.350
0.330
0.170
9.800
3.800
5.800
0.053
0.004
0.053
0.013
0.006
0.386
0.150
0.228
c
D
E
10.200
4.000
6.200
E1
e
1.27 BSC
0.050 BSC
L
0.400
0°
1.270
8°
0.016
0°
0.050
8°
θ
NOTES:
1. Body dimensions do not include mode flash or protrusion.
2. This drawing is subject to change without notice.
SG Micro Corp
TX00012.000
www.sg-micro.com
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
TSSOP-16
D
E1
E
5.94
1.78
0.42
e
b
0.65
RECOMMENDED LAND PATTERN (Unit: mm)
L
A
A1
θ
H
c
A2
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
MIN
MAX
0.047
0.006
0.041
0.012
0.008
0.201
0.177
0.260
A
A1
A2
b
1.200
0.150
1.050
0.300
0.200
5.100
4.500
6.600
0.050
0.800
0.190
0.090
4.860
4.300
6.200
0.002
0.031
0.007
0.004
0.191
0.169
0.244
c
D
E
E1
e
0.650 BSC
0.25 TYP
0.026 BSC
0.01 TYP
L
0.500
1°
0.700
7°
0.02
1°
0.028
7°
H
θ
NOTES:
1. Body dimensions do not include mode flash or protrusion.
2. This drawing is subject to change without notice.
SG Micro Corp
TX00020.001
www.sg-micro.com
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
SOIC-16
13″
13″
16.4
12.4
6.5
6.9
10.3
5.6
2.1
1.2
4.0
4.0
8.0
8.0
2.0
2.0
16.0
12.0
Q1
Q1
TSSOP-16
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
13″
386
280
370
5
SG Micro Corp
www.sg-micro.com
TX20000.000
©2020 ICPDF网 联系我们和版权申明