SGM7SZ32 [SGMICRO]
Small Logic Two-Input OR Gate;型号: | SGM7SZ32 |
厂家: | Shengbang Microelectronics Co, Ltd |
描述: | Small Logic Two-Input OR Gate 栅 |
文件: | 总10页 (文件大小:599K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SGM7SZ32
Small Logic Two-Input OR Gate
GENERAL DESCRIPTION
FEATURES
The SGM7SZ32 is a single two-input OR gate with
advanced CMOS technology. The supply voltage pin of
this device accepts any voltage from 1.65V to 5.5V.
Inputs can tolerate a maximum of 6V, regardless of the
supply voltage range. When VCC is at 0V, the inputs and
output are in the high-impedance state.
● Wide Supply Voltage Range: 1.65V to 5.5V
● Ultra-High Speed: tPD of 3.8ns (TYP) into 50pF at
VCC = 3.3V
● Support LCX Performance at VCC = 3.3V
● High Output Drive: ±24mA at VCC = 3V
● Inputs Over-Voltage Tolerance Makes 5V to 3V
Translation Available
This device can achieve ultra-high speed operation with
high output drive, while the low static power dissipation
over the wide supply voltage operating range is
maintained.
● Power Down High-Impedance Inputs/Output
● Available in Green SOT-23-5 and SC70-5 Packages
The SGM7SZ32 is available in Green SOT-23-5 and
SC70-5 packages. It operates over an ambient
temperature range of -40℃ to +85℃.
LOGIC SYMBOL
FUNCTION TABLE
INPUTS
OUTPUT
A
Y
A
L
B
L
Y
L
B
L
H
L
H
H
H
H
H
H
Y = A + B
H = HIGH Logic Level
L = LOW Logic Level
SG Micro Corp
SEPTEMBER 2021 – REV. A. 1
www.sg-micro.com
SGM7SZ32
Small Logic Two-Input OR Gate
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
SC70-5
SGM7SZ32YC5G/TR
SGM7SZ32YN5G/TR
SFAXX
SFBXX
Tape and Reel, 3000
Tape and Reel, 3000
-40℃ to +85℃
-40℃ to +85℃
SGM7SZ32
SOT-23-5
MARKING INFORMATION
NOTE: XX = Date Code.
YYY X X
Date Code - Month
Date Code - Year
Serial Number
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
OVERSTRESS CAUTION
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VCC .......................................... -0.5V to 6.0V
DC Input Voltage, VIN........................................ -0.5V to 6.0V
DC Output Voltage, VOUT .................................. -0.5V to 6.0V
DC Input Diode Current, IIK
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
(VIN < -0.5V).................................................................-50mA
DC Output Diode Current, IOK
(VOUT < -0.5V) ..............................................................-50mA
DC Output Current, IOUT..............................................±50mA
DC VCC or Ground Current, ICC or IGND........................±50mA
Junction Temperature.................................................+150℃
Storage Temperature Range.......................-65℃ to +150℃
Lead Temperature (Soldering, 10s)............................+260℃
ESD Susceptibility
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
HBM.............................................................................8000V
MM.................................................................................400V
RECOMMENDED OPERATING CONDITIONS
Operating Temperature Range.......................-40℃ to +85℃
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, or specifications without prior notice.
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
2
SGM7SZ32
Small Logic Two-Input OR Gate
PIN CONFIGURATIONS
(TOP VIEW)
A
B
1
2
VCC
5
4
GND
3
Y
SOT-23-5/SC70-5
PIN DESCRIPTION
PIN
1
NAME
A
FUNCTION
Input. Unused input must be held high or low. It may not float.
2
B
Input. Unused input must be held high or low. It may not float.
3
GND
Y
Ground.
4
Output.
5
VCC
Power Supply.
