SGM48759 [SGMICRO]
Dual Bilateral Analog Switch;
| 型号： | SGM48759 |
| 厂家： | 
Shengbang Microelectronics Co, Ltd |
| 描述： | Dual Bilateral Analog Switch |
| 文件： | 总7页 (文件大小：493K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SGM48759
Dual Bilateral Analog Switch
GENERAL DESCRIPTION
FEATURES
SGM48759 is dual bilateral analog switch which is
designed for 1.65V to 5.5V VCC operation. The device
can support up to 5.5V bidirectional signal transmission.
It can be flexibly applied to digital and analog signal
processing systems.
● Supply Voltage Range: 1.65V to 5.5V
● Low On-Resistance: 4.5Ω (TYP) at VCC = 4.5V
● With No VCC Connected in the System, the
Control Pins can Accept Voltages up to 5.5V
● Propagation Delay Time, tPD:
0.65ns (TYP) at VCC = 3.3V
The SGM48759 is a dual channel single-pole/single-
throw (SPST) switch. Each channel of SGM48759 is
completely independent and can be controlled by its own
enable-input control pin (C).
● High On-Off Output Voltage Ratio
● High Degree of Linearity
● Rail-to-Rail Input and Output Operation
● -40℃ to +125℃ Operating Temperature Range
● Available in Green VSSOP-8 and MSOP-8 Packages
The SGM48759 is available in Green VSSOP-8 and
MSOP-8 packages.
APPLICATIONS
Computer Peripherals
Portable Equipment
Sample-and-Hold Circuits
LOGIC DIAGRAM
1A
1C
1B
Figure 1. Logic Diagram
SG Micro Corp
MARCH 2023 – REV. A
www.sg-micro.com
SGM48759
Dual Bilateral Analog Switch
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
041
XXXX
VSSOP-8
MSOP-8
SGM48759XVS8G/TR
Tape and Reel, 3000
Tape and Reel, 4000
-40℃ to +125℃
-40℃ to +125℃
SGM48759
SGM03Y
XMS8
XXXXX
SGM48759XMS8G/TR
MARKING INFORMATION
NOTE: XXXX = Date Code, Trace Code and Vendor Code. XXXXX = Date Code, Trace Code and Vendor Code.
VSSOP-8
MSOP-8
X X X X X
Serial Number
Y Y Y
X X X X
Vendor Code
Trace Code
Vendor Code
Trace Code
Date Code - Year
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
2. If the input and output clamp-current ratings are observed,
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VCC (1) ...................................... -0.5V to 6.5V
the input and output negative voltage ratings may be
Control Input Voltage, VIN (1) (2) .......................... -0.5V to 6.5V
exceeded.
Switch I/O Voltage, VI/O (1) (2) (3) .............. -0.5V to (VCC + 0.5V)
Control Input Clamp Current, IIK, VIN < 0V ....................-50mA
I/O Port Diode Current, II/OK, VI/O < 0V .........................-50mA
On-State Switch Current, IT, VI/O = 0V to VCC..............±50mA
Junction Temperature.................................................+150℃
Storage Temperature Range.......................-65℃ to +150℃
Lead Temperature (Soldering, 10s)............................+260℃
ESD Susceptibility
3. The maximum value is 6.5V.
OVERSTRESS CAUTION
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
HBM.............................................................................7000V
CDM ............................................................................1000V
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
RECOMMENDED OPERATING CONDITIONS
Supply Voltage, VCC..........................................1.65V to 5.5V
I/O Port Voltage, VI/O............................................... 0V to VCC
Control Input Voltage, VIN ......................................0V to 5.5V
Input Transition Rise or Fall Time, Δt/ΔV
VCC = 1.65V to 1.95V.................................................. 20ns/V
V
CC = 2.3V to 2.7V...................................................... 20ns/V
VCC = 3.0V to 3.6V...................................................... 10ns/V
VCC = 4.5V to 5.5V...................................................... 10ns/V
Operating Temperature Range, TA ..............-40℃ to +125℃
DISCLAIMER
SG Micro Corp reserves the right to make any change in
NOTES:
circuit design, or specifications without prior notice.
1. All voltages reference ground, unless otherwise noted.
SG Micro Corp
www.sg-micro.com
MARCH 2023
2
SGM48759
Dual Bilateral Analog Switch
PIN CONFIGURATIONS
(TOP VIEW)
1
2
3
4
8
7
6
5
VCC
1C
1A
1B
2C
2B
GND
2A
VSSOP-8/MSOP-8
PIN DESCRIPTION
PIN
1
NAME
1A
I/O
FUNCTION
I/O
I/O
I
Analog Switch 1A Input/Output Port.
Analog Switch 1B Input/Output Port.
Control Signal Input Port of Channel 2.
Ground Pin.
2
1B
3
2C
4
GND
2A
－
I/O
I/O
I
5
Analog Switch 2A Input/Output Port.
Analog Switch 2B Input/Output Port.
Control Signal Input Port of Channel 1.
Power Supply Input Pin.
6
2B
7
1C
8
VCC
－
FUNCTION TABLE
CONTROL INPUT (C)
SWITCH
OFF
L
H
ON
SG Micro Corp
www.sg-micro.com
MARCH 2023
3
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
VSSOP-8
D
e
E1
E
3.10
0.75
b
0.25
0.50
RECOMMENDED LAND PATTERN (Unit: mm)
L
ccc C
A2
A1
A
SEATING PLANE
θ
c
L1
C
Dimensions In Millimeters
Symbol
MIN
-
MOD
MAX
0.900
0.100
0.800
0.270
0.180
2.100
2.400
3.200
A
A1
A2
b
-
-
0
0.650
0.170
0.100
1.900
2.200
3.000
-
c
D
-
E
-
E1
e
-
0.500 BSC
L
0.200
0°
-
0.120 BSC
-
0.350
6°
L1
θ
ccc
0.100
NOTES:
1. This drawing is subject to change without notice.
2. The dimensions do not include mold flashes, protrusions or gate burrs.
3. Reference JEDEC MO-187 CA.
SG Micro Corp
TX00317.000
www.sg-micro.com
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
MSOP-8
b
E1
E
4.8
1.02
e
0.41
0.65
RECOMMENDED LAND PATTERN (Unit: mm)
D
L
A
c
A1
θ
A2
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
1.100
0.150
0.950
0.380
0.230
3.100
3.100
5.050
MIN
MAX
0.043
0.006
0.037
0.015
0.009
0.122
0.122
0.199
A
A1
A2
b
0.820
0.020
0.750
0.250
0.090
2.900
2.900
4.750
0.032
0.001
0.030
0.010
0.004
0.114
0.114
0.187
c
D
E
E1
e
0.650 BSC
0.026 BSC
L
0.400
0°
0.800
6°
0.016
0°
0.031
6°
θ
NOTES:
1. Body dimensions do not include mode flash or protrusion.
2. This drawing is subject to change without notice.
SG Micro Corp
TX00014.000
www.sg-micro.com
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
VSSOP-8
MSOP-8
7″
9.5
2.25
5.20
3.35
3.30
1.05
1.50
4.0
4.0
4.0
8.0
2.0
2.0
8.0
Q3
Q1
13″
12.4
12.0
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
7″ (Option)
368
442
386
227
410
280
224
224
370
8
18
5
7″
13″
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号：
©2020 ICPDF网 联系我们和版权申明