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
3
SGM7SZ32
Small Logic Two-Input OR Gate
ELECTRICAL CHARACTERISTICS
(TA = -40℃ to +85℃, typical values are at TA = +25℃, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
VCC (V)
MIN
TYP
MAX
UNITS
General
Power Supply Range
Supply Voltage Data Retention
Input Voltage
1.65
1.50
0.00
0.00
0
5.50
5.50
5.50
VCC
20
V
V
V
V
VCC
VIN
Output Voltage
VOUT
1.8, 2.5 ± 0.2
3.3 ± 0.3
Input Rise and Fall Times
tr, tf
0
10
ns/V
5.0 ± 0.5
0
5
DC Performance
HIGH Level Input Voltage
LOW Level Input Voltage
VIH
VIL
1.65 to 5.5
1.65 to 5.5
1.65
0.75VCC
V
V
0.25VCC
1.62
1.77
2.27
2.97
4.47
1.46
2.03
2.51
2.34
4.01
1.65
1.80
2.30
3.00
4.50
1.55
2.18
2.81
2.70
4.20
0.00
0.00
0.00
0.00
0.00
0.06
0.09
0.16
0.24
0.29
±0.10
0.10
0.10
1.80
IOH = -100µA
2.30
3.00
4.50
HIGH Level Output Voltage
VOH
VIN = VIH
V
IOH = -4mA
IOH = -8mA
IOH = -16mA
IOH = -24mA
IOH = -32mA
1.65
2.30
3.00
3.00
4.50
1.65
0.02
0.02
0.02
0.02
0.02
0.11
0.17
0.32
0.49
0.55
±5
1.80
IOL = 100µA
2.30
3.00
4.50
LOW Level Output Voltage
VOL
VIN = VIL
V
IOL = 4mA
IOL = 8mA
IOL = 16mA
IOL = 24mA
IOL = 32mA
1.65
2.30
3.00
3.00
4.50
Input Leakage Current
IIN
IOFF
ICC
VIN = 5.5V, GND
VIN or VOUT = 5.5V
VIN = 5.5V, GND
0 to 5.5
0
μA
μA
μA
Power Off Leakage Current
Quiescent Supply Current
5
1.65 to 5.5
10
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
4
SGM7SZ32
Small Logic Two-Input OR Gate
ELECTRICAL CHARACTERISTICS (continued)
(TA = -40℃ to +85℃, typical values are at TA = +25℃, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
AC Performance
VCC = 1.65V
VCC = 1.80V
9.9
8.1
4.6
3.5
2.7
CL = 15pF,
RL = 1MΩ,
Figure 1, Figure 2
VCC = 2.50V ± 0.20V
VCC = 3.30V ± 0.30V
VCC = 5.00V ± 0.50V
Propagation Delay
Input Capacitance
tPHL, tPLH
ns
CL = 50pF,
RL = 500Ω,
Figure 1, Figure 2
VCC = 3.30V ± 0.30V
3.8
VCC = 5.00V ± 0.50V
VCC = 0V
3.0
4.0
CIN
pF
pF
VCC = 3.30V
17.0
19.0
Power Dissipation
Capacitance (2)
CPD
Figure 3
VCC = 5.00V
NOTES:
1. Unused inputs must be held HIGH or LOW. They may not float.
2. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current
consumption (ICCD) at no output loading and operating at 50% duty cycle (see Figure 3). CPD is related to dynamic operating
current ICCD by the expression: ICCD = (CPD) (VCC) (fIN) + (ICC,Static).
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
5
SGM7SZ32
Small Logic Two-Input OR Gate
TEST CIRCUITS
tr = 3ns
tf = 3ns
VCC
90%
50%
90%
50%
VCC
INPUT
10%
10%
GND
VOH
INPUT
tW
OUTPUT
tPLH
tPHL
CL
RL
OUTPUT
50%
50%
CL includes load and stray capacitance;
Input PRR = 10MHz; tW = 500ns.
VOL
Figure 2. AC Waveforms
Figure 1. AC Test Circuit
VCC
A
INPUT
Input = AC Waveform; tr = tf = 1.8ns;
PRR = 10MHz; Duty Cycle = 50%.
Figure 3. ICCD Test Circuit
REVISION HISTORY
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
SEPTEMBER 2021 ‒ REV.A to REV.A.1
Page
Updated Package Outline Dimensions section ....................................................................................................................................................8
Changes from Original (OCTOBER 2013) to REV.A
Page
Changed from product preview to production data.............................................................................................................................................All
SG Micro Corp
www.sg-micro.com
SEPTEMBER 2021
6
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
SOT-23-5
1.90
D
e1
2.59
E1
E
0.99
b
e
0.95
0.69
RECOMMENDED LAND PATTERN (Unit: mm)
L
A
A1
c
θ
0.2
A2
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
1.250
0.100
1.150
0.500
0.200
3.020
1.700
2.950
MIN
MAX
0.049
0.004
0.045
0.020
0.008
0.119
0.067
0.116
A
A1
A2
b
1.050
0.000
1.050
0.300
0.100
2.820
1.500
2.650
0.041
0.000
0.041
0.012
0.004
0.111
0.059
0.104
c
D
E
E1
e
0.950 BSC
1.900 BSC
0.037 BSC
0.075 BSC
e1
L
0.300
0°
0.600
8°
0.012
0°
0.024
8°
θ
NOTES:
1. Body dimensions do not include mode flash or protrusion.
2. This drawing is subject to change without notice.
SG Micro Corp
TX00033.000
www.sg-micro.com
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
SC70-5
D
e1
0.65
e
1.9
E1
E
0.75
b
0.4
1.3
RECOMMENDED LAND PATTERN (Unit: mm)
L
L1
A
A1
A2
c
θ
0.20
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
1.100
0.100
1.000
0.350
0.220
2.200
1.350
2.450
MIN
MAX
A
A1
A2
b
0.800
0.000
0.800
0.150
0.080
2.000
1.150
2.150
0.031
0.000
0.031
0.006
0.003
0.079
0.045
0.085
0.043
0.004
0.039
0.014
0.009
0.087
0.053
0.096
c
D
E
E1
e
0.65 TYP
1.300 BSC
0.525 REF
0.026 TYP
0.051 BSC
0.021 REF
e1
L
L1
θ
0.260
0°
0.460
8°
0.010
0°
0.018
8°
NOTES:
1. Body dimensions do not include mode flash or protrusion.
2. This drawing is subject to change without notice.
SG Micro Corp
TX00043.001
www.sg-micro.com
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
SOT-23-5
SC70-5
7″
7″
9.5
9.5
3.20
2.25
3.20
2.55
1.40
1.20
4.0
4.0
4.0
4.0
2.0
2.0
8.0
8.0
Q3
Q3
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
7″ (Option)
7″
368
442
227
410
224
224
8
18
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明